NAME

       git-stash - Stash the changes in a dirty working directory away

SYNOPSIS

       git stash list [<options>]
       git stash show [<stash>]
       git stash drop [-q|--quiet] [<stash>]
       git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
       git stash branch <branchname> [<stash>]
       git stash [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
                    [-u|--include-untracked] [-a|--all] [<message>]]
       git stash clear
       git stash create [<message>]
       git stash store [-m|--message <message>] [-q|--quiet] <commit>

DESCRIPTION

       Use git stash when you want to record the current state of the working directory and the
       index, but want to go back to a clean working directory. The command saves your local
       modifications away and reverts the working directory to match the HEAD commit.

       The modifications stashed away by this command can be listed with git stash list,
       inspected with git stash show, and restored (potentially on top of a different commit)
       with git stash apply. Calling git stash without any arguments is equivalent to git stash
       save. A stash is by default listed as "WIP on branchname ...", but you can give a more
       descriptive message on the command line when you create one.

       The latest stash you created is stored in refs/stash; older stashes are found in the
       reflog of this reference and can be named using the usual reflog syntax (e.g. stash@{0} is
       the most recently created stash, stash@{1} is the one before it, stash@{2.hours.ago} is
       also possible).

OPTIONS

       save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet]
       [<message>]
           Save your local modifications to a new stash, and run git reset --hard to revert them.
           The <message> part is optional and gives the description along with the stashed state.
           For quickly making a snapshot, you can omit both "save" and <message>, but giving only
           <message> does not trigger this action to prevent a misspelled subcommand from making
           an unwanted stash.

           If the --keep-index option is used, all changes already added to the index are left
           intact.

           If the --include-untracked option is used, all untracked files are also stashed and
           then cleaned up with git clean, leaving the working directory in a very clean state.
           If the --all option is used instead then the ignored files are stashed and cleaned in
           addition to the untracked files.

           With --patch, you can interactively select hunks from the diff between HEAD and the
           working tree to be stashed. The stash entry is constructed such that its index state
           is the same as the index state of your repository, and its worktree contains only the
           changes you selected interactively. The selected changes are then rolled back from
           your worktree. See the “Interactive Mode” section of git-add(1) to learn how to
           operate the --patch mode.

           The --patch option implies --keep-index. You can use --no-keep-index to override this.

       list [<options>]
           List the stashes that you currently have. Each stash is listed with its name (e.g.
           stash@{0} is the latest stash, stash@{1} is the one before, etc.), the name of the
           branch that was current when the stash was made, and a short description of the commit
           the stash was based on.

               stash@{0}: WIP on submit: 6ebd0e2... Update git-stash documentation
               stash@{1}: On master: 9cc0589... Add git-stash

           The command takes options applicable to the git log command to control what is shown
           and how. See git-log(1).

       show [<stash>]
           Show the changes recorded in the stash as a diff between the stashed state and its
           original parent. When no <stash> is given, shows the latest one. By default, the
           command shows the diffstat, but it will accept any format known to git diff (e.g., git
           stash show -p stash@{1} to view the second most recent stash in patch form). You can
           use stash.showStat and/or stash.showPatch config variables to change the default
           behavior.

       pop [--index] [-q|--quiet] [<stash>]
           Remove a single stashed state from the stash list and apply it on top of the current
           working tree state, i.e., do the inverse operation of git stash save. The working
           directory must match the index.

           Applying the state can fail with conflicts; in this case, it is not removed from the
           stash list. You need to resolve the conflicts by hand and call git stash drop manually
           afterwards.

           If the --index option is used, then tries to reinstate not only the working tree’s
           changes, but also the index’s ones. However, this can fail, when you have conflicts
           (which are stored in the index, where you therefore can no longer apply the changes as
           they were originally).

           When no <stash> is given, stash@{0} is assumed, otherwise <stash> must be a reference
           of the form stash@{<revision>}.

       apply [--index] [-q|--quiet] [<stash>]
           Like pop, but do not remove the state from the stash list. Unlike pop, <stash> may be
           any commit that looks like a commit created by stash save or stash create.

       branch <branchname> [<stash>]
           Creates and checks out a new branch named <branchname> starting from the commit at
           which the <stash> was originally created, applies the changes recorded in <stash> to
           the new working tree and index. If that succeeds, and <stash> is a reference of the
           form stash@{<revision>}, it then drops the <stash>. When no <stash> is given, applies
           the latest one.

           This is useful if the branch on which you ran git stash save has changed enough that
           git stash apply fails due to conflicts. Since the stash is applied on top of the
           commit that was HEAD at the time git stash was run, it restores the originally stashed
           state with no conflicts.

       clear
           Remove all the stashed states. Note that those states will then be subject to pruning,
           and may be impossible to recover (see Examples below for a possible strategy).

       drop [-q|--quiet] [<stash>]
           Remove a single stashed state from the stash list. When no <stash> is given, it
           removes the latest one. i.e.  stash@{0}, otherwise <stash> must be a valid stash log
           reference of the form stash@{<revision>}.

       create
           Create a stash (which is a regular commit object) and return its object name, without
           storing it anywhere in the ref namespace. This is intended to be useful for scripts.
           It is probably not the command you want to use; see "save" above.

       store
           Store a given stash created via git stash create (which is a dangling merge commit) in
           the stash ref, updating the stash reflog. This is intended to be useful for scripts.
           It is probably not the command you want to use; see "save" above.

DISCUSSION

       A stash is represented as a commit whose tree records the state of the working directory,
       and its first parent is the commit at HEAD when the stash was created. The tree of the
       second parent records the state of the index when the stash is made, and it is made a
       child of the HEAD commit. The ancestry graph looks like this:

                  .----W
                 /    /
           -----H----I

       where H is the HEAD commit, I is a commit that records the state of the index, and W is a
       commit that records the state of the working tree.

EXAMPLES

       Pulling into a dirty tree
           When you are in the middle of something, you learn that there are upstream changes
           that are possibly relevant to what you are doing. When your local changes do not
           conflict with the changes in the upstream, a simple git pull will let you move
           forward.

           However, there are cases in which your local changes do conflict with the upstream
           changes, and git pull refuses to overwrite your changes. In such a case, you can stash
           your changes away, perform a pull, and then unstash, like this:

               $ git pull
                ...
               file foobar not up to date, cannot merge.
               $ git stash
               $ git pull
               $ git stash pop

       Interrupted workflow
           When you are in the middle of something, your boss comes in and demands that you fix
           something immediately. Traditionally, you would make a commit to a temporary branch to
           store your changes away, and return to your original branch to make the emergency fix,
           like this:

               # ... hack hack hack ...
               $ git checkout -b my_wip
               $ git commit -a -m "WIP"
               $ git checkout master
               $ edit emergency fix
               $ git commit -a -m "Fix in a hurry"
               $ git checkout my_wip
               $ git reset --soft HEAD^
               # ... continue hacking ...

           You can use git stash to simplify the above, like this:

               # ... hack hack hack ...
               $ git stash
               $ edit emergency fix
               $ git commit -a -m "Fix in a hurry"
               $ git stash pop
               # ... continue hacking ...

       Testing partial commits
           You can use git stash save --keep-index when you want to make two or more commits out
           of the changes in the work tree, and you want to test each change before committing:

               # ... hack hack hack ...
               $ git add --patch foo            # add just first part to the index
               $ git stash save --keep-index    # save all other changes to the stash
               $ edit/build/test first part
               $ git commit -m 'First part'     # commit fully tested change
               $ git stash pop                  # prepare to work on all other changes
               # ... repeat above five steps until one commit remains ...
               $ edit/build/test remaining parts
               $ git commit foo -m 'Remaining parts'

       Recovering stashes that were cleared/dropped erroneously
           If you mistakenly drop or clear stashes, they cannot be recovered through the normal
           safety mechanisms. However, you can try the following incantation to get a list of
           stashes that are still in your repository, but not reachable any more:

               git fsck --unreachable |
               grep commit | cut -d\  -f3 |
               xargs git log --merges --no-walk --grep=WIP

SEE ALSO

       git-checkout(1), git-commit(1), git-reflog(1), git-reset(1)

GIT

       Part of the git(1) suite