Provided by: interchange_5.7.7-2_amd64 
NAME
Vend::Payment::Skipjack - Interchange Skipjack Support
SYNOPSIS
&charge=skipjack
or
[charge mode=skipjack param1=value1 param2=value2]
PREREQUISITES
Net::SSLeay
or
LWP::UserAgent and Crypt::SSLeay
Only one of these need be present and working.
DESCRIPTION
The Vend::Payment::Skipjack module implements the skipjack() routine for using Skipjack IC payment
services with Interchange. It is compatible on a call level with the other Interchange payment modules.
To enable this module, place this directive in "interchange.cfg":
Require module Vend::Payment::Skipjack
This must be in interchange.cfg or a file included from it.
NOTE: Make sure CreditCardAuto is off (default in Interchange demos).
The mode can be named anything, but the "gateway" parameter must be set to "skipjack". To make it the
default payment gateway for all credit card transactions in a specific catalog, you can set in
"catalog.cfg":
Variable MV_PAYMENT_MODE skipjack
It uses several of the standard settings from Interchange payment. Any time we speak of a setting, it is
obtained either first from the tag/call options, then from an Interchange order Route named for the mode,
then finally a default global payment variable, For example, the "id" parameter would be specified by:
[charge mode=skipjack id=YourSkipjackID]
or
Route skipjack id YourSkipjackID
or with only Skipjack as a payment provider
Variable MV_PAYMENT_ID YourskipjackID
A fully valid catalog.cfg entry to work with the standard demo would be:
Variable MV_PAYMENT_MODE skipjack
Route skipjack id YourSkipjackID
Route skipjack vendor YourSkipjackVendor
The active settings are:
id Your account ID number, supplied by Skipjack when you sign up. Use the supplied HTML Serial Numbers
(Nova or Vital) while testing in development mode. Global parameter is MV_PAYMENT_ID.
vendor
The developer ID of the system which interfaces with Skipjack. Global parameter is
MV_PAYMENT_VENDOR.
transaction
The type of transaction to be run. Valid values are:
Interchange Skipjack
---------------- -----------------
sale sale
recurring recurring
Default is "sale".
If you wish to do a recurring charge, you will have to ensure that the following Interchange values
are set properly:
Interchange variable Skipjack variable
-------------------- -----------------
recurring_item rtItemNumber
recurring_desc rtItemDescription
recurring_start_date rtStartingDate
recurring_frequency rtFrequency
recurring_transactions rtTotalTransactions
recurring_comment rtComment
test
If you set the "test" parameter, Interchange will remap some values and the URL for the transaction
to point to the Skipjack test server. It will return a valid transaction if all is working.
generate_error
To generate errors in test mode only, set the parameter "generate_error" to one of the following
values (error it generates in parenthesese):
number (invalid credit card number)
avs (will succeed, but generate AVS message)
exp (expired card)
id (invalid Skipjack account?)
vendor (invalid vendor?)
The following should rarely be used, as the supplied defaults are usually correct.
remap
This remaps the form variable names to the ones needed by Skipjack. See the "Payment Settings"
heading in the Interchange documentation for use.
submit_url
The Skipjack URL to submit to. Default is:
https://www.skipjackic.com/scripts/evolvcc.dll?Authorize
Add the following to catalog.cfg while in development mode:
Route skipjack submit_url 'https://developer.skipjackic.com/scripts/evolvcc.dll?Authorize'
Troubleshooting
Try the instructions above, then enable test mode:
Route skipjack test 1
A test order should complete.
Then set a generate error
Route skipjack test 1
Route skipjack generate_error number
and try a sale. The sale should be denied, and the reason should be in [data session payment_error].
If nothing works:
• Make sure you "Require"d the module in interchange.cfg:
Require module Vend::Payment::Skipjack
• Make sure either Net::SSLeay or Crypt::SSLeay and LWP::UserAgent are installed and working. You can
test to see whether your Perl thinks they are:
perl -MNet::SSLeay -e 'print "It works\n"'
or
perl -MLWP::UserAgent -MCrypt::SSLeay -e 'print "It works\n"'
If either one prints "It works." and returns to the prompt you should be OK (presuming they are in
working order otherwise).
• Check the error logs, both catalog and global.
• Make sure you set your account ID properly.
• Try an order, then put this code in a page:
<XMP>
[calc]
my $string = $Tag->uneval( { ref => $Session->{payment_result} });
$string =~ s/{/{\n/;
$string =~ s/,/,\n/g;
return $string;
[/calc]
</XMP>
That should show what happened.
• If all else fails, consultants are available to help with integration for a fee. See
http://www.icdevgroup.org/
BUGS
There is actually nothing *in* Vend::Payment::Skipjack. It changes packages to Vend::Payment and places
things there.
AUTHORS
Originally developed by New York Connect Net (http://nyct.net) Michael Bacarella <mbac@nyct.net>
Modified for GetCareer.com by Slipstream.com by Troy Davis <troy@slipstream.com>
LWP/Crypt::SSLeay interface code by Matthew Schick, <mschick@brightredproductions.com>.
Interchange implementation by Mike Heins.
perl v5.14.2 2011-03-09 Vend::Payment::Skipjack(3pm)