Provided by: ipv6toolkit_2.0-1_amd64 bug

NAME

       addr6 - An IPv6 address analysis and manipulation tool

SYNOPSIS

       addr6  [-a  IPV6_ADDR -i]  [-d]  [-d]  [-q]  [-s]  [-j  PREFIX]  [-b  TYPE] [-k SCOPE] [-w
       UNICAST_TYPE] [-g IID_TYPE] [-J  PREFIX]  [-B  TYPE]  [-K  SCOPE]  [-W  UNICAST_TYPE]  [-G
       IID_TYPE] [-v] [-h]

DESCRIPTION

       addr6  is  an  IPv6  address  analysis  tool  tool.  It  can employed identify the address
       type/scope, and infer the type of Interface ID employed by an IPv6 address.  Additionally,
       addr6 can also produce statistics about a set of IPv6 addresses.

       addr6  can  filter  lists  of  IPv6 addresses based on a number of criteria (address type,
       address scope, prefixes, duplicate addresses, etc.).  There  are  two  types  of  filters:
       "block  filters"  and  "accept  filters".  If  any  "block  filter" is specified, and IPv6
       addresses matching any of those filters will be  discarded.  If  any  "accept  filter"  is
       specified, any IPv6 address matching that filter will be accepted (and printed on stdout).

OPTIONS

       addr6  takes  its parameters as command-line options. Each of the options can be specified
       with a short name (one character preceded with the hyphen character, as e.g. "-i") or with
       a long name (a string preceded with two hyphen characters, as e.g. "--stdin").

       -a IPV6_ADDRESS, --address IPV6_ADDRESS

              This  option  ca  be  employed to specify a single IPv6 address that is meant to be
              processed by the tool. This option is typically employed in  conjunction  with  the
              '-d' tool, to decode the IPv6 address in question.

       -i, --stdin

              This  option  request  the tool to read IPv6 addresses from standard input (stdin),
              until an EOF (End-Of-File) condition is found.

       -j PREFIX, --accept PREFIX

              Accept IPv6 addresses belonging to the specified IPv6 prefix (PREFIX/LEN).

       -b TYPE, --accept-type TYPE

              Accept IPv6 addresses belonging to the specified address type. Valid address  types
              are:

                * unicast
                * unspec
                * multicast

       -k SCOPE, --accept-scope SCOPE

              Accept  IPv6  addresses  belonging  to  the  specified address scope. Valid address
              scopes are:

                * reserved
                * interface (or "interface-local)
                * link (or "link-local")
                * admin (or "admin-local")
                * site (or "site-local")
                * admin (or "admin-local")
                * organization (or "organization-local")
                * global
                * unassigned
                * unspecified

       -w UNICAST_TYPE, --accept-utype UNICAST_TYPE

              Accept IPv6 addresses belonging  to  the  specified  unicast  type.  Valid  unicast
              address types are:

                * loopback
                * ipv4-compat
                * ipv4-mapped
                * link-local
                * site-local
                * unique-local
                * 6to4
                * teredo
                * global

       -g IID_TYPE, --accept-iid IID_TYPE

              Accept  unicast  IPv6  addresses  with an Interface ID of the specified type. Valid
              Interface ID types are:

                * ieee
                * isatap
                * ipv4-32
                * ipv4-64
                * ipv4-all
                * embed-port
                * embed-port-rev
                * embed-port-all
                * low-byte
                * byte-pattern
                * random

       -J PREFIX, --block PREFIX

              Block IPv6 addresses belonging to the specified IPv6 prefix (PREFIX/LEN).

       -B TYPE, --block-type TYPE

              Block IPv6 addresses belonging to the specified address type. Valid  address  types
              are:

                * unicast
                * unspec
                * multicast

       -K SCOPE, --block-scope SCOPE

              Block IPv6 addresses belonging to the specified address scope. Valid address scopes
              are:

                * reserved
                * interface (or "interface-local)
                * link (or "link-local")
                * admin (or "admin-local")
                * site (or "site-local")
                * admin (or "admin-local")
                * organization (or "organization-local")
                * global
                * unassigned
                * unspecified

       -W UNICAST_TYPE, --block-utype UNICAST_TYPE

              Block IPv6 addresses belonging to the specified unicast type. Valid unicast address
              types are:

                * loopback
                * ipv4-compat
                * ipv4-mapped
                * link-local
                * site-local
                * unique-local
                * 6to4
                * teredo
                * global

       -G IPV6_ADDRESS, --block-iid IID_TYPE

              Block  unicast  IPv6  addresses  with  an Interface ID of the specified type. Valid
              Interface ID types are:

                * ieee
                * isatap
                * ipv4-32
                * ipv4-64
                * ipv4-all
                * embed-port
                * embed-port-rev
                * embed-port-all
                * low-byte
                * byte-pattern
                * random

       -q, --print-unique

              This option causes the tool to eliminate duplicate addresses from the list of  IPv6
              addresses  read  from  standard  input  (stdin).  That  is,  when reading a list of
              addresses from stdin, only the first "copy" of each address will  be  processed  by
              the tool (with later ones being simply ignored).

       -c, --print-canonic

              This  option  request  the  tool  to  print the IPv6 address specfied with the '-a'
              option (or a list of addresses read froom stdin if the '-i' option was set) in  its
              canonic  form.  This  is useful to before comparing textual representations of IPv6
              addresses, since the same address can usually  be  written  in  multiple  different
              ways.

       -d, --print-decode

              This  option  request  the  tool  to decode the IPv6 address specfied with the '-a'
              option (or a list of addresses read froom stdin if the '-i' option  was  set).  The
              current  version  of  the  tool  supports only decode type, in which information is
              printed for each address with the following syntax:

                      AddressType=AddressSubtype=Scope=IIDType=IIDSubtype

              This simple syntax is meant to be easy for scripting purposes. Future  versions  of
              the tool will incorporate a human-friendly mode.

       -s, --print-stats

              This  option  requests the tool to produce address statistics from the list of IPv6
              addresses read from standard input. This option should be used in conjunction  with
              the '-i' option, such that multiple addresses can be given as input to addr6.

              addr6 will always print the total number of IPv6 addresses that have been examined,
              and the percentage of unicast, multicast, and unspecified  (::)  addresses.  If  at
              least  one  unicast  address  is  identified,  unicast-specific  statistics will be
              printed. In the same way, if at least one multicast  address  is  identified,  then
              multicast-specific statistics will be printed.

              Unicast-specific statistics include:

                1) Number and percentage of each unicast address type (global
                   unicast, link-local unicast, 6to4, Teredo, etc.).

                2) Number and percentage of each of the different Interface
                   ID types (IEEE-based, low-byte, etc.).

              Only  those  unicast  address  types for which there are multiple possible types of
              Interface-IDs will be considered for the Interface-ID assessment. Namely,

                * 6to4
                * Global Unicast
                * Link-local Unicast
                * Site-local unicast addresses (deprecated)
                * Unique local unicast addresses

              Unicast address types such as 'Teredo' are not considered by this  analysis,  since
              they  have  a  single  type  of  Interface-ID,  as  specified  by the corresponding
              specifications.

              Multicast-specific statistics include:

                1) Number of addresses and percentage of each multicast
                   address type (Permanent, Embedded-RP, etc).

                2) Number addresses and percentage of each of the multicast
                   address scope different Interface ID types (Link, Interfa-
                   ce, Global, etc.)

       -v, --verbose

              This  option  selects  the  "verbosity"  of  the  tool.  If  this  option  is  left
              unspecified, only minimum information is printed.

       -h, --help

              Print help information for the addr6 tool.

EXAMPLES

       The following sections illustrate typical use cases of the addr6 tool.

       Example #1

       $ cat addresslist.txt | addr6 -i -q

       addr6  will  read  IPv6  addresses from stdin ('-i' option), and will only print the first
       instance of each address ('-q' option), thus effectively removing any duplicates from  the
       list.

           Note: In this particular scenario, the address list results
           from the command 'cat addresslist.txt', that has its output
           redirected to the standard input of the addr6 tool.

       Example #2

       $ addr6 -a fc00::1

       Decode  the  IPv6  address specified with the '-a' option. Note that while the '-d' option
       was not set, this is the default  behavior  of  the  tool  (unless  overridden  y  another
       option).

       Example #3

       $ cat addresslist.txt | addr6 -i -q -s

       addr6  will  read IPv6 addresses from stdin ('-i' option), will ignore duplicate addresses
       ('-q' option), and will print statistics about the processed IPv6 addresses.

           Note: In this particular scenario, the address list results
           from the command 'cat addresslist.txt', that has its output
           redirected to the standard input of the addr6 tool.

       Example #4

       $ cat addresslist.txt | addr6 -i -q -d

       addr6 will read IPv6 addresses from stdin ('-i' option), will ignore  duplicate  addresses
       ('-q' option), and will decode each of the remaining addresses.

           Note: In this particular scenario, the address list results
           from the command 'cat addresslist.txt', that has its output
           redirected to the standard input of the addr6 tool.

       Example #5

       $ cat addresslist.txt | addr6 -i -j 2001:db8::/16

       addr6  will  read IPv6 addresses from stdin ('-i' option), will discard any addresses that
       do not belong to the prefix 2001:db8::/16 (i.e., it will "accept" addresses  belonging  to
       such prefix).

           Note: In this particular scenario, the address list results
           from the command 'cat addresslist.txt', that has its output
           redirected to the standard input of the addr6 tool.

SEE ALSO

       ipv6toolkit.conf(5)

       draft-ietf-opsec-ipv6-host-scanning                     (available                     at:
       <http://tools.ietf.org/html/draft-ietf-opsec-ipv6-host-scanning>)  for  a  discussion   of
       different IPv6 address patterns.

AUTHOR

       The  addr6  tool  and  the  corresponding  manual  pages  were  produced  by Fernando Gont
       <fgont@si6networks.com> for SI6 Networks <http://www.si6networks.com>.

COPYRIGHT

       Copyright (c) 2011-2013 Fernando Gont.

       Permission is granted to copy, distribute and/or modify this document under the  terms  of
       the GNU Free Documentation License, Version 1.3 or any later version published by the Free
       Software Foundation; with no Invariant Sections, no Front-Cover Texts, and  no  Back-Cover
       Texts.  A copy of the license is available at <http://www.gnu.org/licenses/fdl.html>.

                                                                                         ADDR6(1)