Provided by: liblog-report-perl_1.13-1_all 
NAME
Log::Report::Dispatcher - manage message dispatching, display or logging
INHERITANCE
Log::Report::Dispatcher is extended by
Log::Report::Dispatcher::Callback
Log::Report::Dispatcher::File
Log::Report::Dispatcher::Log4perl
Log::Report::Dispatcher::LogDispatch
Log::Report::Dispatcher::Perl
Log::Report::Dispatcher::Syslog
Log::Report::Dispatcher::Try
SYNOPSIS
use Log::Report;
# The following will be created for you automatically
dispatcher 'PERL', 'default', accept => 'NOTICE-';
dispatcher close => 'default'; # after deamonize
dispatcher 'FILE', 'log'
, mode => 'DEBUG', to => '/var/log/mydir/myfile';
# Full package name is used, same as 'FILE'
dispatcher Log::Report::Dispatch::File => 'stderr'
, to => \*STDERR, accept => 'NOTICE-';
DESCRIPTION
In Log::Report, dispatchers are used to handle (exception) messages which are created somewhere else.
Those message were produced (thrown) by Log::Report::error() and friends.
This base-class handles the creation of dispatchers, plus the common filtering rules. See the "DETAILS"
section, below.
METHODS
Constructors
$obj->close()
Terminate the dispatcher activities. The dispatcher gets disabled, to avoid the case that it is
accidentally used. Returns "undef" (false) if the dispatcher was already closed.
Log::Report::Dispatcher->new($type, $name, %options)
Create a dispatcher. The $type of back-end to start is required, and listed in the "DESCRIPTION"
part of this manual-page. For various external back-ends, special wrappers are created.
The $name must be uniquely identifying this dispatcher. When a second dispatcher is created (via
Log::Report::dispatcher()) with the name of an existing dispatcher, the existing one will get
replaced.
All %options which are not consumed by this base constructor are passed to the wrapped back-end.
Some of them will check whether all %options are understood, other ignore unknown %options.
-Option --Default
accept depend on mode
charset <undef>
format_reason 'LOWERCASE'
locale <system locale>
mode 'NORMAL'
accept => REASONS
See Log::Report::Util::expand_reasons() for possible values. If the initial mode for this
dispatcher does not need verbose or debug information, then those levels will not be accepted.
When the mode equals "NORMAL" (the default) then "accept"'s default is "NOTICE-". In case of
"VERBOSE"> it will be "INFO-", "ASSERT" results in "ASSERT-", and "DEBUG" in "ALL".
charset => CHARSET
Convert the messages in the specified character-set (codeset). By default, no conversion will take
place, because the right choice cannot be determined automatically.
format_reason => 'UPPERCASE'|'LOWERCASE'|'UCFIRST'|'IGNORE'|CODE
How to show the reason text which is printed before the message. When a CODE is specified, it will
be called with a translated text and the returned text is used.
locale => LOCALE
Overrules the global setting. Can be overruled by Log::Report::report(locale).
mode => 'NORMAL'|'VERBOSE'|'ASSERT'|'DEBUG'|0..3
Possible values are "NORMAL" (or 0 or "undef"), which will not show "INFO" or debug messages,
"VERBOSE" (1; shows "INFO" not debug), "ASSERT" (2; only ignores "TRACE" messages), or "DEBUG" (3)
which shows everything. See section "Run modes" in Log::Report.
You are advised to use the symbolic mode names when the mode is changed within your program: the
numerical values are available for smooth Getopt::Long integration.
Accessors
$obj->isDisabled()
$obj->mode()
Returns the mode in use for the dispatcher as number. See new(mode) and "Run modes" in Log::Report.
$obj->name()
Returns the unique name of this dispatcher.
$obj->needs( [$reason] )
Returns the list with all REASONS which are needed to fulfill this dispatcher's needs. When
disabled, the list is empty, but not forgotten.
[0.999] when only one $reason is specified, it is returned if in the list.
$obj->type()
The dispatcher $type, which is usually the same as the class of this object, but not in case of
wrappers like for Log::Dispatch.
Logging
$obj->addSkipStack(@CODE)
Log::Report::Dispatcher->addSkipStack(@CODE)
[1.13] Add one or more CODE blocks of caller lines which should not be collected for stack-traces or
location display. A CODE gets called with an ARRAY of caller information, and returns true when that
line should get skipped.
Warning: this logic is applied globally: on all dispatchers.
example:
By default, all lines in the Log::Report packages are skipped from display, with a simple CODE as
this:
sub in_lr { $_[0][0] =~ m/^Log\:\:Report(?:\:\:|$)/ }
Log::Report::Dispatcher->addSkipStack(\&in_lr);
The only parameter to in_lr is the return of caller(). The first element of that ARRAY is the
package name of a stack line.
$obj->collectLocation()
Log::Report::Dispatcher->collectLocation()
Collect the information to be displayed as line where the error occurred.
$obj->collectStack( [$maxdepth] )
Log::Report::Dispatcher->collectStack( [$maxdepth] )
Returns an ARRAY of ARRAYs with text, filename, line-number.
$obj->log(HASH-$of-%options, $reason, $message, $domain)
This method is called by Log::Report::report() and should not be called directly. Internally, it
will call translate(), which does most $of the work.
$obj->skipStack()
[1.13] Returns the number of nestings in the stack which should be skipped to get outside the
Log::Report (and related) modules. The end-user does not want to see those internals in stack-
traces.
$obj->stackTraceLine(%options)
Log::Report::Dispatcher->stackTraceLine(%options)
-Option --Default
abstract 1
call <required>
filename <required>
linenr <required>
max_line undef
max_params 8
package <required>
params <required>
abstract => INTEGER
The higher the abstraction value, the less details are given about the caller. The minimum
abstraction is specified, and then increased internally to make the line fit within the "max_line"
margin.
call => STRING
filename => STRING
linenr => INTEGER
max_line => INTEGER
max_params => INTEGER
package => CLASS
params => ARRAY
$obj->translate(HASH-$of-%options, $reason, $message)
See "Processing the message", which describes the actions taken by this method. A string is
returned, which ends on a new-line, and may be multi-line (in case a stack trace is produced).
DETAILS
Available back-ends
When a dispatcher is created (via new() or Log::Report::dispatcher()), you must specify the TYPE of the
dispatcher. This can either be a class name, which extends a Log::Report::Dispatcher, or a pre-defined
abbreviation of a class name. Implemented are:
Log::Report::Dispatcher::Perl (abbreviation 'PERL')
Use Perl's own "print()", "warn()" and "die()" to ventilate reports. This is the default dispatcher.
Log::Report::Dispatcher::File (abbreviation 'FILE')
Logs the message into a file, which can either be opened by the class or be opened before the
dispatcher is created.
Log::Report::Dispatcher::Syslog (abbreviation 'SYSLOG')
Send messages into the system's syslog infrastructure, using Sys::Syslog.
Log::Report::Dispatcher::Callback (abbreviation 'CALLBACK')
Calls any CODE reference on receipt of each selected message, for instance to send important message
as email or SMS.
"Log::Dispatch::*"
All of the Log::Dispatch::Output extensions can be used directly. The
Log::Report::Dispatcher::LogDispatch will wrap around that back-end.
"Log::Log4perl"
Use the Log::Log4perl main object to write to dispatchers. This infrastructure uses a configuration
file.
Log::Report::Dispatcher::Try (abbreviation 'TRY')
Used by function Log::Report::try(). It collects the exceptions and can produce them on request.
Processing the message
Addition information
The modules which use "Log::Report" will only specify the base of the message string. The base
dispatcher and the back-ends will extend this message with additional information:
. the reason
. the filename/line-number where the problem appeared
. the filename/line-number where it problem was reported
. the error text in $!
. a stack-trace
. a trailing new-line
When the message is a translatable object (Log::Report::Message, for instance created with
Log::Report::__()), then the added components will get translated as well. Otherwise, all will be in
English.
Exactly what will be added depends on the actual mode of the dispatcher (change it with mode(), initiate
it with new(mode)).
mode mode mode mode
REASON SOURCE TE! NORM VERB ASSE DEBUG
trace program ... S
assert program ... SL SL
info program T.. S S S
notice program T.. S S S S
mistake user T.. S S S SL
warning program T.. S S SL SL
error user TE. S S SL SC
fault system TE! S S SL SC
alert system T.! SL SL SC SC
failure system TE! SL SL SC SC
panic program .E. SC SC SC SC
T - usually translated
E - exception (execution interrupted)
! - will include $! text at display
L - include filename and linenumber
S - show/print when accepted
C - stack trace (like Carp::confess())
Filters
With a filter, you can block or modify specific messages before translation. There may be a wish to
change the REASON of a report or its content. It is not possible to avoid the exit which is related to
the original message, because a module's flow depends on it to happen.
When there are filters defined, they will be called in order of definition. For each of the dispatchers
which are called for a certain REASON (which "accept" that REASON), it is checked whether its name is
listed for the filter (when no names where specified, then the filter is applied to all dispatchers).
When selected, the filter's CODE reference is called with four arguments: the dispatcher object (a
Log::Report::Dispatcher), the HASH-of-OPTIONS passed as optional first argument to Log::Report::report(),
the REASON, and the MESSAGE. Returned is the new REASON and MESSAGE. When the returned REASON is
"undef", then the message will be ignored for that dispatcher.
Be warned about processing the MESSAGE: it is a Log::Report::Message object which may have a "prepend"
string and "append" string or object. When the call to Log::Report::report() contained multiple comma-
separated components, these will already have been joined together using concatenation (see
Log::Report::Message::concat().
SEE ALSO
This module is part of Log-Report distribution version 1.13, built on February 03, 2016. Website:
http://perl.overmeer.net/log-report/
LICENSE
Copyrights 2007-2016 by [Mark Overmeer]. For other contributors see ChangeLog.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself. See http://www.perl.com/perl/misc/Artistic.html