Provided by: libanyevent-perl_7.120-1_amd64 bug

NAME

       AnyEvent::DNS - fully asynchronous DNS resolution

SYNOPSIS

          use AnyEvent::DNS;

          my $cv = AnyEvent->condvar;
          AnyEvent::DNS::a "www.google.de", $cv;
          # ... later
          my @addrs = $cv->recv;

DESCRIPTION

       This module offers both a number of DNS convenience functions as well as a fully
       asynchronous and high-performance pure-perl stub resolver.

       The stub resolver supports DNS over IPv4 and IPv6, UDP and TCP, optional EDNS0 support for
       up to 4kiB datagrams and automatically falls back to virtual circuit mode for large
       responses.

   CONVENIENCE FUNCTIONS
       AnyEvent::DNS::a $domain, $cb->(@addrs)
           Tries to resolve the given domain to IPv4 address(es).

       AnyEvent::DNS::aaaa $domain, $cb->(@addrs)
           Tries to resolve the given domain to IPv6 address(es).

       AnyEvent::DNS::mx $domain, $cb->(@hostnames)
           Tries to resolve the given domain into a sorted (lower preference value first) list of
           domain names.

       AnyEvent::DNS::ns $domain, $cb->(@hostnames)
           Tries to resolve the given domain name into a list of name servers.

       AnyEvent::DNS::txt $domain, $cb->(@hostnames)
           Tries to resolve the given domain name into a list of text records. Only the first
           text string per record will be returned. If you want all strings, you need to call the
           resolver manually:

              resolver->resolve ($domain => "txt", sub {
                 for my $record (@_) {
                    my (undef, undef, undef, @txt) = @$record;
                    # strings now in @txt
                 }
              });

       AnyEvent::DNS::srv $service, $proto, $domain, $cb->(@srv_rr)
           Tries to resolve the given service, protocol and domain name into a list of service
           records.

           Each $srv_rr is an array reference with the following contents: "[$priority, $weight,
           $transport, $target]".

           They will be sorted with lowest priority first, then randomly distributed by weight as
           per RFC 2782.

           Example:

              AnyEvent::DNS::srv "sip", "udp", "schmorp.de", sub { ...
              # @_ = ( [10, 10, 5060, "sip1.schmorp.de" ] )

       AnyEvent::DNS::any $domain, $cb->(@rrs)
           Tries to resolve the given domain and passes all resource records found to the
           callback.

       AnyEvent::DNS::ptr $domain, $cb->(@hostnames)
           Tries to make a PTR lookup on the given domain. See "reverse_lookup" and
           "reverse_verify" if you want to resolve an IP address to a hostname instead.

       AnyEvent::DNS::reverse_lookup $ipv4_or_6, $cb->(@hostnames)
           Tries to reverse-resolve the given IPv4 or IPv6 address (in textual form) into its
           hostname(s). Handles V4MAPPED and V4COMPAT IPv6 addresses transparently.

       AnyEvent::DNS::reverse_verify $ipv4_or_6, $cb->(@hostnames)
           The same as "reverse_lookup", but does forward-lookups to verify that the resolved
           hostnames indeed point to the address, which makes spoofing harder.

           If you want to resolve an address into a hostname, this is the preferred method: The
           DNS records could still change, but at least this function verified that the hostname,
           at one point in the past, pointed at the IP address you originally resolved.

           Example:

              AnyEvent::DNS::reverse_verify "2001:500:2f::f", sub { print shift };
              # => f.root-servers.net

   LOW-LEVEL DNS EN-/DECODING FUNCTIONS
       $AnyEvent::DNS::EDNS0
           This variable decides whether dns_pack automatically enables EDNS0 support. By
           default, this is disabled (0), unless overridden by $ENV{PERL_ANYEVENT_EDNS0}, but
           when set to 1, AnyEvent::DNS will use EDNS0 in all requests.

       $pkt = AnyEvent::DNS::dns_pack $dns
           Packs a perl data structure into a DNS packet. Reading RFC 1035 is strongly
           recommended, then everything will be totally clear. Or maybe not.

           Resource records are not yet encodable.

           Examples:

              # very simple request, using lots of default values:
              { rd => 1, qd => [ [ "host.domain", "a"] ] }

              # more complex example, showing how flags etc. are named:

              {
                 id => 10000,
                 op => "query",
                 rc => "nxdomain",

                 # flags
                 qr => 1,
                 aa => 0,
                 tc => 0,
                 rd => 0,
                 ra => 0,
                 ad => 0,
                 cd => 0,

                 qd => [@rr], # query section
                 an => [@rr], # answer section
                 ns => [@rr], # authority section
                 ar => [@rr], # additional records section
              }

       $dns = AnyEvent::DNS::dns_unpack $pkt
           Unpacks a DNS packet into a perl data structure.

           Examples:

              # an unsuccessful reply
              {
                'qd' => [
                          [ 'ruth.plan9.de.mach.uni-karlsruhe.de', '*', 'in' ]
                        ],
                'rc' => 'nxdomain',
                'ar' => [],
                'ns' => [
                          [
                            'uni-karlsruhe.de',
                            'soa',
                            'in',
                            600,
                            'netserv.rz.uni-karlsruhe.de',
                            'hostmaster.rz.uni-karlsruhe.de',
                            2008052201, 10800, 1800, 2592000, 86400
                          ]
                        ],
                'tc' => '',
                'ra' => 1,
                'qr' => 1,
                'id' => 45915,
                'aa' => '',
                'an' => [],
                'rd' => 1,
                'op' => 'query'
              }

              # a successful reply

              {
                'qd' => [ [ 'www.google.de', 'a', 'in' ] ],
                'rc' => 0,
                'ar' => [
                          [ 'a.l.google.com', 'a', 'in', 3600, '209.85.139.9' ],
                          [ 'b.l.google.com', 'a', 'in', 3600, '64.233.179.9' ],
                          [ 'c.l.google.com', 'a', 'in', 3600, '64.233.161.9' ],
                        ],
                'ns' => [
                          [ 'l.google.com', 'ns', 'in', 3600, 'a.l.google.com' ],
                          [ 'l.google.com', 'ns', 'in', 3600, 'b.l.google.com' ],
                        ],
                'tc' => '',
                'ra' => 1,
                'qr' => 1,
                'id' => 64265,
                'aa' => '',
                'an' => [
                          [ 'www.google.de', 'cname', 'in', 3600, 'www.google.com' ],
                          [ 'www.google.com', 'cname', 'in', 3600, 'www.l.google.com' ],
                          [ 'www.l.google.com', 'a', 'in', 3600, '66.249.93.104' ],
                          [ 'www.l.google.com', 'a', 'in', 3600, '66.249.93.147' ],
                        ],
                'rd' => 1,
                'op' => 0
              }

   THE AnyEvent::DNS RESOLVER CLASS
       This is the class which does the actual protocol work.

       AnyEvent::DNS::resolver
           This function creates and returns a resolver that is ready to use and should mimic the
           default resolver for your system as good as possible. It is used by AnyEvent itself as
           well.

           It only ever creates one resolver and returns this one on subsequent calls - see
           $AnyEvent::DNS::RESOLVER, below, for details.

           Unless you have special needs, prefer this function over creating your own resolver
           object.

           The resolver is created with the following parameters:

              untaint          enabled
              max_outstanding  $ENV{PERL_ANYEVENT_MAX_OUTSTANDING_DNS} (default 10)

           "os_config" will be used for OS-specific configuration, unless
           $ENV{PERL_ANYEVENT_RESOLV_CONF} is specified, in which case that file gets parsed.

       $AnyEvent::DNS::RESOLVER
           This variable stores the default resolver returned by "AnyEvent::DNS::resolver", or
           "undef" when the default resolver hasn't been instantiated yet.

           One can provide a custom resolver (e.g. one with caching functionality) by storing it
           in this variable, causing all subsequent resolves done via "AnyEvent::DNS::resolver"
           to be done via the custom one.

       $resolver = new AnyEvent::DNS key => value...
           Creates and returns a new resolver.

           The following options are supported:

           server => [...]
               A list of server addresses (default: "v127.0.0.1" or "::1") in network format
               (i.e. as returned by "AnyEvent::Socket::parse_address" - both IPv4 and IPv6 are
               supported).

           timeout => [...]
               A list of timeouts to use (also determines the number of retries). To make three
               retries with individual time-outs of 2, 5 and 5 seconds, use "[2, 5, 5]", which is
               also the default.

           search => [...]
               The default search list of suffixes to append to a domain name (default: none).

           ndots => $integer
               The number of dots (default: 1) that a name must have so that the resolver tries
               to resolve the name without any suffixes first.

           max_outstanding => $integer
               Most name servers do not handle many parallel requests very well. This option
               limits the number of outstanding requests to $integer (default: 10), that means if
               you request more than this many requests, then the additional requests will be
               queued until some other requests have been resolved.

           reuse => $seconds
               The number of seconds (default: 300) that a query id cannot be re-used after a
               timeout. If there was no time-out then query ids can be reused immediately.

           untaint => $boolean
               When true, then the resolver will automatically untaint results, and might also
               ignore certain environment variables.

       $resolver->parse_resolv_conf ($string)
           Parses the given string as if it were a resolv.conf file. The following directives are
           supported (but not necessarily implemented).

           "#"- and ";"-style comments, "nameserver", "domain", "search", "sortlist", "options"
           ("timeout", "attempts", "ndots").

           Everything else is silently ignored.

       $resolver->os_config
           Tries so load and parse /etc/resolv.conf on portable operating systems. Tries various
           egregious hacks on windows to force the DNS servers and searchlist out of the system.

           This method must be called at most once before trying to resolve anything.

       $resolver->timeout ($timeout, ...)
           Sets the timeout values. See the "timeout" constructor argument (and note that this
           method expects the timeout values themselves, not an array-reference).

       $resolver->max_outstanding ($nrequests)
           Sets the maximum number of outstanding requests to $nrequests. See the
           "max_outstanding" constructor argument.

       $resolver->request ($req, $cb->($res))
           This is the main low-level workhorse for sending DNS requests.

           This function sends a single request (a hash-ref formated as specified for "dns_pack")
           to the configured nameservers in turn until it gets a response. It handles timeouts,
           retries and automatically falls back to virtual circuit mode (TCP) when it receives a
           truncated reply. It does not handle anything else, such as the domain searchlist or
           relative names - use "->resolve" for that.

           Calls the callback with the decoded response packet if a reply was received, or no
           arguments in case none of the servers answered.

       $resolver->resolve ($qname, $qtype, %options, $cb->(@rr))
           Queries the DNS for the given domain name $qname of type $qtype.

           A $qtype is either a numerical query type (e.g. 1 for A records) or a lowercase name
           (you have to look at the source to see which aliases are supported, but all types from
           RFC 1035, "aaaa", "srv", "spf" and a few more are known to this module). A $qtype of
           "*" is supported and means "any" record type.

           The callback will be invoked with a list of matching result records or none on any
           error or if the name could not be found.

           CNAME chains (although illegal) are followed up to a length of 10.

           The callback will be invoked with arraryefs of the form "[$name, $type, $class, $ttl,
           @data"], where $name is the domain name, $type a type string or number, $class a class
           name, $ttl is the remaining time-to-live and @data is resource-record-dependent data,
           in seconds. For "a" records, this will be the textual IPv4 addresses, for "ns" or
           "cname" records this will be a domain name, for "txt" records these are all the
           strings and so on.

           All types mentioned in RFC 1035, "aaaa", "srv", "naptr" and "spf" are decoded. All
           resource records not known to this module will have the raw "rdata" field as fifth
           array element.

           Note that this resolver is just a stub resolver: it requires a name server supporting
           recursive queries, will not do any recursive queries itself and is not secure when
           used against an untrusted name server.

           The following options are supported:

           search => [$suffix...]
               Use the given search list (which might be empty), by appending each one in turn to
               the $qname. If this option is missing then the configured "ndots" and "search"
               values define its value (depending on "ndots", the empty suffix will be prepended
               or appended to that "search" value). If the $qname ends in a dot, then the
               searchlist will be ignored.

           accept => [$type...]
               Lists the acceptable result types: only result types in this set will be accepted
               and returned. The default includes the $qtype and nothing else. If this list
               includes "cname", then CNAME-chains will not be followed (because you asked for
               the CNAME record).

           class => "class"
               Specify the query class ("in" for internet, "ch" for chaosnet and "hs" for hesiod
               are the only ones making sense). The default is "in", of course.

           Examples:

              # full example, you can paste this into perl:
              use Data::Dumper;
              use AnyEvent::DNS;
              AnyEvent::DNS::resolver->resolve (
                 "google.com", "*", my $cv = AnyEvent->condvar);
              warn Dumper [$cv->recv];

              # shortened result:
              # [
              #   [ 'google.com', 'soa', 'in', 3600, 'ns1.google.com', 'dns-admin.google.com',
              #     2008052701, 7200, 1800, 1209600, 300 ],
              #   [
              #     'google.com', 'txt', 'in', 3600,
              #     'v=spf1 include:_netblocks.google.com ~all'
              #   ],
              #   [ 'google.com', 'a', 'in', 3600, '64.233.187.99' ],
              #   [ 'google.com', 'mx', 'in', 3600, 10, 'smtp2.google.com' ],
              #   [ 'google.com', 'ns', 'in', 3600, 'ns2.google.com' ],
              # ]

              # resolve a records:
              $res->resolve ("ruth.plan9.de", "a", sub { warn Dumper [@_] });

              # result:
              # [
              #   [ 'ruth.schmorp.de', 'a', 'in', 86400, '129.13.162.95' ]
              # ]

              # resolve any records, but return only a and aaaa records:
              $res->resolve ("test1.laendle", "*",
                 accept => ["a", "aaaa"],
                 sub {
                    warn Dumper [@_];
                 }
              );

              # result:
              # [
              #   [ 'test1.laendle', 'a', 'in', 86400, '10.0.0.255' ],
              #   [ 'test1.laendle', 'aaaa', 'in', 60, '3ffe:1900:4545:0002:0240:0000:0000:f7e1' ]
              # ]

       $resolver->wait_for_slot ($cb->($resolver))
           Wait until a free request slot is available and call the callback with the resolver
           object.

           A request slot is used each time a request is actually sent to the nameservers: There
           are never more than "max_outstanding" of them.

           Although you can submit more requests (they will simply be queued until a request slot
           becomes available), sometimes, usually for rate-limiting purposes, it is useful to
           instead wait for a slot before generating the request (or simply to know when the
           request load is low enough so one can submit requests again).

           This is what this method does: The callback will be called when submitting a DNS
           request will not result in that request being queued. The callback may or may not
           generate any requests in response.

           Note that the callback will only be invoked when the request queue is empty, so this
           does not play well if somebody else keeps the request queue full at all times.

AUTHOR

          Marc Lehmann <schmorp@schmorp.de>
          http://anyevent.schmorp.de