NAME

       Config::Model::models::LCDd::sed1520 - Configuration class LCDd::sed1520

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   DelayMult
       On fast machines it may be necessary to slow down transfer to the display.  If this value is set to zero,
       delay is disabled. Any value greater than zero slows down each write by one microsecond. Optional. Type
       integer. upstream_default: '1'.

   HaveInverter
       The original wiring used an inverter to drive the control lines. If you do not use an inverter set
       haveInverter to no. Optional. Type boolean. upstream_default: 'yes'.

   InterfaceType
       Select the interface type (wiring) for the display. Supported values are 68 for 68-style connection
       (RESET level high) and 80 for 80-style connection (RESET level low). Optional. Type enum. choice: '68',
       '80'. upstream_default: '80'.

   InvertedMapping
       On some displays column data in memory is mapped to segment lines from right to left. This is called
       inverted mapping (not to be confused with 'haveInverter' from above). Optional. Type boolean.
       upstream_default: 'no'.

   Port
       Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC. Optional. Type uniline. default: '0x378'.

   UseHardReset
       At least one display is reported (Everbouquet MG1203D) that requires sending three times 0xFF before a
       reset during initialization.Optional. Type boolean. upstream_default: 'no'.

SEE ALSO

       •   cme

perl v5.22.1                                       2016-01-31             Config::Model::...::LCDd::sed1520(3pm)