Provided by: ocaml-nox_4.02.3-5ubuntu2_amd64 
NAME
Scanf - Formatted input functions.
Module
Module Scanf
Documentation
Module Scanf
: sig end
Formatted input functions.
=== Introduction ===
=== Introduction ===
=== Functional input with format strings ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== A simple example ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== A simple example ===
=== As suggested above, the expression bscanf ic %d f reads a decimal integer n from the source of
characters ic and returns f n. For instance, - if we use stdin as the source of characters
(Scanf.Scanning.stdin is the predefined formatted input channel that reads from standard input), - if we
define the receiver f as let f x = x + 1, then bscanf Scanning.stdin %d f reads an integer n from the
standard input and returns f n (that is n + 1). Thus, if we evaluate bscanf stdin %d f, and then enter 41
at the keyboard, we get 42 as the final result. ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== A simple example ===
=== As suggested above, the expression bscanf ic %d f reads a decimal integer n from the source of
characters ic and returns f n. For instance, - if we use stdin as the source of characters
(Scanf.Scanning.stdin is the predefined formatted input channel that reads from standard input), - if we
define the receiver f as let f x = x + 1, then bscanf Scanning.stdin %d f reads an integer n from the
standard input and returns f n (that is n + 1). Thus, if we evaluate bscanf stdin %d f, and then enter 41
at the keyboard, we get 42 as the final result. ===
=== Formatted input as a functional feature ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== A simple example ===
=== As suggested above, the expression bscanf ic %d f reads a decimal integer n from the source of
characters ic and returns f n. For instance, - if we use stdin as the source of characters
(Scanf.Scanning.stdin is the predefined formatted input channel that reads from standard input), - if we
define the receiver f as let f x = x + 1, then bscanf Scanning.stdin %d f reads an integer n from the
standard input and returns f n (that is n + 1). Thus, if we evaluate bscanf stdin %d f, and then enter 41
at the keyboard, we get 42 as the final result. ===
=== Formatted input as a functional feature ===
=== The OCaml scanning facility is reminiscent of the corresponding C feature. However, it is also
largely different, simpler, and yet more powerful: the formatted input functions are higher-order
functionals and the parameter passing mechanism is just the regular function application not the variable
assignment based mechanism which is typical for formatted input in imperative languages; the OCaml format
strings also feature useful additions to easily define complex tokens; as expected within a functional
programming language, the formatted input functions also support polymorphism, in particular arbitrary
interaction with polymorphic user-defined scanners. Furthermore, the OCaml formatted input facility is
fully type-checked at compile time. ===
=== Introduction ===
=== Functional input with format strings ===
=== The module Scanf provides formatted input functions or scanners. The formatted input functions can
read from any kind of input, including strings, files, or anything that can return characters. The more
general source of characters is named a formatted input channel (or scanning buffer) and has type
Scanf.Scanning.in_channel. The more general formatted input function reads from any scanning buffer and
is named bscanf. Generally speaking, the formatted input functions have 3 arguments: - the first
argument is a source of characters for the input, - the second argument is a format string that specifies
the values to read, - the third argument is a receiver function that is applied to the values read.
Hence, a typical call to the formatted input function Scanf.bscanf is bscanf ic fmt f, where: - ic is a
source of characters (typically a formatted input channel with type Scanf.Scanning.in_channel), - fmt is
a format string (the same format strings as those used to print material with module Printf or Format), -
f is a function that has as many arguments as the number of values to read in the input. ===
=== A simple example ===
=== As suggested above, the expression bscanf ic %d f reads a decimal integer n from the source of
characters ic and returns f n. For instance, - if we use stdin as the source of characters
(Scanf.Scanning.stdin is the predefined formatted input channel that reads from standard input), - if we
define the receiver f as let f x = x + 1, then bscanf Scanning.stdin %d f reads an integer n from the
standard input and returns f n (that is n + 1). Thus, if we evaluate bscanf stdin %d f, and then enter 41
at the keyboard, we get 42 as the final result. ===
=== Formatted input as a functional feature ===
=== The OCaml scanning facility is reminiscent of the corresponding C feature. However, it is also
largely different, simpler, and yet more powerful: the formatted input functions are higher-order
functionals and the parameter passing mechanism is just the regular function application not the variable
assignment based mechanism which is typical for formatted input in imperative languages; the OCaml format
strings also feature useful additions to easily define complex tokens; as expected within a functional
programming language, the formatted input functions also support polymorphism, in particular arbitrary
interaction with polymorphic user-defined scanners. Furthermore, the OCaml formatted input facility is
fully type-checked at compile time. ===
=== Formatted input channel ===
module Scanning : sig end
=== Type of formatted input functions ===
type ('a, 'b, 'c, 'd) scanner = ('a, Scanning.in_channel, 'b, 'c, 'a -> 'd, 'd) Pervasives.format6 -> 'c
The type of formatted input scanners: ('a, 'b, 'c, 'd) scanner is the type of a formatted input function
that reads from some formatted input channel according to some format string; more precisely, if scan is
some formatted input function, then scan ic fmt f applies f to the arguments specified by the format
string fmt , when scan has read those arguments from the formatted input channel ic .
For instance, the scanf function below has type ('a, 'b, 'c, 'd) scanner , since it is a formatted input
function that reads from Scanning.stdin : scanf fmt f applies f to the arguments specified by fmt ,
reading those arguments from Pervasives.stdin as expected.
If the format fmt has some %r indications, the corresponding input functions must be provided before the
receiver f argument. For instance, if read_elem is an input function for values of type t , then bscanf
ic %r; read_elem f reads a value v of type t followed by a ';' character, and returns f v .
Since 3.10.0
exception Scan_failure of string
The exception that formatted input functions raise when the input cannot be read according to the given
format.
=== The general formatted input function ===
val bscanf : Scanning.in_channel -> ('a, 'b, 'c, 'd) scanner
bscanf ic fmt r1 ... rN f reads arguments for the function f , from the formatted input channel ic ,
according to the format string fmt , and applies f to these values. The result of this call to f is
returned as the result of the entire bscanf call. For instance, if f is the function fun s i -> i + 1 ,
then Scanf.sscanf x= 1 %s = %i f returns 2 .
Arguments r1 to rN are user-defined input functions that read the argument corresponding to the %r
conversions specified in the format string.
=== Format string description ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Scanning indications in format strings ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Scanning indications in format strings ===
=== Scanning indications appear just after the string conversions %s and %[ range ] to delimit the end of
the token. A scanning indication is introduced by a @ character, followed by some plain character c. It
means that the string token should end just before the next matching c (which is skipped). If no c
character is encountered, the string token spreads as much as possible. For instance, %s@\t reads a
string up to the next tab character or to the end of input. If a @ character appears anywhere else in the
format string, it is treated as a plain character. Note: - As usual in format strings, % and @
characters must be escaped using %% and %@; this rule still holds within range specifications and
scanning indications. For instance, %s@%% reads a string up to the next % character. - The scanning
indications introduce slight differences in the syntax of Scanf format strings, compared to those used
for the Printf module. However, the scanning indications are similar to those used in the Format module;
hence, when producing formatted text to be scanned by !Scanf.bscanf, it is wise to use printing functions
from the Format module (or, if you need to use functions from Printf, banish or carefully double check
the format strings that contain '@' characters). ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Scanning indications in format strings ===
=== Scanning indications appear just after the string conversions %s and %[ range ] to delimit the end of
the token. A scanning indication is introduced by a @ character, followed by some plain character c. It
means that the string token should end just before the next matching c (which is skipped). If no c
character is encountered, the string token spreads as much as possible. For instance, %s@\t reads a
string up to the next tab character or to the end of input. If a @ character appears anywhere else in the
format string, it is treated as a plain character. Note: - As usual in format strings, % and @
characters must be escaped using %% and %@; this rule still holds within range specifications and
scanning indications. For instance, %s@%% reads a string up to the next % character. - The scanning
indications introduce slight differences in the syntax of Scanf format strings, compared to those used
for the Printf module. However, the scanning indications are similar to those used in the Format module;
hence, when producing formatted text to be scanned by !Scanf.bscanf, it is wise to use printing functions
from the Format module (or, if you need to use functions from Printf, banish or carefully double check
the format strings that contain '@' characters). ===
=== Exceptions during scanning ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Scanning indications in format strings ===
=== Scanning indications appear just after the string conversions %s and %[ range ] to delimit the end of
the token. A scanning indication is introduced by a @ character, followed by some plain character c. It
means that the string token should end just before the next matching c (which is skipped). If no c
character is encountered, the string token spreads as much as possible. For instance, %s@\t reads a
string up to the next tab character or to the end of input. If a @ character appears anywhere else in the
format string, it is treated as a plain character. Note: - As usual in format strings, % and @
characters must be escaped using %% and %@; this rule still holds within range specifications and
scanning indications. For instance, %s@%% reads a string up to the next % character. - The scanning
indications introduce slight differences in the syntax of Scanf format strings, compared to those used
for the Printf module. However, the scanning indications are similar to those used in the Format module;
hence, when producing formatted text to be scanned by !Scanf.bscanf, it is wise to use printing functions
from the Format module (or, if you need to use functions from Printf, banish or carefully double check
the format strings that contain '@' characters). ===
=== Exceptions during scanning ===
=== Scanners may raise the following exceptions when the input cannot be read according to the format
string: - Raise Scanf.Scan_failure if the input does not match the format. - Raise Failure if a
conversion to a number is not possible. - Raise End_of_file if the end of input is encountered while
some more characters are needed to read the current conversion specification. - Raise Invalid_argument
if the format string is invalid. Note: - as a consequence, scanning a %s conversion never raises
exception End_of_file: if the end of input is reached the conversion succeeds and simply returns the
characters read so far, or if none were ever read. ===
=== Format string description ===
=== The format string is a character string which contains three types of objects: - plain characters,
which are simply matched with the characters of the input (with a special case for space and line feed,
see Scanf.space), - conversion specifications, each of which causes reading and conversion of one
argument for the function f (see Scanf.conversion), - scanning indications to specify boundaries of
tokens (see scanning Scanf.indication). ===
=== The space character in format strings ===
=== As mentioned above, a plain character in the format string is just matched with the next character of
the input; however, two characters are special exceptions to this rule: the space character (' ' or ASCII
code 32) and the line feed character ('\n' or ASCII code 10). A space does not match a single space
character, but any amount of 'whitespace' in the input. More precisely, a space inside the format string
matches any number of tab, space, line feed and carriage return characters. Similarly, a line feed
character in the format string matches either a single line feed or a carriage return followed by a line
feed. Matching any amount of whitespace, a space in the format string also matches no amount of
whitespace at all; hence, the call bscanf ib Price = %d $ (fun p -> p) succeeds and returns 1 when
reading an input with various whitespace in it, such as Price = 1 $, Price = 1 $, or even Price=1$. ===
=== Conversion specifications in format strings ===
=== Conversion specifications consist in the % character, followed by an optional flag, an optional field
width, and followed by one or two conversion characters. The conversion characters and their meanings
are: - d: reads an optionally signed decimal integer. - i: reads an optionally signed integer (usual
input conventions for decimal (0-9+), hexadecimal (0x[0-9a-f]+ and 0X[0-9A-F]+), octal (0o[0-7]+), and
binary (0b[0-1]+) notations are understood). - u: reads an unsigned decimal integer. - x or X: reads an
unsigned hexadecimal integer ([0-9a-fA-F]+). - o: reads an unsigned octal integer ([0-7]+). - s: reads
a string argument that spreads as much as possible, until the following bounding condition holds: - a
whitespace has been found (see Scanf.space), - a scanning indication (see scanning Scanf.indication) has
been encountered, - the end-of-input has been reached. Hence, this conversion always succeeds: it
returns an empty string if the bounding condition holds when the scan begins. - S: reads a delimited
string argument (delimiters and special escaped characters follow the lexical conventions of OCaml). -
c: reads a single character. To test the current input character without reading it, specify a null field
width, i.e. use specification %0c. Raise Invalid_argument, if the field width specification is greater
than 1. - C: reads a single delimited character (delimiters and special escaped characters follow the
lexical conventions of OCaml). - f, e, E, g, G: reads an optionally signed floating-point number in
decimal notation, in the style dddd.ddd e/E+-dd. - F: reads a floating point number according to the
lexical conventions of OCaml (hence the decimal point is mandatory if the exponent part is not
mentioned). - B: reads a boolean argument (true or false). - b: reads a boolean argument (for backward
compatibility; do not use in new programs). - ld, li, lu, lx, lX, lo: reads an int32 argument to the
format specified by the second letter for regular integers. - nd, ni, nu, nx, nX, no: reads a nativeint
argument to the format specified by the second letter for regular integers. - Ld, Li, Lu, Lx, LX, Lo:
reads an int64 argument to the format specified by the second letter for regular integers. - [ range ]:
reads characters that matches one of the characters mentioned in the range of characters range (or not
mentioned in it, if the range starts with ^). Reads a string that can be empty, if the next input
character does not match the range. The set of characters from c1 to c2 (inclusively) is denoted by
c1-c2. Hence, %[0-9] returns a string representing a decimal number or an empty string if no decimal
digit is found; similarly, %[0-9a-f] returns a string of hexadecimal digits. If a closing bracket
appears in a range, it must occur as the first character of the range (or just after the ^ in case of
range negation); hence []] matches a ] character and [^]] matches any character that is not ]. Use %%
and %@ to include a % or a @ in a range. - r: user-defined reader. Takes the next ri formatted input
function and applies it to the scanning buffer ib to read the next argument. The input function ri must
therefore have type Scanning.in_channel -> 'a and the argument read has type 'a. - { fmt %}: reads a
format string argument. The format string read must have the same type as the format string specification
fmt. For instance, %{ %i %} reads any format string that can read a value of type int; hence, if s is the
string fmt:\ number is %u\"", then Scanf.sscanf s fmt: %{%i%} succeeds and returns the format string
number is %u . - ( fmt %): scanning sub-format substitution. Reads a format string rf in the input,
then goes on scanning with rf instead of scanning with fmt. The format string rf must have the same type
as the format string specification fmt that it replaces. For instance, %( %i %) reads any format string
that can read a value of type int. The conversion returns the format string read rf, and then a value
read using rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s %(%i%) (fun fmt i -> fmt,
i) evaluates to ("%4d", 1234). This behaviour is not mere format substitution, since the conversion
returns the format string read as additional argument. If you need pure format substitution, use special
flag _ to discard the extraneous argument: conversion %_( fmt %) reads a format string rf and then
behaves the same as format string rf. Hence, if s is the string \ %4d\"1234.00", then Scanf.sscanf s
%_(%i%) is simply equivalent to Scanf.sscanf 1234.00 %4d . - l: returns the number of lines read so far.
- n: returns the number of characters read so far. - N or L: returns the number of tokens read so far.
- !: matches the end of input condition. - %: matches one % character in the input. - @: matches one @
character in the input. - ,: does nothing. Following the % character that introduces a conversion,
there may be the special flag _: the conversion that follows occurs as usual, but the resulting value is
discarded. For instance, if f is the function fun i -> i + 1, and s is the string x = 1 , then
Scanf.sscanf s %_s = %i f returns 2. The field width is composed of an optional integer literal
indicating the maximal width of the token to read. For instance, %6d reads an integer, having at most 6
decimal digits; %4f reads a float with at most 4 characters; and %8[\000-\255] returns the next 8
characters (or all the characters still available, if fewer than 8 characters are available in the
input). Notes: - as mentioned above, a %s conversion always succeeds, even if there is nothing to read
in the input: in this case, it simply returns . - in addition to the relevant digits, '_' characters
may appear inside numbers (this is reminiscent to the usual OCaml lexical conventions). If stricter
scanning is desired, use the range conversion facility instead of the number conversions. - the scanf
facility is not intended for heavy duty lexical analysis and parsing. If it appears not expressive enough
for your needs, several alternative exists: regular expressions (module Str), stream parsers,
ocamllex-generated lexers, ocamlyacc-generated parsers. ===
=== Scanning indications in format strings ===
=== Scanning indications appear just after the string conversions %s and %[ range ] to delimit the end of
the token. A scanning indication is introduced by a @ character, followed by some plain character c. It
means that the string token should end just before the next matching c (which is skipped). If no c
character is encountered, the string token spreads as much as possible. For instance, %s@\t reads a
string up to the next tab character or to the end of input. If a @ character appears anywhere else in the
format string, it is treated as a plain character. Note: - As usual in format strings, % and @
characters must be escaped using %% and %@; this rule still holds within range specifications and
scanning indications. For instance, %s@%% reads a string up to the next % character. - The scanning
indications introduce slight differences in the syntax of Scanf format strings, compared to those used
for the Printf module. However, the scanning indications are similar to those used in the Format module;
hence, when producing formatted text to be scanned by !Scanf.bscanf, it is wise to use printing functions
from the Format module (or, if you need to use functions from Printf, banish or carefully double check
the format strings that contain '@' characters). ===
=== Exceptions during scanning ===
=== Scanners may raise the following exceptions when the input cannot be read according to the format
string: - Raise Scanf.Scan_failure if the input does not match the format. - Raise Failure if a
conversion to a number is not possible. - Raise End_of_file if the end of input is encountered while
some more characters are needed to read the current conversion specification. - Raise Invalid_argument
if the format string is invalid. Note: - as a consequence, scanning a %s conversion never raises
exception End_of_file: if the end of input is reached the conversion succeeds and simply returns the
characters read so far, or if none were ever read. ===
=== Specialised formatted input functions ===
val fscanf : Pervasives.in_channel -> ('a, 'b, 'c, 'd) scanner
Same as Scanf.bscanf , but reads from the given regular input channel.
Warning: since all formatted input functions operate from a formatted input channel, be aware that each
fscanf invocation will operate with a formatted input channel reading from the given channel. This extra
level of bufferization can lead to a strange scanning behaviour if you use low level primitives on the
channel (reading characters, seeking the reading position, and so on).
As a consequence, never mix direct low level reading and high level scanning from the same regular input
channel.
val sscanf : string -> ('a, 'b, 'c, 'd) scanner
Same as Scanf.bscanf , but reads from the given string.
val scanf : ('a, 'b, 'c, 'd) scanner
Same as Scanf.bscanf , but reads from the predefined formatted input channel Scanf.Scanning.stdin that is
connected to Pervasives.stdin .
val kscanf : Scanning.in_channel -> (Scanning.in_channel -> exn -> 'd) -> ('a, 'b, 'c, 'd) scanner
Same as Scanf.bscanf , but takes an additional function argument ef that is called in case of error: if
the scanning process or some conversion fails, the scanning function aborts and calls the error handling
function ef with the formatted input channel and the exception that aborted the scanning process as
arguments.
val ksscanf : string -> (Scanning.in_channel -> exn -> 'd) -> ('a, 'b, 'c, 'd) scanner
Same as Scanf.kscanf but reads from the given string.
Since 4.02.0
val kfscanf : Pervasives.in_channel -> (Scanning.in_channel -> exn -> 'd) -> ('a, 'b, 'c, 'd) scanner
Same as Scanf.kscanf , but reads from the given regular input channel.
Since 4.02.0
=== Reading format strings from input ===
val bscanf_format : Scanning.in_channel -> ('a, 'b, 'c, 'd, 'e, 'f) Pervasives.format6 -> (('a, 'b, 'c,
'd, 'e, 'f) Pervasives.format6 -> 'g) -> 'g
bscanf_format ic fmt f reads a format string token from the formatted input channel ic , according to the
given format string fmt , and applies f to the resulting format string value. Raise Scan_failure if the
format string value read does not have the same type as fmt .
Since 3.09.0
val sscanf_format : string -> ('a, 'b, 'c, 'd, 'e, 'f) Pervasives.format6 -> (('a, 'b, 'c, 'd, 'e, 'f)
Pervasives.format6 -> 'g) -> 'g
Same as Scanf.bscanf_format , but reads from the given string.
Since 3.09.0
val format_from_string : string -> ('a, 'b, 'c, 'd, 'e, 'f) Pervasives.format6 -> ('a, 'b, 'c, 'd, 'e,
'f) Pervasives.format6
format_from_string s fmt converts a string argument to a format string, according to the given format
string fmt . Raise Scan_failure if s , considered as a format string, does not have the same type as fmt
.
Since 3.10.0
val unescaped : string -> string
Return a copy of the argument with escape sequences, following the lexical conventions of OCaml, replaced
by their corresponding special characters. If there is no escape sequence in the argument, still return a
copy, contrary to String.escaped.
Since 4.00.0
2016-02-07 source: Scanf(3o)