Provided by: tripwire_2.4.2.2-3_amd64 
NAME
tripwire - a file integrity checker for UNIX systems
SYNOPSIS
tripwire { -m i | --init } [ options... ]
tripwire { -m c | --check } [ options... ]
[ object1 [ object2... ]]
tripwire { -m u | --update } [ options... ]
tripwire { -m p | --update-policy } [ options... ]
policyfile.txt
tripwire { -m t | --test } [ options... ]
DESCRIPTION
Database Initialization Mode
Running tripwire in Database Initialization mode is typically one of the first steps in
setting up Tripwire for regular operation. This mode creates a baseline database in the
location specified by the DBFILE variable in the Tripwire configuration file. The
database is essentially a snapshot of the objects residing on the system. During later
Tripwire integrity checks, this database serves as the basis for comparison.
When run in Database Initialization mode, tripwire reads the policy file, generates a
database based on its contents, and then cryptographically signs the resulting database.
Options can be entered on the command line to specify which policy, configuration, and key
files are used to create the database. The filename for the database can be specified as
well. If no options are specified, the default values from the current configuration file
are used.
Integrity Checking Mode
After building the Tripwire database, the next step is typically to run tripwire in
Integrity Checking mode. This mode scans the system for violations, as specified in the
policy file. Using the policy file rules, Tripwire will compare the state of the current
file system against the initial baseline database. An integrity checking report is
printed to stdout and is saved in the location specified by the REPORTFILE setting in the
Tripwire configuration file.
The generated report describes each policy file violation in detail, depending on whether
the specified file system object was added, deleted, or changed. Each report item lists
the properties of the object as it currently resides on the file system, and, if
appropriate, the old value stored in the database. If there are differences between the
database and the current system, the administrator can either fix the problem by replacing
the current file with the correct file (e.g., an intruder replaced /bin/login), or update
the database to reflect the new file (e.g., a fellow system administrator installed a new
version of /usr/local/bin/emacs). The (-I or --interactive) option launches an editor
that allows the user to update the database quickly. The Database Update mode of tripwire
can also be used.
Database Update Mode
Running tripwire in Database Update mode allows any differences between the database and
the current system to be reconciled. This will prevent the violation from showing up in
future reports. If the reported change is unexpected and potentially malicious, then the
changed file should be replaced with the original version. If there is a valid reason for
the change, the database must be changed to match the current files.
In Database Update mode, the items to be changed are specified in a "ballot box" in the
plain text report that is launched in an editor program. The entries to be updated are
specified by leaving the "x" next to each policy violation. After the user exits the
editor and provides the correct local passphrase, tripwire will update the database.
Options to control this operation include the (-Z or --secure-mode) and
(-a or --accept-all) flags.
Policy Update Mode
Policy update mode is used by tripwire to change or update the policy file and to
synchronize an earlier database with new policy file information. The filename of the new
clear text version of the policy file is specified on the command line. The new policy
file is compared to the existing version, and the database is updated according to the new
policy rules. Any changes in the database since the last integrity check will be detected
and reported. How these violations are interpreted depends on the security mode specified
with the (-Z or --secure-mode) option. In high security mode (the default), Tripwire will
print a list of violations and exit without making changes to the database. In low
security mode, the violations are still reported, but changes to the database are made
automatically.
Because the policy and database files are binary-encoded and cryptographically signed, the
user will be prompted for the site and local passphrases to change the policy settings.
After the database is successfully updated, the database and policy files are re-encoded
and signed.
Test Mode
Test mode is used to check the operation of the Tripwire email notification system. When
run in this mode, Tripwire will use the email notification settings specified in the
configuration file to send a test email message. If MAILMETHOD is set to SMTP, the
SMTPHOST and SMTPPORT values will be used to send email. If MAILMETHOD is set to
SENDMAIL, the MAILPROGRAM value will be used. If email notification is working correctly,
the address specified on the command line will receive the following message:
To: user@domain.com
From: user <user@domain.com>
Subject: Test email message from Tripwire
If you receive this message, email notification
from Tripwire is working correctly.
Test mode only tests email notification for the address specified on the command-line, and
does not check for errors in the syntax used with the emailto attribute in the policy
file.
OPTIONS
Database Initialization mode:
-m i --init
-v --verbose
-s --silent, --quiet
-c cfgfile --cfgfile cfgfile
-p polfile --polfile polfile
-d database --dbfile database
-S sitekey --site-keyfile sitekey
-L localkey --local-keyfile localkey
-P passphrase --local-passphrase passphrase
-e --no-encryption
-m i, --init
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Write to the specified database file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration and policy files.
-L localkey, --local-keyfile localkey
Use the specified local key file to write the new database file. Mutually
exclusive with (-e).
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to sign the new database. Mutually
exclusive with (-e).
-e, --no-encryption
Do not sign the database being stored. The database file will still be compressed
and will not be human-readable. Mutually exclusive with (-L) and (-P).
_________________________________________________________________________________________________
Integrity Checking mode:
-m c --check
-I --interactive
-v --verbose
-s --silent, --quiet
-c cfgfile --cfgfile cfgfile
-p polfile --polfile polfile
-d database --dbfile database
-r report --twrfile report
-S sitekey --site-keyfile sitekey
-L localkey --local-keyfile localkey
-P passphrase --local-passphrase passphrase
-n --no-tty-output
-V editor --visual editor
-E --signed-report
-i list --ignore list
-l { level | name } --severity { level | name }
-R rule --rule-name rule
-x section --section section
-M --email-report
-t { 0|1|2|3|4 } --email-report-level { 0|1|2|3|4 }
[ object1 [ object2... ]]
-m c, --check
Mode selector.
-I, --interactive
At the end of integrity checking, the resulting report is opened in an editor where
database updates can be easily specified using the ballot boxes included in the
report.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Use the specified database file.
-r report, --twrfile report
Write the specified report file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration and policy files.
-L localkey, --local-keyfile localkey
Use the specified local key file to read the database file and, if (-E) is
specified, to write the report file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to sign the database when (-I) is
used, and to sign the report when (-E) is used. Valid only with (-I) or (-E).
-n, --no-tty-output
Suppress the report from being printed at the console.
-V editor, --visual editor
Use the specified editor to edit the update ballot boxes. Meaningful only with
(-I).
-E, --signed-report
Specifies that the Tripwire report will be signed. If no passphrase is specified
on the command line, tripwire will prompt for the local passphrase.
-i list, --ignore list
Do not compute or compare the properties specified in list. Any of the letter
codes (abcdgimnprstulCHMS) specified in propertymasks can be excluded. Use of this
option overrides information from the policy file. The format to be used for list
is a double-quoted, comma-delimited list of properties (e.g. --ignore "p,c,m").
-l { level | name }, --severity { level | name }
Check only policy rules with severity greater than or equal to the given level.
The level may be specified as a number or as a name. Severity names are defined as
follows:
Low 33
Medium 66
High 100
Mutually exclusive with (-R).
-R rule, --rule-name rule
Check only the specified policy rule. Mutually exclusive with (-R).
-x section, --section section
Only check the rules in the specified section of the policy file. For Tripwire
2.4, FS is the only meaningful argument for this flag.
-M, --email-report
Specifies that reports be emailed to the recipient(s) designated in the policy
file.
-t level, --email-report-level level
Specifies the detail level of email reports, overriding the EMAILREPORTLEVEL
variable in the configuration file. level must be a number from 0 to 4. Valid only
with (-M).
[ object1 [ object2... ]]
List of files and directories that should be integrity checked. Default is all
files. If files are specified for checking, the --severity and --rule-name options
will be ignored.
_________________________________________________________________________________________________
Database Update mode:
-m u --update
-v --verbose
-s --silent, --quiet
-c cfgfile --cfgfile cfgfile
-p polfile --polfile polfile
-d database --dbfile database
-r report --twrfile report
-S sitekey --site-keyfile sitekey
-L localkey --local-keyfile localkey
-P passphrase --local-passphrase passphrase
-V editor --visual editor
-a --accept-all
-Z { low | high } --secure-mode { low | high }
-m u, --update
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Update the specified database file.
-r report, --twrfile report
Read the specified report file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration and policy files.
-L localkey, --local-keyfile localkey
Use the specified local key file to read the database file and report file, and to
re-write the database file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to sign the database.
-V editor, --visual editor
Use the specified editor to edit the update ballot boxes. Mutually exclusive with
(-a).
-a, --accept-all
Specifies that all the entries in the report file are updated without prompting.
Mutually exclusive with (-V).
-Z { low | high }, --secure-mode { low | high }
Specifies the security level, which affects how certain conditions are handled when
inconsistent information is found between the report file and the current database:
High: In high security mode, if a file does not match the properties in the report
file, Tripwire reports the differences as warnings, and exits without changing the
database.
Low: In low security mode, inconsistencies are reported as warnings, but the
changes are still made to the database.
_________________________________________________________________________________________________
Policy Update mode:
-m p --update-policy
-v --verbose
-s --silent, --quiet
-c cfgfile --cfgfile cfgfile
-p polfile --polfile polfile
-d database --dbfile database
-S sitekey --site-keyfile sitekey
-L localkey --local-keyfile localkey
-P passphrase --local-passphrase passphrase
-Q passphrase --site-passphrase passphrase
-Z { low | high } --secure-mode { low | high }
policyfile.txt
-m p, --update-policy
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Write the specified policy file.
-d database, --dbfile database
Use the specified database file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration file, and read and write
the policy file.
-L localkey, --local-keyfile localkey
Use the specified local key file to read and write the database file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to sign the database.
-Q passphrase, --site-passphrase passphrase
Specifies passphrase to be used with site key to sign the new policy file.
-Z { low | high }, --secure-mode { low | high }
Specifies the security level, which affects how certain conditions are handled when
the existing filesystem does not match the database information. Since the
database produced at the end of a policy update becomes the baseline for future
integrity checks, this consistency-checking ensures that no substantive filesystem
changes have occurred since the last integrity check.
High: In high security mode, if a file on the filesystem does not match the
properties in the database file, Tripwire reports the differences as warnings, and
exits without changing the database or the policy file.
Low: In low security mode, inconsistencies are reported as warnings, but the
changes are still made to the database and policy file.
policyfile.txt
Specifies the text policy file that will become the new policy file.
_________________________________________________________________________________________________
Test mode:
-m t --test
-e user@domain.com --email user@domain.com
-m t, --test
Mode selector.
-e user@domain.com, --email user@domain.com
Use the specified email address. This parameter must be supplied when test mode is
used. Only one address may be specified.
VERSION INFORMATION
This man page describes tripwire version 2.4
AUTHORS
Tripwire, Inc.
COPYING PERMISSIONS
Permission is granted to make and distribute verbatim copies of this man page provided the
copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this man page under the
conditions for verbatim copying, provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this man page into another
language, under the above conditions for modified versions, except that this permission
notice may be stated in a translation approved by Tripwire, Inc.
Copyright 2000 Tripwire, Inc. Tripwire is a registered trademark of Tripwire, Inc. in the
United States and other countries. All rights reserved.
SEE ALSO
twintro(8), twadmin(8), twprint(8), siggen(8), twconfig(4), twpolicy(4), twfiles(5)
The Design and Implementation of Tripwire: A UNIX File Integrity Checker by Gene Kim and
Eugene Spafford. Purdue Technical Report CSD-TR-93-071.
1 July 2000 TRIPWIRE(8)