Provided by: mpage_2.5.6+dfsg-1_amd64 
NAME
mpage - print multiple pages per sheet on PostScript printer
SYNOPSIS
mpage [-1248aAceEfHloOrRStTuUvVxX] [-b papersize] [-B[num[lrtb]]...] [-C [encoding]] [-da|p]
[-D dateformat] [-F fontname] [-h header] [-j first[-last][%interval]] [-J startpageno] [-L lines]
[-m[num[lrtb]]...] [-M[num[lrtb]]...] [-p[prprog]] [-P[printer]] [-s tabstop] [-W width] [-z printcmd]
[-Z printcmd_args] [file ...]
DESCRIPTION
mpage reads plain text files or PostScript documents and prints them on a PostScript printer with the
text reduced in size so that several pages appear on one sheet of paper. This is useful for viewing
large printouts on a small amount of paper. It uses ISO 8859.1 to print 8-bit characters.
The following options are recognized (note that arguments to options may be separated from the option by
spaces, except for -B, -m, -M, -p and -P): Also when mpage encounters -- as option it will stop parsing
arguments and the remaining arguments are interpreted as filenames.
-1 Print 1 normal page per sheet (included for symmetry).
-2 Print 2 normal pages per sheet.
-4 Print 4 normal pages per sheet (default).
-8 Print 8 normal pages per sheet.
-a Toggle layout of the pages on the sheet so that successively numbered pages run down the sheet, as
opposed to left to right. (default updown).
-A This option is deprecated, use -bA4 instead.
-bpapersize
Prepare output for the selected paper type. Papersize can be A3 for European A3, A4 for European
A4, Letter for US Letter, or Legal for Legal sized paper. For available types, see option -bl.
For the default, see 'mpage -x'. This default is taken from the system; see papersize(5). If it
isn't found, mpage exits with an error.
-bl, -b?
List the currently available paper types, then exit.
-B[<num>[lrtb]*]
Setup a box around a particular part of your page. Specify text box margins and line thickness.
The default is 0 columns (lines) for both left and right (top and bottom) margins and 0 line
thickness. Specifying -B solely toggles printing of the box. l, r, t or b set the left, right,
top or bottom margin respectively to <num> columns (lines). Not specifying any of the sides, will
set the line thickness when <num> is given. For example -B1 sets the line thickness to 1. Sides
with negative margins will not print.
-c Toggle concatenation of pages from different files on single sheets (default off).
-C[encodingfile]
Specify the character encoding file. The file should be in the mpage library directory
(/usr/lib/mpage). Mpage has an internal default encoding based on Latin-1 or IBM codepage 850.
Depending on compile time option this encoding definition is on or not. Not specifying an
encodingfile will toggle the usage of the internal encoding.
-da|p Force input to be taken as ascii (a) or postscript (p) text. This way you can print your
postscript code as text, or print postscript code that mpage does not recognise. When using -dp,
make sure that the the postscript code contains %Page page separators or else things will probably
look odd.
-Ddateformat
Set the date format as in strftime(3) to be used in date/time representations (e.g. in headers).
(Note: to make this useful you probably need the -H option.)
-e Print 2 normal pages per sheet in duplex mode: every first and fourth page on one side and every
second and third on the other side. This is more or less a combination of the -O and -E options
but in one pass.
-E Print 2 normal pages per sheet, namely: print only the second and third page of every set of four
pages. See also -O. These options override -a and -l. Using these options double sided prints can
be created without a duplex printer.
-f Toggles folding lines longer than page width (default off).
-Ffontname
Specify font. (default Courier). Check your printer for supported fonts. Note: this has almost
nothing to do with the fonts used for your X-windows/KDE/Gnome environment.
-hheader
This is used only when the -p or -H switch is used and is passed as the "-h header" option to
pr(1) or as the header for -H.
-H Create header line for each logical page separated from page text by a horizontal line. Unless -h
is given, the header consists of last file modification time, filename and page number, all in
bold and slightly larger font. This option only applies to non-postscript files.
-Iindent
Indent text by indent characters.
-jfirst[-last][%interval]
Print just the selected sheets, specified by a number, starting at 1. Here last defaults to the
end of data, interval to 1. Several -j options can be given (up to MAXJARGS, default 100) to
create a complex selection of pages. Thus -j1-10 selects the first 10 sheets, while -j 1%2 prints
just the odd-numbered sheets and -j 2%2 prints just the even ones.
You can do double-sided printing, in two passes, as follows. If you use 3-hole punched paper, put
it in the printer such that the holes will appear at the top of the page -- on the right as you
pull out the printer tray, in our Laser writer II NTX. Print the odd-numbered sheets with
mpage ... -j 1%2 ...
Note the number of pages it reports. (Only half this many will really be printed). When printing
finishes, if mpage reported an odd number of pages, remove the last one from the stack, since
there will be no even-numbered sheet to match it. Then arrange the stack of paper for printing on
the other side. (If it's punched, the holes will now be on the left.) On our II NTX, the paper
comes out blank-side up; replace it in the tray still blank-side up but rotated 180 degrees. For
other printers, you figure it out. Now print the even-numbered sheets in reverse order with
mpage ... -r -j 2%2 ...
hoping no one else reaches the printer before you do.
-Jstartpageno
Set the start value of the sheet page count to startpageno instead of 1.
-k When mpage finds a %%Trailer or %%PSTrailer in the postscript input file it normally assumes this
is the end of the postscript file and stops reading the input file. But when the PS file includes
EPS files, %%Trailers might be anywhere. Using this option ignores the %%Trailer and %%PSTrailer
lines.
-l Toggle printing landscape or portrait mode (default portrait). Landscape pages are 55 lines long
by 132 characters wide by default. Portrait pages are 66 lines long by 80 characters wide by
default.
-Llines
Adjust the page reduction parameters so that lines lines will fit in the space of one page. This
overrides the default values normally supplied. (See -l.) If used in conjunction with -p then
this value is passed to the pr(1) as well. As a side effect this changes the font size as well
(as will the -W option.) So while there is an option to change font family, there is no explicit
option to change font size!
-m[<num>[lrtb]*]
Specify sheet margin. The default margin is 20 points. Only specifying -m sets left margin to 40
points. l, r, t or b set left, right, top or bottom margin respectively to <num> points. Not
specifying any of the sides will set all sides when <num> is given. <num> defaults to 40 points.
For example -m10 sets all margins to 10 points. -ml50tb sets left margin to default 40 and top
and bottom margins to 50 points. -m50l25bt30r sets bottom and top margin to 25, left margin to 50
and right margin to 30 points. Margins can have negative numbers.
-M[<num>[lrtb]*]
Specify logical page margins. For syntax, see -m option. Defaults are 4 for -M solely, and 8 for
<num>. Margins can be negative. This way large white borders in your (postscript) documents can
be reduced.
-o Toggle printing of outlines around each reduced page (default on).
-O Print 2 normal pages per sheet, namely: print only the first and fourth page of every set of four
pages. See also -E. These options override -a and -l. Using these options double sided prints can
be created without a duplex printer.
-p[prprog]
Pipe input through prprog command (including specified options) before printing (assumes the input
is a text file). When no command is specified, it defaults to pr(1).
-P[printer]
Specify the printer to which the PostScript output is sent (e.g. lpr -Pprinter). Using -P with no
printer specified sends the PostScript to the default printer queue (e.g. lpr). Using -P- returns
output to stdout, useful in combination with the MPAGE environment variable. Without -P output is
sent to standard output.
-r Reverse printing. The last sheet is printed first. The way of arranging reduced pages on the
sheets doesn't change.
-R Switch to left to right mode, starting first page on left bottom corner. This might be useful for
landscape postscript files. (Note: using -l after -R undoes -R, and switches to normal landscape
mode.)
-stabstop
Set tabstop width (default 8 characters). Should be >= 2.
-S Accept non-square page reduction. By default, pages are shrunk equally in X and Y, even if this
wastes some space on the sheet. With -S, reduced pages are larger but slightly distorted. (Only
used when printing postscript files.)
-t Toggle printing on both sides of the paper. This option has 3 states: nop, yes, no, which mean:
NOP: don't do anything in PostScript, use the printer default;
YES: force printer to do duplex;
NO: force printer not to do it.
If there is no -t, then the duplex is NOP. If you put some -t on the command line, the state
toggles as "yes,no,yes,no...". So, if your printer is set to print, by default, in duplex mode,
you will use "-t -t" on the command line to force it to print in non-duplex mode. Use this option
only if your printer is capable of printing in duplex mode. (default NOP).
-T Toggle tumble of every second pages. This option has 3 states: nop, yes, no (with behaviour
similar to -t). So, if your printer is set to print, by default, in duplex mode, with tumble on,
you will use "-T -T" on command line to print in nontumble mode. Use this option only if your
printer is capable of printing in duplex mode. With this version of mpage, you may use this
option even if you do not use -t. (default NOP).
-u Toggle checking for UTF-8 input (not relevant for postscript input).
-U This option is deprecated, use -bLetter instead.
-v Toggle printing a count of the number of sheets produced for printing (default off).
-V Print version information and exit.
-Wwidth
Adjust the page reduction parameters so that a line width characters long will fit in the space of
one page. This overrides the default values normally supplied. (See -l.) If used in conjunction
with -p then this value is passed to the pr(1) program as well. See also the -L option on font
sizes.
-x Print usage information (including current defaults), then exit.
-X[header]
Print header on the left and the page number on the right of each physical page (sheet). If no
header is given, the default is the current filename (note influence of -c), the filename of the
first file on the page is used.
-zprintcommand
Specify command to use to send output to. Default is lpr(1) for BSD style spooler, lp(1) for SYSV
style spooler. You can specify command line options, but note -Z. For example -zlp for system V
Unix.
-Zprintprog_queuename_arg
Specify what option to use for the "-z printcommand" to specify a printqueue. For example -zlp
-Z-d for system V Unix. Default is -P for BSD style spooler, -d for SYSV style spooler.
ENVIRONMENT
mpage examines the PRINTER (or LPDEST for SYSV style spooler) environment variable to override its
default printer.
The MPAGE_LIB environment variable can be used to control where the character encoding files (-C) can be
found.
mpage also examines the MPAGE environment variable for default option settings. Any option or
combination of options can be specified in the MPAGE environment variable. For example, if MPAGE is set
to the string:
-2oPqms -L60
it would (in the absence of other command line arguments) print 2 pages per sheet, 60 lines per page,
with outlines, on the printer named qms (overriding the PRINTER/LPDEST environment variable, if it
exists). In the environment variable, white space is used as an option delimiter, and no quoting is
recognized.
Any command line options will override both the PRINTER and MPAGE environment variables.
FILES
/tmp/mpageXXXXXX
/usr/lib/mpage
BUGS
Suffers under the burden of far too many switches. (But you wanted the choices!)
NULL characters in a postscript input file will cause mpage to crash!
Many others, we're sure.
Mpage is year 2000 compliant, as long as the underlying operating system is!!!
VERSION
Version 2.5.6, Released January 2008.
Location:
http://www.mesa.nl/pub/mpage
ftp://ftp.mesa.nl/pub/mpage
AUTHORS
Marcel Mol <marcel@mesa.nl> (current maintainer). Mark P. Hahn (Original author) 2008/01/14 MPAGE(1)