NAME

       liebert-esp2 - Driver for Liebert UPS, using the ESP-II serial protocol

NOTE

       This man page only documents the hardware-specific features of the liebert-esp2 driver.
       For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This is an experimental driver. You have been warned.

EXTRA ARGUMENTS

       This driver supports the following optional settings in ups.conf(5):

       baudrate=num
           Set the speed of the serial connection - 1200, 2400 (default), 4800, 9600 or 19200.

AUTHOR

       Richard Gregory <R.Gregory at liverpool.ac.uk>, Arjen de Korte <adkorte-guest at
       alioth.debian.org>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/