Provided by: pdl_2.007-5_amd64 
NAME
PDL::Slatec - PDL interface to the slatec numerical programming library
SYNOPSIS
use PDL::Slatec;
($ndeg, $r, $ierr, $a) = polyfit($x, $y, $w, $maxdeg, $eps);
DESCRIPTION
This module serves the dual purpose of providing an interface to parts of the slatec library and showing
how to interface PDL to an external library. Using this library requires a fortran compiler; the source
for the routines is provided for convenience.
Currently available are routines to: manipulate matrices; calculate FFT's; fit data using polynomials;
and interpolate/integrate data using piecewise cubic Hermite interpolation.
Piecewise cubic Hermite interpolation (PCHIP)
PCHIP is the slatec package of routines to perform piecewise cubic Hermite interpolation of data. It
features software to produce a monotone and "visually pleasing" interpolant to monotone data. According
to Fritsch & Carlson ("Monotone piecewise cubic interpolation", SIAM Journal on Numerical Analysis 17, 2
(April 1980), pp. 238-246), such an interpolant may be more reasonable than a cubic spline if the data
contains both "steep" and "flat" sections. Interpolation of cumulative probability distribution
functions is another application. These routines are cryptically named (blame FORTRAN), beginning with
'ch', and accept either float or double piddles.
Most of the routines require an integer parameter called "check"; if set to 0, then no checks on the
validity of the input data are made, otherwise these checks are made. The value of "check" can be set to
0 if a routine such as chim has already been successfully called.
• If not known, estimate derivative values for the points using the chim, chic, or chsp routines (the
following routines require both the function ("f") and derivative ("d") values at a set of points
("x")).
• Evaluate, integrate, or differentiate the resulting PCH function using the routines: chfd; chfe;
chia; chid.
• If desired, you can check the monotonicity of your data using chcm.
FUNCTIONS
eigsys
Eigenvalues and eigenvectors of a real positive definite symmetric matrix.
($eigvals,$eigvecs) = eigsys($mat)
Note: this function should be extended to calculate only eigenvalues if called in scalar context!
matinv
Inverse of a square matrix
($inv) = matinv($mat)
polyfit
Convenience wrapper routine about the "polfit" "slatec" function. Separates supplied arguments and
return values.
Fit discrete data in a least squares sense by polynomials in one variable. Handles threading
correctly--one can pass in a 2D PDL (as $y) and it will pass back a 2D PDL, the rows of which are the
polynomial regression results (in $r corresponding to the rows of $y.
($ndeg, $r, $ierr, $a, $coeffs, $rms) = polyfit($x, $y, $w, $maxdeg, [$eps]);
$coeffs = polyfit($x,$y,$w,$maxdeg,[$eps]);
where on input:
$x and $y are the values to fit to a polynomial. $w are weighting factors $maxdeg is the maximum degree
of polynomial to use and $eps is the required degree of fit.
and the output switches on list/scalar context.
In list context:
$ndeg is the degree of polynomial actually used $r is the values of the fitted polynomial $ierr is a
return status code, and $a is some working array or other (preserved for historical purposes) $coeffs is
the polynomial coefficients of the best fit polynomial. $rms is the rms error of the fit.
In scalar context, only $coeffs is returned.
Historically, $eps was modified in-place to be a return value of the rms error. This usage is
deprecated, and $eps is an optional parameter now. It is still modified if present.
$a is a working array accessible to Slatec - you can feed it to several other Slatec routines to get nice
things out. It does not thread correctly and should probably be fixed by someone. If you are reading
this, that someone might be you.
This version of polyfit handles bad values correctly. Bad values in $y are ignored for the fit and give
computed values on the fitted curve in the return. Bad values in $x or $w are ignored for the fit and
result in bad elements in the output.
polycoef
Convenience wrapper routine around the "pcoef" "slatec" function. Separates supplied arguments and
return values.
Convert the "polyfit"/"polfit" coefficients to Taylor series form.
$tc = polycoef($l, $c, $a);
polyvalue
Convenience wrapper routine around the "pvalue" "slatec" function. Separates supplied arguments and
return values.
For multiple input x positions, a corresponding y position is calculated.
The derivatives PDL is one dimensional (of size "nder") if a single x position is supplied, two
dimensional if more than one x position is supplied.
Use the coefficients generated by "polyfit" (or "polfit") to evaluate the polynomial fit of degree "l",
along with the first "nder" of its derivatives, at a specified point.
($yfit, $yp) = polyvalue($l, $nder, $x, $a);
detslatec
compute the determinant of an invertible matrix
$mat = zeroes(5,5); $mat->diagonal(0,1) .= 1; # unity matrix
$det = detslatec $mat;
Usage:
$determinant = detslatec $matrix;
Signature: detslatec(mat(n,m); [o] det())
"detslatec" computes the determinant of an invertible matrix and barfs if the matrix argument provided is
non-invertible. The matrix threads as usual.
This routine was previously known as "det" which clashes now with det which is provided by
PDL::MatrixOps. For the moment PDL::Slatec will also load PDL::MatrixOps thereby making sure that older
scripts work.
PDL::Slatec::fft
Fast Fourier Transform
$v_in = pdl(1,0,1,0);
($azero,$a,$b) = PDL::Slatec::fft($v_in);
"PDL::Slatec::fft" is a convenience wrapper for ezfftf, and performs a Fast Fourier Transform on an input
vector $v_in. The return values are the same as for ezfftf.
PDL::Slatec::rfft
reverse Fast Fourier Transform
$v_out = PDL::Slatec::rfft($azero,$a,$b);
print $v_in, $vout
[1 0 1 0] [1 0 1 0]
"PDL::Slatec::rfft" is a convenience wrapper for ezfftb, and performs a reverse Fast Fourier Transform.
The input is the same as the output of PDL::Slatec::fft, and the output of "rfft" is a data vector,
similar to what is input into PDL::Slatec::fft.
svdc
Signature: (x(n,p);[o]s(p);[o]e(p);[o]u(n,p);[o]v(p,p);[o]work(n);longlong job();longlong [o]info())
singular value decomposition of a matrix
svdc does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
poco
Signature: (a(n,n);rcond();[o]z(n);longlong [o]info())
Factor a real symmetric positive definite matrix and estimate the condition number of the matrix.
poco does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
geco
Signature: (a(n,n);longlong [o]ipvt(n);[o]rcond();[o]z(n))
Factor a matrix using Gaussian elimination and estimate the condition number of the matrix.
geco does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
gefa
Signature: (a(n,n);longlong [o]ipvt(n);longlong [o]info())
Factor a matrix using Gaussian elimination.
gefa does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
podi
Signature: (a(n,n);[o]det(two=2);longlong job())
Compute the determinant and inverse of a certain real symmetric positive definite matrix using the
factors computed by poco.
podi does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
gedi
Signature: (a(n,n);longlong [o]ipvt(n);[o]det(two=2);[o]work(n);longlong job())
Compute the determinant and inverse of a matrix using the factors computed by geco or gefa.
gedi does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
gesl
Signature: (a(lda,n);longlong ipvt(n);b(n);longlong job())
Solve the real system "A*X=B" or "TRANS(A)*X=B" using the factors computed by geco or gefa.
gesl does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
rs
Signature: (a(n,n);[o]w(n);longlong matz();[o]z(n,n);[t]fvone(n);[t]fvtwo(n);longlong [o]ierr())
This subroutine calls the recommended sequence of subroutines from the eigensystem subroutine package
(EISPACK) to find the eigenvalues and eigenvectors (if desired) of a REAL SYMMETRIC matrix.
rs does not process bad values. It will set the bad-value flag of all output piddles if the flag is set
for any of the input piddles.
ezffti
Signature: (longlong n();[o]wsave(foo))
Subroutine ezffti initializes the work array "wsave()" which is used in both ezfftf and ezfftb. The
prime factorization of "n" together with a tabulation of the trigonometric functions are computed and
stored in "wsave()".
ezffti does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
ezfftf
Signature: (r(n);[o]azero();[o]a(n);[o]b(n);wsave(foo))
ezfftf does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
ezfftb
Signature: ([o]r(n);azero();a(n);b(n);wsave(foo))
ezfftb does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
pcoef
Signature: (longlong l();c();[o]tc(bar);a(foo))
Convert the "polfit" coefficients to Taylor series form. "c" and "a()" must be of the same type.
pcoef does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
pvalue
Signature: (longlong l();x();[o]yfit();[o]yp(nder);a(foo))
Use the coefficients generated by "polfit" to evaluate the polynomial fit of degree "l", along with the
first "nder" of its derivatives, at a specified point. "x" and "a" must be of the same type.
pvalue does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chim
Signature: (x(n);f(n);[o]d(n);longlong [o]ierr())
Calculate the derivatives of (x,f(x)) using cubic Hermite interpolation.
Calculate the derivatives at the given set of points ("$x,$f", where $x is strictly increasing). The
resulting set of points - "$x,$f,$d", referred to as the cubic Hermite representation - can then be used
in other functions, such as chfe, chfd, and chia.
The boundary conditions are compatible with monotonicity, and if the data are only piecewise monotonic,
the interpolant will have an extremum at the switch points; for more control over these issues use chic.
Error status returned by $ierr:
• 0 if successful.
• > 0 if there were "ierr" switches in the direction of monotonicity (data still valid).
• -1 if "nelem($x) < 2".
• -3 if $x is not strictly increasing.
chim does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chic
Signature: (longlong ic(two=2);vc(two=2);mflag();x(n);f(n);[o]d(n);wk(nwk);longlong [o]ierr())
Calculate the derivatives of (x,f(x)) using cubic Hermite interpolation.
Calculate the derivatives at the given points ("$x,$f", where $x is strictly increasing). Control over
the boundary conditions is given by the $ic and $vc piddles, and the value of $mflag determines the
treatment of points where monotoncity switches direction. A simpler, more restricted, interface is
available using chim.
The first and second elements of $ic determine the boundary conditions at the start and end of the data
respectively. If the value is 0, then the default condition, as used by chim, is adopted. If greater
than zero, no adjustment for monotonicity is made, otherwise if less than zero the derivative will be
adjusted. The allowed magnitudes for ic(0) are:
• 1 if first derivative at x(0) is given in vc(0).
• 2 if second derivative at x(0) is given in vc(0).
• 3 to use the 3-point difference formula for d(0). (Reverts to the default b.c. if "n < 3")
• 4 to use the 4-point difference formula for d(0). (Reverts to the default b.c. if "n < 4")
• 5 to set d(0) so that the second derivative is continuous at x(1). (Reverts to the default b.c. if
"n < 4")
The values for ic(1) are the same as above, except that the first-derivative value is stored in vc(1) for
cases 1 and 2. The values of $vc need only be set if options 1 or 2 are chosen for $ic.
Set "$mflag = 0" if interpolant is required to be monotonic in each interval, regardless of the data.
This causes $d to be set to 0 at all switch points. Set $mflag to be non-zero to use a formula based on
the 3-point difference formula at switch points. If "$mflag > 0", then the interpolant at swich points is
forced to not deviate from the data by more than "$mflag*dfloc", where "dfloc" is the maximum of the
change of $f on this interval and its two immediate neighbours. If "$mflag < 0", no such control is to
be imposed.
The piddle $wk is only needed for work space. However, I could not get it to work as a temporary
variable, so you must supply it; it is a 1D piddle with "2*n" elements.
Error status returned by $ierr:
• 0 if successful.
• 1 if "ic(0) < 0" and d(0) had to be adjusted for monotonicity.
• 2 if "ic(1) < 0" and "d(n-1)" had to be adjusted for monotonicity.
• 3 if both 1 and 2 are true.
• -1 if "n < 2".
• -3 if $x is not strictly increasing.
• -4 if "abs(ic(0)) > 5".
• -5 if "abs(ic(1)) > 5".
• -6 if both -4 and -5 are true.
• -7 if "nwk < 2*(n-1)".
chic does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chsp
Signature: (longlong ic(two=2);vc(two=2);x(n);f(n);[o]d(n);wk(nwk);longlong [o]ierr())
Calculate the derivatives of (x,f(x)) using cubic spline interpolation.
Calculate the derivatives, using cubic spline interpolation, at the given points ("$x,$f"), with the
specified boundary conditions. Control over the boundary conditions is given by the $ic and $vc piddles.
The resulting values - "$x,$f,$d" - can be used in all the functions which expect a cubic Hermite
function.
The first and second elements of $ic determine the boundary conditions at the start and end of the data
respectively. The allowed values for ic(0) are:
• 0 to set d(0) so that the third derivative is continuous at x(1).
• 1 if first derivative at x(0) is given in "vc(0").
• 2 if second derivative at "x(0") is given in vc(0).
• 3 to use the 3-point difference formula for d(0). (Reverts to the default b.c. if "n < 3".)
• 4 to use the 4-point difference formula for d(0). (Reverts to the default b.c. if "n < 4".)
The values for ic(1) are the same as above, except that the first-derivative value is stored in vc(1) for
cases 1 and 2. The values of $vc need only be set if options 1 or 2 are chosen for $ic.
The piddle $wk is only needed for work space. However, I could not get it to work as a temporary
variable, so you must supply it; it is a 1D piddle with "2*n" elements.
Error status returned by $ierr:
• 0 if successful.
• -1 if "nelem($x) < 2".
• -3 if $x is not strictly increasing.
• -4 if "ic(0) < 0" or "ic(0) > 4".
• -5 if "ic(1) < 0" or "ic(1) > 4".
• -6 if both of the above are true.
• -7 if "nwk < 2*n".
• -8 in case of trouble solving the linear system for the interior derivative values.
chsp does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chfd
Signature: (x(n);f(n);d(n);longlong check();xe(ne);[o]fe(ne);[o]de(ne);longlong [o]ierr())
Interpolate function and derivative values.
Given a piecewise cubic Hermite function - such as from chim - evaluate the function ($fe) and derivative
($de) at a set of points ($xe). If function values alone are required, use chfe. Set "check" to 0 to
skip checks on the input data.
Error status returned by $ierr:
• 0 if successful.
• >0 if extrapolation was performed at "ierr" points (data still valid).
• -1 if "nelem($x) < 2"
• -3 if $x is not strictly increasing.
• -4 if "nelem($xe) < 1".
• -5 if an error has occurred in a lower-level routine, which should never happen.
chfd does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chfe
Signature: (x(n);f(n);d(n);longlong check();xe(ne);[o]fe(ne);longlong [o]ierr())
Interpolate function values.
Given a piecewise cubic Hermite function - such as from chim - evaluate the function ($fe) at a set of
points ($xe). If derivative values are also required, use chfd. Set "check" to 0 to skip checks on the
input data.
Error status returned by $ierr:
• 0 if successful.
• >0 if extrapolation was performed at "ierr" points (data still valid).
• -1 if "nelem($x) < 2"
• -3 if $x is not strictly increasing.
• -4 if "nelem($xe) < 1".
chfe does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chia
Signature: (x(n);f(n);d(n);longlong check();a();b();[o]ans();longlong [o]ierr())
Integrate (x,f(x)) over arbitrary limits.
Evaluate the definite integral of a a piecewise cubic Hermite function over an arbitrary interval, given
by "[$a,$b]". See chid if the integration limits are data points. Set "check" to 0 to skip checks on
the input data.
The values of $a and $b do not have to lie within $x, although the resulting integral value will be
highly suspect if they are not.
Error status returned by $ierr:
• 0 if successful.
• 1 if $a lies outside $x.
• 2 if $b lies outside $x.
• 3 if both 1 and 2 are true.
• -1 if "nelem($x) < 2"
• -3 if $x is not strictly increasing.
• -4 if an error has occurred in a lower-level routine, which should never happen.
chia does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chid
Signature: (x(n);f(n);d(n);longlong check();longlong ia();longlong ib();[o]ans();longlong [o]ierr())
Integrate (x,f(x)) between data points.
Evaluate the definite integral of a a piecewise cubic Hermite function between "x($ia)" and "x($ib)".
See chia for integration between arbitrary limits.
Although using a fortran routine, the values of $ia and $ib are zero offset. Set "check" to 0 to skip
checks on the input data.
Error status returned by $ierr:
• 0 if successful.
• -1 if "nelem($x) < 2".
• -3 if $x is not strictly increasing.
• -4 if $ia or $ib is out of range.
chid does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chcm
Signature: (x(n);f(n);d(n);longlong check();longlong [o]ismon(n);longlong [o]ierr())
Check the given piecewise cubic Hermite function for monotonicity.
The outout piddle $ismon indicates over which intervals the function is monotonic. Set "check" to 0 to
skip checks on the input data.
For the data interval "[x(i),x(i+1)]", the values of ismon(i) can be:
• -3 if function is probably decreasing
• -1 if function is strictly decreasing
• 0 if function is constant
• 1 if function is strictly increasing
• 2 if function is non-monotonic
• 3 if function is probably increasing
If "abs(ismon(i)) == 3", the derivative values are near the boundary of the monotonicity region. A small
increase produces non-monotonicity, whereas a decrease produces strict monotonicity.
The above applies to "i = 0 .. nelem($x)-1". The last element of $ismon indicates whether the entire
function is monotonic over $x.
Error status returned by $ierr:
• 0 if successful.
• -1 if "n < 2".
• -3 if $x is not strictly increasing.
chcm does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
chbs
Signature: (x(n);f(n);d(n);longlong knotyp();longlong nknots();t(tsize);[o]bcoef(bsize);longlong [o]ndim();longlong [o]kord();longlong [o]ierr())
Piecewise Cubic Hermite function to B-Spline converter.
The resulting B-spline representation of the data (i.e. "nknots", "t", "bcoeff", "ndim", and "kord") can
be evaluated by "bvalu" (which is currently not available).
Array sizes: "tsize = 2*n + 4", "bsize = 2*n", and "ndim = 2*n".
"knotyp" is a flag which controls the knot sequence. The knot sequence "t" is normally computed from $x
by putting a double knot at each "x" and setting the end knot pairs according to the value of "knotyp"
(where "m = ndim = 2*n"):
• 0 - Quadruple knots at the first and last points.
• 1 - Replicate lengths of extreme subintervals: "t( 0 ) = t( 1 ) = x(0) - (x(1)-x(0))" and "t(m+3) =
t(m+2) = x(n-1) + (x(n-1)-x(n-2))"
• 2 - Periodic placement of boundary knots: "t( 0 ) = t( 1 ) = x(0) - (x(n-1)-x(n-2))" and "t(m+3) =
t(m+2) = x(n) + (x(1)-x(0))"
• <0 - Assume the "nknots" and "t" were set in a previous call.
"nknots" is the number of knots and may be changed by the routine. If "knotyp >= 0", "nknots" will be
set to "ndim+4", otherwise it is an input variable, and an error will occur if its value is not equal to
"ndim+4".
"t" is the array of "2*n+4" knots for the B-representation and may be changed by the routine. If "knotyp
>= 0", "t" will be changed so that the interior double knots are equal to the x-values and the boundary
knots set as indicated above, otherwise it is assumed that "t" was set by a previous call (no check is
made to verify that the data forms a legitimate knot sequence).
Error status returned by $ierr:
• 0 if successful.
• -4 if "knotyp > 2".
• -5 if "knotyp < 0" and "nknots != 2*n + 4".
chbs does not process bad values. It will set the bad-value flag of all output piddles if the flag is
set for any of the input piddles.
polfit
Signature: (x(n); y(n); w(n); longlong maxdeg(); longlong [o]ndeg(); [o]eps(); [o]r(n); longlong [o]ierr(); [o]a(foo); [o]coeffs(bar);[t]xtmp(n);[t]ytmp(n);[t]wtmp(n);[t]rtmp(n))
Fit discrete data in a least squares sense by polynomials
in one variable. "x()", "y()" and "w()" must be of the same type. This version handles
bad values appropriately
polfit processes bad values. It will set the bad-value flag of all output piddles if the flag is set for
any of the input piddles.
AUTHOR
Copyright (C) 1997 Tuomas J. Lukka. Copyright (C) 2000 Tim Jenness, Doug Burke. All rights reserved.
There is no warranty. You are allowed to redistribute this software / documentation under certain
conditions. For details, see the file COPYING in the PDL distribution. If this file is separated from the
PDL distribution, the copyright notice should be included in the file.