Ubuntu Manpage: Pod::Usage - print a usage message from embedded pod documentation

Provided by: perl-doc_5.22.1-9ubuntu0.9_all

NAME

       Pod::Usage - print a usage message from embedded pod documentation

SYNOPSIS

         use Pod::Usage

         my $message_text  = "This text precedes the usage message.";
         my $exit_status   = 2;          ## The exit status to use
         my $verbose_level = 0;          ## The verbose level to use
         my $filehandle    = \*STDERR;   ## The filehandle to write to

         pod2usage($message_text);

         pod2usage($exit_status);

         pod2usage( { -message => $message_text ,
                      -exitval => $exit_status  ,
                      -verbose => $verbose_level,
                      -output  => $filehandle } );

         pod2usage(   -msg     => $message_text ,
                      -exitval => $exit_status  ,
                      -verbose => $verbose_level,
                      -output  => $filehandle   );

         pod2usage(   -verbose => 2,
                      -noperldoc => 1  )

ARGUMENTS

pod2usage should be given either a single argument, or a list of arguments corresponding to an
associative array (a "hash"). When a single argument is given, it should correspond to exactly one of the
following:

• A string containing the text of a message to print before printing the usage message

• A numeric value corresponding to the desired exit status

• A reference to a hash

If more than one argument is given then the entire argument list is assumed to be a hash. If a hash is
supplied (either as a reference or as a list) it should contain one or more elements with the following
keys:

"-message"
"-msg"
The text of a message to print immediately prior to printing the program's usage message.

"-exitval"
The desired exit status to pass to the exit() function. This should be an integer, or else the
string "NOEXIT" to indicate that control should simply be returned without terminating the invoking
process.

"-verbose"
The desired level of "verboseness" to use when printing the usage message. If the corresponding value
is 0, then only the "SYNOPSIS" section of the pod documentation is printed. If the corresponding
value is 1, then the "SYNOPSIS" section, along with any section entitled "OPTIONS", "ARGUMENTS", or
"OPTIONS AND ARGUMENTS" is printed. If the corresponding value is 2 or more then the entire manpage
is printed.

The special verbosity level 99 requires to also specify the -sections parameter; then these sections
are extracted and printed.

"-sections"
A string representing a selection list for sections to be printed when -verbose is set to 99, e.g.
"NAME|SYNOPSIS|DESCRIPTION|VERSION".

Alternatively, an array reference of section specifications can be used:

pod2usage(-verbose => 99,
-sections => [ qw(fred fred/subsection) ] );

"-output"
A reference to a filehandle, or the pathname of a file to which the usage message should be written.
The default is "\*STDERR" unless the exit value is less than 2 (in which case the default is
"\*STDOUT").

"-input"
A reference to a filehandle, or the pathname of a file from which the invoking script's pod
documentation should be read. It defaults to the file indicated by $0 ($PROGRAM_NAME for users of
English.pm).

If you are calling pod2usage() from a module and want to display that module's POD, you can use this:

use Pod::Find qw(pod_where);
pod2usage( -input => pod_where({-inc => 1}, __PACKAGE__) );

"-pathlist"
A list of directory paths. If the input file does not exist, then it will be searched for in the
given directory list (in the order the directories appear in the list). It defaults to the list of
directories implied by $ENV{PATH}. The list may be specified either by a reference to an array, or by
a string of directory paths which use the same path separator as $ENV{PATH} on your system (e.g., ":"
for Unix, ";" for MSWin32 and DOS).

"-noperldoc"
By default, Pod::Usage will call perldoc when -verbose >= 2 is specified. This does not work well
e.g. if the script was packed with PAR. The -noperldoc option suppresses the external call to perldoc
and uses the simple text formatter (Pod::Text) to output the POD.

Formatting base class
The default text formatter is Pod::Text. The base class for Pod::Usage can be defined by pre-setting
$Pod::Usage::Formatter before loading Pod::Usage, e.g.:

BEGIN { $Pod::Usage::Formatter = 'Pod::Text::Termcap'; }
use Pod::Usage qw(pod2usage);

Pass-through options
The following options are passed through to the underlying text formatter. See the manual pages of these
modules for more information.

alt code indent loose margin quotes sentence stderr utf8 width

DESCRIPTION

       pod2usage will print a usage message for the invoking script (using its embedded pod  documentation)  and
       then  exit  the  script with the desired exit status. The usage message printed may have any one of three
       levels of "verboseness": If the verbose level is 0, then only a synopsis is printed. If the verbose level
       is 1, then the synopsis is printed along with a description (if present) of the command line options  and
       arguments. If the verbose level is 2, then the entire manual page is printed.

       Unless  they  are explicitly specified, the default values for the exit status, verbose level, and output
       stream to use are determined as follows:

       •   If neither the exit status nor the verbose level is specified, then the default is  to  use  an  exit
           status of 2 with a verbose level of 0.

       •   If an exit status is specified but the verbose level is not, then the verbose level will default to 1
           if the exit status is less than 2 and will default to 0 otherwise.

       •   If an exit status is not specified but verbose level is given, then the exit status will default to 2
           if the verbose level is 0 and will default to 1 otherwise.

       •   If  the  exit  status  used  is less than 2, then output is printed on "STDOUT".  Otherwise output is
           printed on "STDERR".

       Although the above may seem a bit confusing at first,  it  generally  does  "the  right  thing"  in  most
       situations.   This  determination  of  the default values to use is based upon the following typical Unix
       conventions:

       •   An exit status of 0 implies "success". For example, diff(1) exits with a status of 0 if the two files
           have the same contents.

       •   An exit status of 1 implies possibly abnormal, but non-defective, program termination.  For  example,
           grep(1) exits with a status of 1 if it did not find a matching line for the given regular expression.

       •   An exit status of 2 or more implies a fatal error. For example, ls(1) exits with a status of 2 if you
           specify an illegal (unknown) option on the command line.

       •   Usage  messages  issued as a result of bad command-line syntax should go to "STDERR".  However, usage
           messages issued due to an explicit request to print usage (like specifying -help on the command line)
           should go to "STDOUT", just in case the user wants to pipe the output to a pager (such as more(1)).

       •   If program usage has been explicitly requested by the user, it is often  desirable  to  exit  with  a
           status  of  1 (as opposed to 0) after issuing the user-requested usage message.  It is also desirable
           to give a more verbose description of program usage in this case.

       pod2usage doesn't force the above conventions upon you, but it will use them  by  default  if  you  don't
       expressly  tell  it  to  do  otherwise.  The ability of pod2usage() to accept a single number or a string
       makes it convenient to use as an innocent looking error message handling function:

           use strict;
           use Pod::Usage;
           use Getopt::Long;

           ## Parse options
           my %opt;
           GetOptions(\%opt, "help|?", "man", "flag1")  ||  pod2usage(2);
           pod2usage(1)  if ($opt{help});
           pod2usage(-exitval => 0, -verbose => 2)  if ($opt{man});

           ## Check for too many filenames
           pod2usage("$0: Too many files given.\n")  if (@ARGV > 1);

       Some user's however may feel that the above "economy of expression"  is  not  particularly  readable  nor
       consistent and may instead choose to do something more like the following:

           use strict;
           use Pod::Usage qw(pod2usage);
           use Getopt::Long qw(GetOptions);

           ## Parse options
           my %opt;
           GetOptions(\%opt, "help|?", "man", "flag1")  ||
             pod2usage(-verbose => 0);

           pod2usage(-verbose => 1)  if ($opt{help});
           pod2usage(-verbose => 2)  if ($opt{man});

           ## Check for too many filenames
           pod2usage(-verbose => 2, -message => "$0: Too many files given.\n")
             if (@ARGV > 1);

       As  with  all  things  in  Perl,  there's  more  than  one  way to do it, and pod2usage() adheres to this
       philosophy.  If you are interested in seeing a number of different ways to invoke pod2usage (although  by
       no means exhaustive), please refer to "EXAMPLES".

   Scripts
       The  Pod::Usage  distribution  comes with a script pod2usage which offers a command line interface to the
       functionality of Pod::Usage. See pod2usage.

EXAMPLES

       Each of the following invocations of "pod2usage()" will print just the "SYNOPSIS" section to "STDERR" and
       will exit with a status of 2:

           pod2usage();

           pod2usage(2);

           pod2usage(-verbose => 0);

           pod2usage(-exitval => 2);

           pod2usage({-exitval => 2, -output => \*STDERR});

           pod2usage({-verbose => 0, -output  => \*STDERR});

           pod2usage(-exitval => 2, -verbose => 0);

           pod2usage(-exitval => 2, -verbose => 0, -output => \*STDERR);

       Each of the following invocations of "pod2usage()" will print a message of "Syntax error." (followed by a
       newline) to "STDERR", immediately followed by just the "SYNOPSIS" section (also printed to "STDERR")  and
       will exit with a status of 2:

           pod2usage("Syntax error.");

           pod2usage(-message => "Syntax error.", -verbose => 0);

           pod2usage(-msg  => "Syntax error.", -exitval => 2);

           pod2usage({-msg => "Syntax error.", -exitval => 2, -output => \*STDERR});

           pod2usage({-msg => "Syntax error.", -verbose => 0, -output => \*STDERR});

           pod2usage(-msg  => "Syntax error.", -exitval => 2, -verbose => 0);

           pod2usage(-message => "Syntax error.",
                     -exitval => 2,
                     -verbose => 0,
                     -output  => \*STDERR);

       Each  of  the  following invocations of "pod2usage()" will print the "SYNOPSIS" section and any "OPTIONS"
       and/or "ARGUMENTS" sections to "STDOUT" and will exit with a status of 1:

           pod2usage(1);

           pod2usage(-verbose => 1);

           pod2usage(-exitval => 1);

           pod2usage({-exitval => 1, -output => \*STDOUT});

           pod2usage({-verbose => 1, -output => \*STDOUT});

           pod2usage(-exitval => 1, -verbose => 1);

           pod2usage(-exitval => 1, -verbose => 1, -output => \*STDOUT});

       Each of the following invocations of "pod2usage()" will print the entire manual page to "STDOUT" and will
       exit with a status of 1:

           pod2usage(-verbose  => 2);

           pod2usage({-verbose => 2, -output => \*STDOUT});

           pod2usage(-exitval  => 1, -verbose => 2);

           pod2usage({-exitval => 1, -verbose => 2, -output => \*STDOUT});

   Recommended Use
       Most scripts should print some type of usage message to "STDERR" when a  command  line  syntax  error  is
       detected. They should also provide an option (usually "-H" or "-help") to print a (possibly more verbose)
       usage  message  to  "STDOUT".  Some  scripts may even wish to go so far as to provide a means of printing
       their complete documentation to "STDOUT" (perhaps by allowing a "-man" option).  The  following  complete
       example uses Pod::Usage in combination with Getopt::Long to do all of these things:

           use strict;
           use Getopt::Long qw(GetOptions);
           use Pod::Usage qw(pod2usage);

           my $man = 0;
           my $help = 0;
           ## Parse options and print usage if there is a syntax error,
           ## or if usage was explicitly requested.
           GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
           pod2usage(1) if $help;
           pod2usage(-verbose => 2) if $man;

           ## If no arguments were given, then allow STDIN to be used only
           ## if it's not connected to a terminal (otherwise print usage)
           pod2usage("$0: No files given.")  if ((@ARGV == 0) && (-t STDIN));

           __END__

           =head1 NAME

           sample - Using GetOpt::Long and Pod::Usage

           =head1 SYNOPSIS

           sample [options] [file ...]

            Options:
              -help            brief help message
              -man             full documentation

           =head1 OPTIONS

           =over 4

           =item B<-help>

           Print a brief help message and exits.

           =item B<-man>

           Prints the manual page and exits.

           =back

           =head1 DESCRIPTION

           B<This program> will read the given input file(s) and do something
           useful with the contents thereof.

           =cut

CAVEATS

       By default, pod2usage() will use $0 as the path to the pod input file.  Unfortunately, not all systems on
       which  Perl  runs will set $0 properly (although if $0 isn't found, pod2usage() will search $ENV{PATH} or
       else the list specified by the "-pathlist" option).  If this is the case for your system, you may need to
       explicitly specify the path to the pod docs for the  invoking  script  using  something  similar  to  the
       following:

           pod2usage(-exitval => 2, -input => "/path/to/your/pod/docs");

       In  the  pathological  case that a script is called via a relative path and the script itself changes the
       current working directory (see "chdir" in perlfunc) before calling pod2usage, Pod::Usage will  fail  even
       on robust platforms. Don't do that. Or use FindBin to locate the script:

           use FindBin;
           pod2usage(-input => $FindBin::Bin . "/" . $FindBin::Script);

AUTHOR

       Please report bugs using <http://rt.cpan.org>.

       Marek Rouchal <marekr@cpan.org>

       Brad Appleton <bradapp@enteract.com>

       Based on code for Pod::Text::pod2text() written by Tom Christiansen <tchrist@mox.perl.com>

ACKNOWLEDGMENTS

       rjbs for refactoring Pod::Usage to not use Pod::Parser any more.

       Steven McDougall <swmcd@world.std.com> for his help and patience with re-writing this manpage.