Ubuntu Manpage: sg_safte - access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device

Provided by: sg3-utils_1.36-1ubuntu1_amd64

NAME

       sg_safte - access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device

SYNOPSIS

       sg_safte  [--config] [--devstatus] [--encstatus] [--flags] [--help] [--hex] [--insertions]
       [--raw] [--usage] [--verbose] [--version] DEVICE

DESCRIPTION

       Fetches enclosure status (via a SCSI READ BUFFER command).  The DEVICE should be a  SAF-TE
       device  which  may be a storage array controller (INQUIRY peripheral device type 0xc) or a
       generic processor device (INQUIRY peripheral device type 0x3).

       If no options are given (only the DEVICE argument) then the overall  enclosure  status  as
       reported by the option --config ®is reported.

OPTIONS

Arguments to long options are mandatory for short options as well. The options are
arranged in alphabetical order based on the long option name.

-c, --config
will issues a Read Enclosure Configuration ®(READ BUFFER ID 0) cdb to the device,
which returns a list of the enclosure hardware resources.

-d, --devstatus
will issue a Read Device Slot Status ®(READ BUFFER ID 4) cdb to the device, which
returns information about the current state of each drive or slot.

-s, --encstatus
will issue a Read Enclosure Status ®(READ BUFFER ID 1) cdb to the device, which
returns the operational state of the components.

-f, --flags
will issue a Read Global Flags ®(READ BUFFER ID 5) cdb to the device, which read
the most recent state of the global flags of the RAID processor device.

-h, --help
output the usage message then exit.

-H, --hex
output the response to a READ BUFFER command in ASCII hex to stdout. If used once,
output the response to the first READ BUFFER command (i.e. with buffer_id=0). This
should be the enclosure configuration. If used twice (or more often), the response
to subsequent READ BUFFER commands is output.

-i, --insertions
will issue a Read Device Insertions ®(READ BUFFER ID 3) cdb to the device, which
returns information about the number of times devices have been inserted whilst the
RAID system was powered on.

-r, --raw
output the response to a READ BUFFER command in binary to stdout. If used once,
output the response to the first READ BUFFER command (i.e. with buffer_id=0). This
should be the enclosure configuration. If used twice (or more often), the response
to subsequent READ BUFFER commands is output.

-u, --usage
will issue a Read Usage Statistics ®(READ BUFFER ID 2) cdb to the device, which
returns the information on total usage time and number of power-on cycles of the
RAID device.

-v, --verbose
increase the level of verbosity, (i.e. debug output).

-V, --version
print the version string and then exit.

NOTES

       The implementation is based on the intermediate review document eg as found at

       http://www.intel.com/design/servers/ipmi/saf-te.htm

       As the specification was never finalized this document serves as the de-facto standard.

       Similar functionality is provided by SPC-4 SCSI  Enclosure  Services  devices  (Peripheral
       device type 0xd), which can be queried with the sg_ses utility.

EXAMPLES

       To view the configuration:

          sg_safte /dev/sg1

       To view the device slot status:

          sg_safte --devstatus /dev/sg1

EXIT STATUS

       The exit status of sg_safte is 0 when it is successful. Otherwise see the sg3_utils(8) man
       page.

AUTHORS

       Written by Hannes Reinecke and Douglas Gilbert.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright © 2004-2012 Hannes Reinecke and Douglas Gilbert
       This software is distributed under a FreeBSD license. There is NO warranty; not  even  for
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.