Provided by: mosquitto_0.15-2+deb7u3ubuntu0.1_amd64 
NAME
mosquitto - an mqtt broker
SYNOPSIS
mosquitto [-c config file] [-d | --daemon] [-p port number]
DESCRIPTION
mosquitto is a broker for the mqtt protocol version 3.1.
OPTIONS
-c, --config-file
Load configuration from a file. If not given, the default values as described in
mosquitto.conf(5) are used.
-d, --daemon
Run mosquitto in the background as a daemon. All other behaviour remains the same.
-p, --port
Listen on the port specified instead of the default 1883. This acts in addition to
the port setting in the config file. May be specified multiple times to open
multiple sockets listening on different ports. This socket will be bound to all
network interfaces.
LIMITATIONS
mosquitto implements all of the mqtt protocol version 3.1, but there are some limitations
compared to rsmb.
• There are fewer configuration options.
• There is less logging information.
• It isn't as well tested or documented...
It should be noted that all of the above limitations should have "currently" included in
them. They will all be fixed at some point.
BROKER STATUS
Clients can find information about the broker by subscribing to topics in the $SYS
hierarchy as follows. Topics marked as static are only sent once per client on
subscription. All other topics are updated every sys_interval seconds. If sys_interval is
0, then updates are not sent.
$SYS/broker/bytes/per second/received
The average number of bytes received per second since the broker started.
$SYS/broker/bytes/per second/sent
The average number of bytes sent per second since the broker started.
$SYS/broker/bytes/received
The total number of bytes received since the broker started.
$SYS/broker/bytes/sent
The total number of bytes sent since the broker started.
$SYS/broker/changeset
The repository changeset (revision) associated with this build. Static.
$SYS/broker/clients/active
The number of currently connected clients
$SYS/broker/clients/inactive
The total number of persistent clients (with clean session disabled) that are
registered at the broker but are currently disconnected.
$SYS/broker/clients/maximum
The maximum number of active clients that have been connected to the broker. This
is only calculated when the $SYS topic tree is updated, so short lived client
connections may not be counted.
$SYS/broker/clients/total
The total number of active clients currently connected to the broker.
$SYS/broker/heap/current size
The current size of the heap memory in use by mosquitto. Note that this topic may
be unavailable depending on compile time options.
$SYS/broker/heap/maximum size
The largest amount of heap memory used by mosquitto. Note that this topic may be
unavailable depending on compile time options.
$SYS/broker/messages/inflight
The number of messages with QoS>0 that are awaiting acknowledgments.
$SYS/broker/messages/per second/received
The average number of messages received per second since the broker started.
$SYS/broker/messages/per second/sent
The average number of messages sent per second since the broker started.
$SYS/broker/messages/received
The total number of messages received since the broker started.
$SYS/broker/messages/sent
The total number of messages sent since the broker started.
$SYS/broker/messages/stored
The number of messages currently held in the message store.
$SYS/broker/timestamp
The timestamp at which this particular build of the broker was made. Static.
$SYS/broker/uptime
The amount of time in seconds the broker has been online.
$SYS/broker/version
The version of the broker. Static.
WILDCARD TOPIC SUBSCRIPTIONS
In addition to allowing clients to subscribe to specific topics, mosquitto also allows the
use of two wildcards in subscriptions. + is the wildcard used to match a single level of
hierarchy. For example, for a topic of "a/b/c/d", the following example subscriptions will
match:
• a/b/c/d
• +/b/c/d
• a/+/c/d
• a/+/+/d
• +/+/+/+
The following subscriptions will not match:
• a/b/c
• b/+/c/d
• +/+/+
The second wildcard is # and is used to match all subsequent levels of hierarchy. With a
topic of "a/b/c/d", the following example subscriptions will match:
• a/b/c/d
• #
• a/#
• a/b/#
• a/b/c/#
• +/b/c/#
The $SYS hierarchy does not match a subscription of "#". If you want to observe the entire
$SYS hierarchy, subscribe to $SYS/#.
Note that the wildcards must be only ever used on their own, so a subscription of "a/b+/c"
is not valid use of a wildcard. The # wildcard must only ever be used as the final
character of a subscription.
BRIDGES
Multiple brokers can be connected together with the bridging functionality. This is useful
where it is desirable to share information between locations, but where not all of the
information needs to be shared. An example could be where a number of users are running a
broker to help record power usage and for a number of other reasons. The power usage could
be shared through bridging all of the user brokers to a common broker, allowing the power
usage of all users to be collected and compared. The other information would remain local
to each broker.
For information on configuring bridges, see mosquitto.conf(5).
SIGNALS
SIGHUP Upon receiving the SIGHUP signal, mosquitto will attempt to reload configuration
file data, assuming that the -c argument was provided when mosquitto was started.
Not all configuration parameters can be reloaded without restarting. See
mosquitto.conf(5) for details.
SIGUSR1
Upon receiving the SIGUSR1 signal, mosquitto will write the persistence database to
disk. This signal is only acted upon if persistence is enabled.
SIGHUP Upon receiving the SIGHUP signal, mosquitto will attempt to reload its
configuration. Not all configuration parameters can be reloaded without a restart.
See mosquitto.conf(5) for details.
SIGUSR2
The SIGUSR2 signal causes mosquitto to print out the current subscription tree,
along with information about where retained messages exist. This is intended as a
testing feature only and may be removed at any time.
FILES
/etc/mosquitto/mosquitto.conf
Configuration file. See mosquitto.conf(5).
/var/lib/mosquitto/mosquitto.db
Persistent message data storage location if persist enabled.
/etc/hosts.allow, /etc/hosts.deny
Host access control via tcp-wrappers as described in hosts_access(5).
BUGS
mosquitto bug information can be found at http://launchpad.net/mosquitto
SEE ALSO
mqtt(7) mosquitto.conf(5) hosts_access(5) mosquitto_pub(1) mosquitto_sub(1)
libmosquitto(3)
THANKS
Thanks to Andy Stanford-Clark for being one of the people who came up with MQTT in the
first place and providing clarifications of the protocol.
Thanks also to everybody at the Ubuntu UK Podcast and Linux Outlaws for organising
OggCamp, where Andy gave a talk that inspired mosquitto.
AUTHOR
Roger Light <roger@atchoo.org>
5 February 2012 mosquitto(8)