Provided by: aegis_4.24.3-3_amd64 bug

NAME

        aegis new release - create a new project from an old-style project.

SYNOPSIS

        aegis -New_ReLeaSe project-name [ new-project-name ][ option...  ]
        aegis -New_ReLeaSe -List [ option...  ]
        aegis -New_ReLeaSe -Help

DESCRIPTION

        The aegis -New_ReLeaSe command is used to create a new project from an existing project.
        It creates a new post-3.0 project from an old pre-3.0 project.

        Please Note: If your old-style project does not have a version number in the project
        name, you must supply a new project name, otherwise you will get an error.  (If you want
        to re-use the old project name, you need to rename the old project, and then use aenrls
        to create a new new-style project with the old name.  See the HOWTO for how to change a
        project's name.)

        This command was essential before the introduction of branches into the Aegis model.  It
        is more useful to create a new release of a project by ending development on the branch
        of the previous release and starting development of a new branch numbered for the desired
        release.

        Once you have a new-style project, use the aenbr(1) command to create new branches on
        this project.  This provides more efficient release management, and allows historical
        versions to be reproduced more simply.

        If no new-project-name is specified, it will be derived from the project given as
        follows: any minor version dot suffix will be removed from the name, then any major
        version dot suffix will be removed from the name.  A major version dot suffix will be
        appended, and then a minor version dot suffix will be appended.  As an example, "foo.1.0"
        would become "foo.1.1" assuming the default minor version increment, and "foo" would
        become "foo.1.1" assuming the same minor version increment.

        The entire project baseline will be copied.  The project state will be as if change 1 had
        already been integrated, naming every file (in the old project) as a new file.  The
        history files will reflect this.  No build will be necessary; it is assumed that the old
        baseline was built successfully.  Change numbers will commence at 2, as will build
        numbers.  Test numbers will commence where the old project left off (because all the
        earlier test numbers were used by the old project).

        The default is for the minor version number to be incremented.  If the major version
        number is incremented or set, the minor version number will be set to zero if it is not
        explicitly given.

        The pointer to the new project will be added to the first element of the search path, or
        /var/lib/aegis if none is set.  If this is inappropriate, use the -LIBrary option to
        explicitly set the desired location.  See the -LIBrary option for more information.

        The project directory, under which the project baseline and history and state and change
        data are kept, will be created at this time.  If the -DIRectory option is not given, the
        project directory will be created in the directory specified by the default_project_‐
        directory field of the project user's aeuconf(5), or if not set in project user's home
        directory; in either case with the same name as the project.

        All staff will be copied from the old project to the new project without change, as will
        all of the project attributes.

THE BASELINE LOCK

        The baseline lock is used to ensure that the baseline remains in a consistent state for
        the duration of commands which need to read the contents of files in the baseline.

        The commands which require the baseline to be consistent (these include the aeb(1),
        aecp(1) and aed(1) commands) take a baseline read lock.  This is a non-exclusive lock, so
        the concurrent development of changes is not hindered.

        The command which modifies the baseline, aeipass(1), takes a baseline write lock.  This
        is an exclusive lock, forcing aeipass(1) to block until there are no active baseline read
        locks.

        It is possible that one of the above development commands will block until an in-progress
        aegis -Integrate_PASS completes.  This is usually of short duration while the project
        history is updated.  The delay is essential so that these commands receive a consistent
        view of the baseline.  No other integration command will cause the above development
        commands to block.

        When aegis' branch functionality is in use, a read (non-exclusive) lock is taken on the
        branch baseline and also each of the "parent" baselines.  However, a baseline write
        (exclusive) lock is only taken on the branch baseline; the "parent" baselines are only
        read (non-exclusive) locked.

   Project Directory Location
        Please Note: Aegis also consults the underlying file system, to determine its notion of
        maximum file size.  Where the file system's maximum file size is less than
        maximum_filename_length, the filesystem wins.  This can happen, for example, when you are
        using the Linux UMSDOS file system, or when you have an NFS mounted an ancient V7
        filesystem.  Setting maximum_filename_length to 255 in these cases does not alter the
        fact that the underlying file systems limits are far smaller (12 and 14, respectively).

        If your development directories (or your whole project) is on filesystems with filename
        limitations, or a portion of the heterogeneous builds take place in such an environment,
        it helps to tell Aegis what they are (using the project config file's fields) so that you
        don't run into the situation where the project builds on the more permissive
        environments, but fails with mysterious errors in the more limited environments.

        If your development directories are routinely on a Linux UMSDOS filesystem, you would
        probably be better off setting dos_filename_required = true, and also changing the
        development_directory_template field.  Heterogeneous development with various Windows
        environments may also require this.

OPTIONS

        The following options are understood:

        -DIRectory path
                This option may be used to specify which directory is to be used.  It is an error
                if the current user does not have appropriate permissions to create the directory
                path given.  This must be an absolute path.

                Caution: If you are using an automounter do not use `pwd` to make an absolute
                path, it usually gives the wrong answer.

        -Help
                This option may be used to obtain more information about how to use the aegis
                program.

        -LIBrary abspath
                This option may be used to specify a directory to be searched for global state
                files and user state files.  (See aegstate(5) and aeustate(5) for more
                information.)  Several library options may be present on the command line, and
                are search in the order given.  Appended to this explicit search path are the
                directories specified by the AEGIS_PATH environment variable (colon separated),
                and finally, /usr/local/lib/aegis is always searched.  All paths specified,
                either on the command line or in the AEGIS_PATH environment variable, must be
                absolute.

        -List
                This option may be used to obtain a list of suitable subjects for this command.
                The list may be more general than expected.

        -Not_Logging
                This option may be used to disable the automatic logging of output and errors to
                a file.  This is often useful when several aegis commands are combined in a shell
                script.

        -TERse
                This option may be used to cause listings to produce the bare minimum of
                information.  It is usually useful for shell scripts.

        -Verbose
                This option may be used to cause aegis to produce more output.  By default aegis
                only produces output on errors.  When used with the -List option this option
                causes column headings to be added.

        -VERSion number
                This option may be used to specify the version number for the project.  Version
                number are implemented as branches.  Use the empty string as the argument if you
                want no version branches created.

        -Wait   This option may be used to require Aegis commands to wait for access locks, if
                they cannot be obtained immediately.  Defaults to the user's lock_wait_preference
                if not specified, see aeuconf(5) for more information.

        -No_Wait
                This option may be used to require Aegis commands to emit a fatal error if access
                locks cannot be obtained immediately.  Defaults to the user's
                lock_wait_preference if not specified, see aeuconf(5) for more information.

        See also aegis(1) for options common to all aegis commands.

        All options may be abbreviated; the abbreviation is documented as the upper case letters,
        all lower case letters and underscores (_) are optional.  You must use consecutive
        sequences of optional letters.

        All options are case insensitive, you may type them in upper case or lower case or a
        combination of both, case is not important.

        For example: the arguments "-project, "-PROJ" and "-p" are all interpreted to mean the
        -Project option.  The argument "-prj" will not be understood, because consecutive
        optional characters were not supplied.

        Options and other command line arguments may be mixed arbitrarily on the command line,
        after the function selectors.

        The GNU long option names are understood.  Since all option names for aegis are long,
        this means ignoring the extra leading '-'.  The "--option=value" convention is also
        understood.

RECOMMENDED ALIAS

        The recommended alias for this command is
        csh%    alias aenrls 'aegis -nrls \!* -v'
        sh$     aenrls(){aegis -nrls "$@" -v}

ERRORS

        It is an error if the old project named does not exist.

        It is an error if the old project named has not yet had any changes integrated.

        It is an error if the old project named has any changes not in the completed state.

        It is an error if the current user is not an administrator of the old project.

EXIT STATUS

        The aegis command will exit with a status of 1 on any error.  The aegis command will only
        exit with a status of 0 if there are no errors.

ENVIRONMENT VARIABLES

        See aegis(1) for a list of environment variables which may affect this command.  See
        aepconf(5) for the project configuration file's project_specific field for how to set
        environment variables for all commands executed by Aegis.

SEE ALSO

        aenpr(1)
                create a new project

        aermpr(1)
                remove project

        aeuconf(5)
                user configuration file format

COPYRIGHT

        aegis version 4.24.3.D001
        Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
        2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter Miller

        The aegis program comes with ABSOLUTELY NO WARRANTY; for details use the 'aegis -VERSion
        License' command.  This is free software and you are welcome to redistribute it under
        certain conditions; for details use the 'aegis -VERSion License' command.

AUTHOR

        Peter Miller   E-Mail:   millerp@canb.auug.org.au
        /\/\*             WWW:   http://www.canb.auug.org.au/~millerp/

        Aegis User Guide
                The chapter on Branching has useful information about releases and branching.