Provided by: procmail_3.22-25ubuntu0.16.04.1_amd64 bug

NAME

       procmail - autonomous mail processor

SYNOPSIS

       procmail [-ptoY] [-f fromwhom]
            [parameter=value | rcfile] ...
       procmail [-toY] [-f fromwhom] [-a argument] ...
            -d recipient ...
       procmail [-ptY] -m [parameter=value] ...  rcfile
            [argument] ...
       procmail -v

DESCRIPTION

       For a quick start, see NOTES at the end.

       Procmail  should be invoked automatically over the .forward file mechanism as soon as mail
       arrives.  Alternatively, when installed by a system administrator, it can be invoked  from
       within  the mailer immediately.  When invoked, it first sets some environment variables to
       default values, reads the mail message from stdin until an EOF, separates  the  body  from
       the  header,  and  then, if no command line arguments are present, it starts to look for a
       file named $HOME/.procmailrc.  According to the processing recipes in this file, the  mail
       message that just arrived gets distributed into the right folder (and more).  If no rcfile
       is found, or processing of the rcfile falls off the end, procmail will store the  mail  in
       the default system mailbox.

       If  no  rcfiles and no -p have been specified on the command line, procmail will, prior to
       reading $HOME/.procmailrc, interpret commands from  /etc/procmailrc  (if  present).   Care
       must  be taken when creating /etc/procmailrc, because, if circumstances permit, it will be
       executed with root privileges (contrary to the $HOME/.procmailrc file of course).

       If running suid root or with root privileges, procmail  will  be  able  to  perform  as  a
       functionally enhanced, backwards compatible mail delivery agent.

       Procmail  can  also  be  used as a general purpose mail filter, i.e., provisions have been
       made to enable procmail to be invoked in a special sendmail rule.

       The rcfile format is described in detail in the procmailrc(5) man page.

       The weighted scoring technique is described in detail in the procmailsc(5) man page.

       Examples for rcfile recipes can be looked up in the procmailex(5) man page.

   Signals
       TERMINATE   Terminate prematurely and requeue the mail.

       HANGUP      Terminate prematurely and bounce the mail.

       INTERRUPT   Terminate prematurely and bounce the mail.

       QUIT        Terminate prematurely and silently lose the mail.

       ALARM       Force a timeout (see TIMEOUT).

       USR1        Equivalent to a VERBOSE=off.

       USR2        Equivalent to a VERBOSE=on.

OPTIONS

       -v   Procmail will print its version number, display its compile  time  configuration  and
            exit.

       -p   Preserve any old environment.  Normally procmail clears the environment upon startup,
            except for the value of TZ.  However, in any case: any default values  will  override
            any  preexisting  environment variables, i.e., procmail will not pay any attention to
            any predefined environment variables, it will happily overwrite  them  with  its  own
            defaults.   For  the  list of environment variables that procmail will preset see the
            procmailrc(5) man page.  If both  -p  and  -m  are  specified,  the  list  of  preset
            environment variables shrinks to just: LOGNAME, HOME, SHELL, ORGMAIL and MAILDIR.

       -t   Make  procmail  fail  softly, i.e., if procmail cannot deliver the mail to any of the
            destinations you gave, the mail will not bounce, but will return  to  the  mailqueue.
            Another delivery-attempt will be made at some time in the future.

       -f fromwhom
            Causes  procmail  to  regenerate the leading `From ' line with fromwhom as the sender
            (instead of -f one could use the alternate and obsolete -r).   If  fromwhom  consists
            merely  of  a single `-', then procmail will only update the timestamp on the `From '
            line (if present, if not, it will generate a new one).

       -o   Instead of allowing anyone to generate `From ' lines, simply override the fakes.

       -Y   Assume traditional Berkeley mailbox format, ignore any Content-Length: fields.

       -a argument
            This will set $1 to be equal to argument.  Each succeeding -a argument will  set  the
            next number variable ($2, $3, etc).  It can be used to pass meta information along to
            procmail.  This is typically done by passing  along  the  $@x  information  from  the
            sendmail mailer rule.

       -d recipient ...
            This  turns  on explicit delivery mode, delivery will be to the local user recipient.
            This, of course, only is possible if procmail has root privileges (or if procmail  is
            already  running  with  the  recipient's euid and egid).  Procmail will setuid to the
            intended recipients and delivers the mail as if it were invoked by the recipient with
            no  arguments  (i.e.,  if  no rcfile is found, delivery is like ordinary mail).  This
            option is incompatible with -p.

       -m   Turns procmail into a general purpose mail filter.  In this mode one rcfile  must  be
            specified  on  the command line.  After the rcfile, procmail will accept an unlimited
            number  of  arguments.   If  the  rcfile  is   an   absolute   path   starting   with
            /etc/procmailrcs/  without  backward  references (i.e. the parent directory cannot be
            mentioned) procmail will, only if no security  violations  are  found,  take  on  the
            identity  of  the owner of the rcfile (or symbolic link).  For some advanced usage of
            this option you should look in the EXAMPLES section below.

ARGUMENTS

       Any arguments containing an '=' are considered to  be  environment  variable  assignments,
       they  will  all  be  evaluated  after the default values have been assigned and before the
       first rcfile is opened.

       Any other arguments are presumed to be rcfile paths (either absolute,  or  if  they  start
       with `./' relative to the current directory; any other relative path is relative to $HOME,
       unless the -m option has been given, in which case all relative paths are relative to  the
       current  directory);  procmail will start with the first one it finds on the command line.
       The following ones will only be parsed if the preceding ones have  a  not  matching  HOST-
       directive entry, or in case they should not exist.

       If  no  rcfiles  are  specified,  it looks for $HOME/.procmailrc.  If not even that can be
       found, processing will continue according to  the  default  settings  of  the  environment
       variables and the ones specified on the command line.

EXAMPLES

       Examples  for  rcfile  recipes  can  be  looked up in the procmailex(5) man page.  A small
       sample rcfile can be found in the NOTES section below.

       Skip the rest of this EXAMPLES section unless  you  are  a  system  administrator  who  is
       vaguely familiar with sendmail.cf syntax.

       The  -m  option  is  typically  used  when  procmail  is  called from within a rule in the
       sendmail.cf file.  In order to be able to do this it is  convenient  to  create  an  extra
       `procmail'  mailer  in  your  sendmail.cf file (in addition to the perhaps already present
       `local' mailer that starts up procmail).  To create such a `procmail' mailer  I'd  suggest
       something like:

              Mprocmail, P=/usr/bin/procmail, F=mSDFMhun, S=11, R=21,
                      A=procmail -m $h $g $u

       This enables you to use rules like the following (most likely in ruleset 0) to filter mail
       through the procmail mailer (please note the leading tab to continue the rule, and the tab
       to separate the comments):

              R$*<@some.where>$*
                      $#procmail $@/etc/procmailrcs/some.rc $:$1@some.where.procmail$2
              R$*<@$*.procmail>$*
                      $1<@$2>$3       Already filtered, map back

       And /etc/procmailrcs/some.rc could be as simple as:

              SENDER = "<$1>"                 # fix for empty sender addresses
              SHIFT = 1                       # remove it from $@

              :0                              # sink all junk mail
              * ^Subject:.*junk
              /dev/null

              :0 w                            # pass along all other mail
              ! -oi -f "$SENDER" "$@"

       Do  watch out when sending mail from within the /etc/procmailrcs/some.rc file, if you send
       mail to addresses which match the first rule again, you could be creating an endless  mail
       loop.

FILES

       /etc/passwd            to set the recipient's LOGNAME, HOME and SHELL variable defaults

       /var/mail/$LOGNAME     system mailbox; both the system mailbox and the immediate directory
                              it is in will be created every time procmail starts and either  one
                              is not present

       /etc/procmailrc        initial global rcfile

       /etc/procmailrcs/      special privileges path for rcfiles

       $HOME/.procmailrc      default rcfile

       /var/mail/$LOGNAME.lock
                              lockfile   for  the  system  mailbox  (not  automatically  used  by
                              procmail, unless $DEFAULT equals /var/mail/$LOGNAME and procmail is
                              delivering to $DEFAULT)

       /usr/sbin/sendmail     default mail forwarder

       _????`hostname`        temporary `unique' zero-length files created by procmail

SEE ALSO

       procmailrc(5), procmailsc(5), procmailex(5), sh(1), csh(1), mail(1), mailx(1), uucp(1),
       aliases(5), sendmail(8), egrep(1), grep(1), biff(1), comsat(8), lockfile(1), formail(1),
       cron(1)

DIAGNOSTICS

       Autoforwarding mailbox found
                              The  system  mailbox  had  its  suid  or  sgid  bit  set,  procmail
                              terminates with EX_NOUSER assuming that this mailbox  must  not  be
                              delivered to.

       Bad substitution of "x"
                              Not a valid environment variable name specified.

       Closing brace unexpected
                              There was no corresponding opening brace (nesting block).

       Conflicting options    Not all option combinations are useful

       Conflicting x suppressed
                              Flag x is not compatible with some other flag on this recipe.

       Couldn't create "x"    The system mailbox was missing and could not/will not be created.

       Couldn't create maildir part "x"
                              The   maildir   folder   "x"   is  missing  one  or  more  required
                              subdirectories and procmail could not create them.

       Couldn't create or rename temp file "x"
                              An error occurred in the mechanics of  delivering to the  directory
                              folder "x".

       Couldn't determine implicit lockfile from "x"
                              There were no `>>' redirectors to be found, using simply `$LOCKEXT'
                              as locallockfile.

       Couldn't read "x"      Procmail was unable to open an rcfile or it was not a regular file,
                              or  procmail  couldn't  open  an  MH  directory to find the highest
                              numbered file.

       Couldn't unlock "x"    Lockfile was already gone, or write  permission  to  the  directory
                              where the lockfile is has been denied.

       Deadlock attempted on "x"
                              The  locallockfile  specified  on  this  recipe is equal to a still
                              active $LOCKFILE.

       Denying special privileges for "x"
                              Procmail will not take on the identity that comes with  the  rcfile
                              because  a  security  violation  was  found  (e.g.   -p or variable
                              assignments on the  command  line)  or  procmail  had  insufficient
                              privileges to do so.

       Descriptor "x" was not open
                              As  procmail was started, stdin, stdout or stderr was not connected
                              (possibly an attempt to subvert security)

       Enforcing stricter permissions on "x"
                              The system mailbox of the recipient  was  found  to  be  unsecured,
                              procmail secured it.

       Error while writing to "x"
                              Nonexistent  subdirectory,  no  write permission, pipe died or disk
                              full.

       Exceeded LINEBUF       Buffer overflow detected, LINEBUF was too small,  PROCMAIL_OVERFLOW
                              has been set.

       MAILDIR is not an absolute path

       MAILDIR path too long

       ORGMAIL is not an absolute path

       ORGMAIL path too long

       default rcfile is not an absolute path

       default rcfile path too long
                              The  specified  item's  full  path,  when expanded, was longer than
                              LINEBUF or didn't start with a file separator.

       Excessive output quenched from "x"
                              The program or filter "x" tried to produce too much output for  the
                              current  LINEBUF,  the rest was discarded and PROCMAIL_OVERFLOW has
                              been set.

       Extraneous x ignored   The action line  or  other  flags  on  this  recipe  makes  flag  x
                              meaningless.

       Failed forking "x"     Process table is full (and NORESRETRY has been exhausted).

       Failed to execute "x"  Program not in path, or not executable.

       Forced unlock denied on "x"
                              No write permission in the directory where lockfile "x" resides, or
                              more than one procmail trying to force a lock at exactly  the  same
                              time.

       Forcing lock on "x"    Lockfile  "x"  is going to be removed by force because of a timeout
                              (see also: LOCKTIMEOUT).

       Incomplete recipe      The start of a recipe was found, but it stranded in an EOF.

       Insufficient privileges
                              Procmail either needs root  privileges,  or  must  have  the  right
                              (e)uid and (e)gid to run in delivery mode.  The mail will bounce.

       Invalid regexp "x"     The  regular  expression  "x"  contains  errors  (most  likely some
                              missing or extraneous parens).

       Kernel-lock failed     While trying to use the kernel-supported locking calls, one of them
                              failed (usually indicates an OS error), procmail ignores this error
                              and proceeds.

       Kernel-unlock failed   See above.

       Lock failure on "x"    Can only occur  if  you  specify  some  real  weird  (and  illegal)
                              lockfilenames  or  if  the lockfile could not be created because of
                              insufficient permissions or nonexistent subdirectories.

       Lost "x"               Procmail tried to clone itself but could not find back  rcfile  "x"
                              (it  either  got  removed or it was a relative path and you changed
                              directory since procmail opened it last time).

       Missing action         The current recipe was found to be incomplete.

       Missing closing brace  A nesting block was started, but never finished.

       Missing name           The -f option needs an extra argument.

       Missing argument       You specified the -a option but forgot the argument.

       Missing rcfile         You specified the -m option, procmail expects the name of an rcfile
                              as argument.

       Missing recipient      You  specified  the  -d option or called procmail under a different
                              name, it expects one or more recipients as arguments.

       No space left to finish writing "x"
                              The filesystem containing "x" does not have enough  free  space  to
                              permit delivery of the message to the file.

       Out of memory          The   system  is  out  of  swap  space  (and  NORESRETRY  has  been
                              exhausted).

       Processing continued   The  unrecognised  options  on  the  command  line   are   ignored,
                              proceeding as usual.

       Program failure (nnn) of "x"
                              Program  that  was  started  by  procmail  returned  nnn instead of
                              EXIT_SUCCESS (=0); if nnn is negative, then this is the signal  the
                              program died on.

       Quota exceeded while writing "x"
                              The  filesize  quota for the recipient on the filesystem containing
                              "x" does not permit delivering the message to the file.

       Renaming bogus "x" into "x"
                              The system mailbox of the recipient was found to be bogus, procmail
                              performed evasive actions.

       Rescue of unfiltered data succeeded/failed
                              A  filter  returned  unsuccessfully, procmail tried to get back the
                              original text.

       Skipped: "x"           Couldn't do  anything  with  "x"  in  the  rcfile  (syntax  error),
                              ignoring it.

       Suspicious rcfile "x"  The owner of the rcfile was not the recipient or root, the file was
                              world writable, or  the  directory  that  contained  it  was  world
                              writable,  or  this  was the default rcfile ($HOME/.procmailrc) and
                              either it was group writable or the directory that contained it was
                              group writable (the rcfile was not used).

       Terminating prematurely whilst waiting for ...
                              Procmail received a signal while it was waiting for ...

       Timeout, terminating "x"
                              Timeout has occurred on program or filter "x".

       Timeout, was waiting for "x"
                              Timeout  has  occurred on program, filter or file "x".  If it was a
                              program or filter, then it didn't seem to be running anymore.

       Truncated file to former size
                              The file could not be delivered to successfully, so  the  file  was
                              truncated to its former size.

       Truncating "x" and retrying lock
                              "x" does not seem to be a valid filename or the file is not empty.

       Unable to treat as directory "x"
                              Either  the suffix on "x" would indicate that it should be an MH or
                              maildir folder, or it was listed as an second folder into which  to
                              link, but it already exists and is not a directory.

       Unexpected EOL         Missing closing quote, or trying to escape EOF.

       Unknown user "x"       The specified recipient does not have a corresponding uid.

EXTENDED DIAGNOSTICS

       Extended diagnostics can be turned on and off through setting the VERBOSE variable.

       [pid] time & date      Procmail's pid and a timestamp.  Generated whenever procmail logs a
                              diagnostic and at  least  a  second  has  elapsed  since  the  last
                              timestamp.

       Acquiring kernel-lock  Procmail  now  tries  to  kernel-lock the most recently opened file
                              (descriptor).

       Assigning "x"          Environment variable assignment.

       Assuming identity of the recipient, VERBOSE=off
                              Dropping all privileges (if any),  implicitly  turns  off  extended
                              diagnostics.

       Bypassed locking "x"   The  mail spool directory was not accessible to procmail, it relied
                              solely on kernel locks.

       Executing "x"          Starting program "x".   If  it  is  started  by  procmail  directly
                              (without  an  intermediate  shell),  procmail  will  show  where it
                              separated the arguments by inserting commas.

       HOST mismatched "x"    This host was called "x", HOST contained something else.

       Locking "x"            Creating lockfile "x".

       Linking to "x"         Creating a hardlink between directory folders.

       Match on "x"           Condition matched.

       Matched "x"            Assigned "x" to MATCH.

       No match on "x"        Condition didn't match, recipe skipped.

       Non-zero exitcode (nnn) by "x"
                              Program that was started by procmail  as  a  condition  or  as  the
                              action  of  a  recipe  with  the  `W'  flag returned nnn instead of
                              EXIT_SUCCESS (=0); the usage indicates that this is not an entirely
                              unexpected condition.

       Notified comsat: "$LOGNAME@offset:file"
                              Sent  comsat/biff  a  notice that mail arrived for user $LOGNAME at
                              `offset' in `file'.

       Opening "x"            Opening file "x" for appending.

       Rcfile: "x"            Rcfile changed to "x".

       Reiterating kernel-lock
                              While attempting several locking  methods,  one  of  these  failed.
                              Procmail will reiterate until they all succeed in rapid succession.

       Score: added newtotal "x"
                              This   condition   scored  `added'  points,  which  resulted  in  a
                              `newtotal' score.

       Unlocking "x"          Removing lockfile "x" again.

WARNINGS

       You should create a shell script that uses lockfile(1) before invoking your mail shell  on
       any mailbox file other than the system mailbox (unless of course, your mail shell uses the
       same lockfiles (local or global) you specified in your rcfile).

       In the unlikely event that you absolutely need to kill procmail before  it  has  finished,
       first  try and use the regular kill command (i.e., not kill -9, see the subsection Signals
       for suggestions), otherwise some lockfiles might not get removed.

       Beware when using the -t option, if procmail repeatedly is  unable  to  deliver  the  mail
       (e.g.,  due  to  an  incorrect  rcfile),  the  system mailqueue could fill up.  This could
       aggravate both the local postmaster and other users.

       The /etc/procmailrc file might be executed with root privileges, so  be  very  careful  of
       what  you put in it.  SHELL will be equal to that of the current recipient, so if procmail
       has to invoke the shell, you'd better set  it  to  some  safe  value  first.   See  also :
       DROPPRIVS.

       Keep in mind that if chown(1) is permitted on files in /etc/procmailrcs/, that they can be
       chowned to root (or anyone else) by their current owners.  For maximum security, make sure
       this directory is executable to root only.

       Procmail is not the proper tool for sharing one mailbox among many users, such as when you
       have one POP account for all mail to your  domain.  It  can  be  done  if  you  manage  to
       configure  your  MTA to add some headers with the envelope recipient data in order to tell
       Procmail who a message is for, but this is usually not the right thing to do.  Perhaps you
       want to investigate if your MTA offers `virtual user tables', or check out the `multidrop'
       facility of Fetchmail.

BUGS

       After removing a lockfile by force, procmail waits $SUSPEND seconds before creating a  new
       lockfile so that another process that decides to remove the stale lockfile will not remove
       the newly created lock by mistake.

       Procmail uses the regular TERMINATE signal to terminate any runaway filter,  but  it  does
       not check if the filter responds to that signal and it only sends it to the filter itself,
       not to any of the filter's children.

       A continued Content-Length: field is not handled correctly.

       The embedded newlines in a continued header should be skipped  when  matching  instead  of
       being treated as a single space as they are now.

MISCELLANEOUS

       If  there is an existing Content-Length: field in the header of the mail and the -Y option
       is not specified, procmail will trim the field to report the correct size.  Procmail  does
       not change the fieldwidth.

       If  there  is  no  Content-Length:  field or the -Y option has been specified and procmail
       appends to regular mailfolders, any lines in the  body  of  the  message  that  look  like
       postmarks are prepended with `>' (disarms bogus mailheaders).  The regular expression that
       is used to search for these postmarks is:
              `\nFrom '

       If the destination name used in explicit delivery mode is  not  in  /etc/passwd,  procmail
       will  proceed as if explicit delivery mode was not in effect.  If not in explicit delivery
       mode and should the uid procmail is  running  under,  have  no  corresponding  /etc/passwd
       entry,  then  HOME  will default to /, LOGNAME will default to #uid, SHELL will default to
       /bin/sh, and ORGMAIL will default to /tmp/dead.letter.

       When in explicit delivery mode, procmail will generate a leading `From ' line if  none  is
       present.   If  one  is  already present procmail will leave it intact.  If procmail is not
       invoked with one of the following user or group ids :  root,  daemon,  uucp,  mail,  x400,
       network,  list,  slist,  lists  or news, but still has to generate or accept a new `From '
       line, it will generate an additional `>From ' line to help distinguish fake mails.

       For security reasons procmail will only use an absolute or $HOME-relative rcfile if it  is
       owned  by  the recipient or root, not world writable, and the directory it is contained in
       is not world writable.  The $HOME/.procmailrc file has the additional  constraint  of  not
       being group-writable or in a group-writable directory.

       If  /var/mail/$LOGNAME  is  a  bogus  mailbox  (i.e., does not belong to the recipient, is
       unwritable, is a symbolic link or is a hard link),  procmail  will  upon  startup  try  to
       rename  it  into  a  file starting with `BOGUS.$LOGNAME.' and ending in an inode-sequence-
       code.  If this turns out to be impossible, ORGMAIL will have no initial value,  and  hence
       will inhibit delivery without a proper rcfile.

       If /var/mail/$LOGNAME already is a valid mailbox, but has got too loose permissions on it,
       procmail will correct this.  To prevent procmail from doing this make sure the u+x bit  is
       set.

       When  delivering  to  directories,  MH  folders, or maildir folders, you don't need to use
       lockfiles to prevent several concurrently running procmail programs from messing up.

       Delivering to MH folders is  slightly  more  time  consuming  than  delivering  to  normal
       directories  or  mailboxes,  because  procmail has to search for the next available number
       (instead of having the filename immediately available).

       On general failure procmail will return EX_CANTCREAT, unless option -t  is  specified,  in
       which case it will return EX_TEMPFAIL.

       To make `egrepping' of headers more consistent, procmail concatenates all continued header
       fields; but only internally.  When delivering the mail, line breaks will appear as before.

       If procmail is called under a name not starting with `procmail' (e.g., if it is linked  to
       another  name and invoked as such), it comes up in explicit delivery mode, and expects the
       recipients' names as command line arguments (as if -d had been specified).

       Comsat/biff notifications are done using udp.   They  are  sent  off  once  when  procmail
       generates  the  regular  logfile  entry.   The  notification  messages  have the following
       extended format (or as close as you can get when final delivery was not to a file):
              $LOGNAME@offset_of_message_in_mailbox:absolute_path_to_mailbox

       Whenever procmail itself opens a file to deliver to, it consistently  uses  the  following
       kernel locking strategies: fcntl(2).

       Procmail is NFS-resistant and eight-bit clean.

NOTES

       Calling up procmail with the -h or -? options will cause it to display a command-line help
       and recipe flag quick-reference page.

       There exists an excellent newbie FAQ about mailfilters (and procmail in particular); it is
       maintained by Nancy McGough <nancym@ii.com> and can be obtained by sending a mail to mail-
       server@rtfm.mit.edu with the following in the body:
              send usenet/news.answers/mail/filtering-faq

       If procmail is not installed globally as the default mail delivery agent (ask your  system
       administrator),  you have to make sure it is invoked when your mail arrives.  In this case
       your $HOME/.forward (beware, it has to be world readable) file  should  contain  the  line
       below.   Be sure to include the single and double quotes, and unless you know your site to
       be running smrsh (the SendMail Restricted SHell), it must be an absolute path.

       "|exec /usr/bin/procmail"

       Some mailers (notably exim) do not currently accept the above syntax.  In  such  case  use
       this instead:

       |/usr/bin/procmail

       Procmail can also be invoked to postprocess an already filled system mailbox.  This can be
       useful if you don't want to or  can't  use  a  $HOME/.forward  file  (in  which  case  the
       following  script  could periodically be called from within cron(1), or whenever you start
       reading mail):

              #!/bin/sh

              ORGMAIL=/var/mail/$LOGNAME

              if cd $HOME &&
               test -s $ORGMAIL &&
               lockfile -r0 -l1024 .newmail.lock 2>/dev/null
              then
                trap "rm -f .newmail.lock" 1 2 3 13 15
                umask 077
                lockfile -l1024 -ml
                cat $ORGMAIL >>.newmail &&
                 cat /dev/null >$ORGMAIL
                lockfile -mu
                formail -s procmail <.newmail &&
                 rm -f .newmail
                rm -f .newmail.lock
              fi
              exit 0

   A sample small $HOME/.procmailrc:
       PATH=/usr/local/bin:/usr/bin:/bin
       MAILDIR=$HOME/Mail      #you'd better make sure it exists
       DEFAULT=$MAILDIR/mbox   #completely optional
       LOGFILE=$MAILDIR/from   #recommended

       :0:
       * ^From.*berg
       from_me

       :0
       * ^Subject:.*Flame
       /dev/null

       Other examples for rcfile recipes can be looked up in the procmailex(5) man page.

SOURCE

       This program is part of  the  procmail  mail-processing-package  (v3.23pre)  available  at
       http://www.procmail.org/ or ftp.procmail.org in pub/procmail/.

MAILINGLIST

       There exists a mailinglist for questions relating to any program in the procmail package:
              <procmail-users@procmail.org>
                     for submitting questions/answers.
              <procmail-users-request@procmail.org>
                     for subscription requests.

       If  you  would  like  to  stay  informed  about  new  versions and official patches send a
       subscription request to
              procmail-announce-request@procmail.org
       (this is a readonly list).

AUTHORS

       Stephen R. van den Berg
              <srb@cuci.nl>
       Philip A. Guenther
              <guenther@sendmail.com>