Provided by: lldpd_0.7.7-1_amd64 bug

NAME

     lldpcli, lldpctl — control LLDP daemon

SYNOPSIS

     lldpcli [-dv] [-u file] [-f format] [-c file] [command ...]
     lldpctl [-dv] [-u file] [-f format] [interfaces ...]

DESCRIPTION

     The lldpcli program controls lldpd(8) daemon.

     When no command is specified, lldpcli will start an interactive shell which can be used to
     input arbitrary commands as if they were specified on the command line. This interactive
     shell should provide completion and history support.

     The options are as follows:

     -d      Enable more debugging information.

     -u      Specify the Unix-domain socket used for communication with lldpd(8).

     -v      Show lldpcli version.

     -f format
             Choose the output format. Currently plain, xml, json and keyvalue formats are
             available. The default is plain.

     -c file
             Read the given configuration file. This option may be repeated several times. If a
             directory is provided, each file contained in it will be read  if ending by .conf.
             Order is alphabetical.

     When invoked as lldpctl, lldpcli will display detailed information about each neighbors on
     the specified interfaces or on all interfaces if none are specified. This command is mostly
     kept for backward compatibility with older versions.

     The following commands are supported by lldpcli.  When there is no ambiguity, the keywords
     can be abbreviated. For example, show neighbors ports eth0 summary and sh neigh p eth0 sum
     are the same command.

       exit

             Quit lldpcli.

       help [...]

             Display general help or help about a command. Also, you can get help using the
             completion or by pressing the ?  key. However, completion and inline help may be
             unavailable if lldpcli was compiled without readline support but help command is
             always available.

       show neighbors [ports ethX [,...]] [details | summary] [hidden]

             Display information about each neighbor known by lldpd(8) daemon. With summary, only
             a the name and the port description of each remote host will be displayed. On the
             other hand, with details, all available information will be displayed, giving a
             verbose view. When using hidden, also display remote ports hidden by the smart
             filter. When specifying one or several ports, the information displayed is limited
             to the given list of ports.

       watch [ports ethX [,...]] [details | summary] [hidden]

             Watch for any neighbor changes and report them as soon as they happen. When
             specifying ports, the changes are only reported when happening on the given ports.
             hidden, summary and details have the same meaning than previously described.

       show configuration

             Display global configuration of lldpd(8) daemon.

       show statistics [ports ethX [,...]] [summary]

             Report LLDP-related statistics, like the number of LLDPDU transmitted, received,
             discarded or unrecognized. When specifying ports, only the statistics from the given
             port are reported. With summary the statistics of each port is summed.

       update

             Make lldpd(8) update its information and send new LLDP PDU on all interfaces.

       configure system description description

             Override chassis description with the provided value instead of using kernel name,
             node name, kernel version, build date and architecture.

       configure system platform description

             Override platform description with the provided value instead of using kernel name.
             This value is currently only used for CDP.

       configure system interface pattern pattern

             Set the pattern of valid interfaces to use. When not set, lldpd will listen on all
             available interfaces. This option can use wildcards. Several interfaces can be
             specified separated by commas.  It is also possible to blacklist an interface by
             suffixing it with an exclamation mark. When an interface is both specified with and
             without an exclamation mark, it is blacklisted. For example, with eth*,!eth1,!eth2
             lldpd will only listen to interfaces starting by eth with the exception of eth1 and
             eth2.

       configure system interface description

             Some OS allows the user to set a description for an interface. Setting this option
             will enable lldpd to override this description with the name of the peer neighbor if
             one is found or with the number of neighbors found.

       configure lldp tx-interval interval

             Change transmit delay to the specified value in seconds. The transmit delay is the
             delay between two transmissions of LLDP PDU. The default value is 30 seconds.

       configure lldp tx-hold hold

             Change transmit hold value to the specified value. This value is used to compute the
             TTL of transmitted packets which is the product of this value and of the transmit
             delay. The default value is 4 and therefore the default TTL is 120 seconds.

       configure system bond-slave-src-mac-type value

             Set the type of src mac in lldp frames sent on bond slaves

             Valid types are:
               real  Slave real mac
               zero  All zero mac
               fixed
                     An arbitrary fixed value (from a 3Com card)
               local
                     Real mac with locally administered bit set. If the real mac already has the
                     locally administered bit set, default to the fixed value.

             Default value for bond-slave-src-mac-type is fixed

       configure med fast-start enable | tx-interval interval

             Configure LLDP-MED fast start mechanism. When a new LLDP-MED-enabled neighbor is
             detected, fast start allows lldpd to shorten the interval between two LLDPDU.
             enable should enable LLDP-MED fast start while tx-interval specifies the interval
             between two LLDPDU in seconds. The default interval is 1 second. Once 4 LLDPDU have
             been sent, the fast start mechanism is disabled until a new neighbor is detected.

       unconfigure med fast-start

             Disable LLDP-MED fast start mechanism.

       configure [ports ethX [,...]] med location coordinate latitude latitude longitude
       longitude altitude altitude unit datum datum

             Advertise a coordinate based location on the given ports (or on all ports if no port
             is specified). The format of latitude is a decimal floating point number followed
             either by N or S.  The format of longitude is a decimal floating point number
             followed either by E or W.  altitude is a decimal floating point number followed
             either by m when expressed in meters or f when expressed in floors. A space is
             expected between the floating point number and the unit.  datum is one of those
             values:
                        WGS84
                        NAD83
                        NAD83/MLLW

             A valid use of this command is:
                   configure ports eth0 med location coordinate latitude 48.85667N longitude
                   2.2014E altitude 117.47 m datum WGS84

       configure [ports ethX [,...]] med location address country country [type value [...]]

             Advertise a civic address on the given ports (or on all ports if no port is
             specified).  country is the two-letter code representing the country. The remaining
             arguments should be paired to form the address. The first member of each pair
             indicates the type of the second member which is a free-form text. Here is the list
             of valid types:
                        language
                        country-subdivision
                        county
                        city
                        city-division
                        block
                        street
                        direction
                        trailing-street-suffix
                        street-suffix
                        number
                        number-suffix
                        landmark
                        additional
                        name
                        zip
                        building
                        unit
                        floor
                        room
                        place-type
                        script

             A valid use of this command is:
                   configure ports eth1 med location address US street "Commercial Road" city
                   "Roseville"

       configure [ports ethX [,...]] med location elin number

             Advertise the availability of an ELIN number. This is used for setting up emergency
             call. If the provided number is too small, it will be padded with 0. Here is an
             example of use:
                   configure ports eth2 med location elin 911

       configure [ports ethX [,...]] med policy application application [unknown] [vlan vlan]
       [priority priority] [dscp dscp]

             Advertise a specific network policy for the given ports (or for all ports if no port
             was provided). Only the application type is mandatory.  application should be one of
             the following values: static const struct value_string port_med_policy_map[] = {
                        voice
                        voice-signaling
                        guest-voice
                        guest-voice-signaling
                        softphone-voice
                        video-conferencing
                        streaming-video
                        video-signaling

             The unknown flag tells that the network policy for the specified application type is
             required by the device but is currently unknown. This is used by Endpoint Devices,
             not by Network Connectivity Devices. If not specified, the network policy for the
             given application type is defined.

             When a VLAN is specified with vlan tells which 802.1q VLAN ID has to be advertised
             for the network policy. A valid value is between 1 and 4094.  priority allows one to
             specify IEEE 802.1d / IEEE 802.1p Layer 2 Priority, also known as Class of Service
             (CoS), to be used for the specified application type. It should be one of those
             values:
                        background
                        spare
                        best-effort
                        excellent-effort
                        controlled-load
                        video
                        voice
                        network-control

             dscp represents the DSCP value to be advertised for the given network policy.
             DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474
             for the specified application type. Value: 0 (default per RFC 2475) through 63.
             Note: The class selector DSCP values are backwards compatible for devices that only
             support the old IP precedence Type of Service (ToS) format. (See the RFCs for what
             these values mean)

             A valid use of this command is:
                   configure med policy application voice vlan 500 priority voice dscp 46

       configure [ports ethX [,...]] med power pse | pd source source priority priority value
       value

             Advertise the LLDP-MED POE-MDI TLV for the given ports or for all interfaces if no
             port is provided.  One can act as a PD (power consumer) or a PSE (power provider).
             No check is done on the validity of the parameters while LLDP-MED requires some
             restrictions:

                PD shall never request more power than physical 802.3af class.

                PD shall never draw more than the maximum power advertised by PSE.

                PSE shall not reduce power allocated to PD when this power is in use.

                PSE may request reduced power using conservation mode

                Being PSE or PD is a global paremeter, not a per-port parameter.  lldpcli does
                 not enforce this: a port can be set as PD or PSE. LLDP-MED also requires for a
                 PSE to only have one power source (primary or backup). Again, lldpcli does not
                 enforce this. Each port can have its own power source. The same applies for PD
                 and power priority. LLDP-MED MIB does not allow this kind of representation.

             Valid types are:
               pse   Power Sourcing Entity (power provider)
               pd    Power Device (power consumer)

             Valid sources are:
               unknown  Unknown
               primary  For PSE, the power source is the primary power source.
               backup   For PSE, the power source is the backup power source or a power
                        conservation mode is asked (the PSE may be running on UPS for example).
               pse      For PD, the power source is the PSE.
               local    For PD, the power source is a local source.
               both     For PD, the power source is both the PSE and a local source.

             Valid priorities are:
               unknown    Unknown priority
               critical   Critical
               high       High
               low        Low

             value should be the total power in milliwatts required by the PD device or available
             by the PSE device.

             Here is an example of use:
                   configure med power pd source pse priority high value 5000

       configure [ports ethX [,...]] dot3 power pse | pd [supported] [enabled] [paircontrol]
       powerpairs powerpairs [class class] [type type source source priority priority requested
       requested allocated allocated]

             Advertise Dot3 POE-MDI TLV for the given port or for all ports if none was provided.
             One can act as a PD (power consumer) or a PSE (power provider). This configuration
             is distinct of the configuration of the transmission of the LLDP-MED POE-MDI TLV but
             the user should ensure the coherency of those two configurations if they are used
             together.

             supported means that MDI power is supported on the given port while enabled means
             that MDI power is enabled.  paircontrol is used to indicate if pair selection can be
             controlled. Valid values forr powerpairs are:
               signal  The signal pairs only are in use.
               spare   The spare pairs only are in use.

             When specified, class is a number between 0 and 4.

             The remaining parameters are in conformance with 802.3at and are optional.  type
             should be either 1 or 2, indicating which if the device conforms to 802.3at type 1
             or 802.3at type 2. Values ofr source and priority are the same as for LLDP-MED POE-
             MDI TLV.  requested and allocated are expressed in milliwats.

             Here are two valid uses of this command:
                   configure ports eth3 dot3 power pse supported enabled paircontrol powerpairs
                   spare class 3
                   configure dot3 power pd supported enabled powerpairs spare class 3 type 1
                   source pse priority low requested 10000 allocated 15000

       pause

             Pause lldpd operations.  lldpd will not send any more frames or receive ones. This
             can be undone with resume command.

       resume

             Resume lldpd operations.  lldpd will start to send and receive frames. This command
             is issued internally after processing configuration but can be used at any time if a
             manual pause command is issued.

FILES

     /var/run/lldpd.socket    Unix-domain socket used for communication with lldpd(8).

SEE ALSO

     lldpd(8)

AUTHORS

     The lldpcli program was written by Vincent Bernat <bernat@luffy.cx>.