Provided by: gridengine-drmaa-dev_6.2u5-7.4_amd64 
NAME
jsv_is_param, jsv_get_param, jsv_add_param, jsv_mod_param, jsv_del_param, jsv_sub_is_param,
jsv_sub_get_param, jsv_sub_add_param, jsv_sub_del_param, jsv_is_env, jsv_get_env, jsv_add_env,
jsv_mod_env, jsv_del_env, jsv_accept, jsv_correct, jsv_reject, jsv_reject_wait, jsv_show_params,
jsv_show_envs, jsv_log_info, jsv_log_warning, jsv_log_error, jsv_main - Sun Grid Engine Job Submission
Verifier Scripting Interface
SYNOPSIS
jsv_clear_params();
jsv_is_param(param_name);
jsv_get_param(param_name);
jsv_set_param(param_name, param_value);
jsv_del_param(param_name);
jsv_sub_is_param(param_name, variable_name);
jsv_sub_get_param(param_name, variable_name);
jsv_sub_add_param(param_name, variable_name, variable_value);
jsv_sub_del_param(param_name, variable_name);
jsv_clear_envs();
jsv_is_env(variable_name);
jsv_get_env(variable_name);
jsv_add_env(variable_name, variable_value);
jsv_mod_env(variable_name, variable_value);
jsv_del_env(variable_name);
jsv_accept(message);
jsv_correct(message);
jsv_reject(message);
jsv_reject_wait(message);
jsv_show_params();
jsv_show_envs();
jsv_log_info(message);
jsv_log_warning(message);
jsv_log_error(message);
jsv_main();
jsv_send_env();
jsv_on_start();
jsv_on_verify();
DESCRIPTION
The functions documented here implement the server side of the JSV protocol as it is described in the man
page jsv(1). These script functions are available in Bourne shell, TCL or Perl scripts after
sourcing/including the files jsv_inlcude.sh, jsv_include.tcl or JSV.pm. The files and corresponding JSV
script templates are located in the directory $SGE_ROOT/util/resources/jsv.
jsv_clear_params()
This function clears all received job parameters that were stored during the last job verification
process.
jsv_clear_envs()
This function clears all received job environment variables that were stored during the last job
verification process.
jsv_show_params()
A call of this function reports all known job parameters to the counterpart of this script (client or
master daemon thread). This parameters will be reported as info messages and appear either in the stdout
stream of the client or in the message file of the master process.
jsv_show_envs()
A call of this function reports all known job environment variables to the counterpart of this script
(client or master daemon thread). They will be reported as info messages and appear in the stdout stream
of the client or in the message file of the master process.
jsv_is_param()
This function returns whether or not a specific job parameters is available for the job which is
currently being verified. Either the string true or false will be returned. The availability/absence of a
job parameter does not mean that the corresponding command line switch was used/not used.
The following values are allowed for param_name. Corresponding qsub/qrsh/qsh/... switches next to the
parameter name are mentioned only if they are different from the command line switches.
Find additional information in qsub(1) man page describing the availability and value format. Job
parameters written in capital letters are pseudo parameters. A detailed description for them can be found
in jsv(1)
param_name command line switch/description
a
ac combination of -ac, -sc, -dc
ar
A
b
c
ckpt
cwd
display
dl
e
h
hold_jid
hold_jid_ad
i
l_hard -l or -hard followed by -l
l_soft -soft followed by -l
j
js
m
M
masterq
N
notify
now
N
o
ot
P
pe
q_hard -q or -hard followed by -q
q_soft -soft followed by -q
R
r
shell
S
t
w
wd
CLIENT
CONTEXT
GROUP
VERSION
JOB_ID
SCRIPT
CMDARGS
CMDARG<i> where <i> is a nonnegative number
USER
The function returns the string true if the parameter (param_name) exists in the job currently being
verified. If it does not exist false will be returned.
jsv_get_param()
This function returns the value of a specific job parameter (param_name).
This value is only available if the function jsv_is_param() returns true. Otherwise an empty string is
returned.
Find a list of allowed parameter names in the section for the function jsv_is_param().
jsv_set_param()
This function changes the job parameter (param_name) to the value param_value.
If param_value is an empty string then the corresponding job parameter will be deleted similar to the
function jsv_del_param(). As a result the job parameter is not available as if the corresponding command
line switch was not specified during job submission.
For boolean parameters that only accept the values yes or no it is not allowed to pass an empty string as
param_value.
Also for the parameters c and m it is not allowed to use empty strings. Details can be found in qsub(1).
jsv_del_param()
This function deletes the job parameter param_name.
Find a list of allowed parameter names in the section for the function jsv_is_param().
jsv_sub_is_param()
Some job parameters are lists that can contain multiple variables with an optional value.
This function returns true if a job parameters list contains a variable and false otherwise. false might
also indicate that the parameter list itself is not available. Use the function jsv_is_param() to check
if the parameter list is not available.
The following parameters are list parameters. The second columns describes corresponding variable names
to be used. The third column contains a dash (-) if there is no value (variable_value) allowed when the
functions jsv_sub_add_param() or it indicated that jsv_sub_get_param() will return always an empty
string. A question mark (?) shows that the value is optional.
param_name variable_name variable_value
ac job context variable name
hold_jid job identifier -
l_hard complex attribute name ?
l_soft complex attribute name ?
M mail address -
masterq cluster queue name or -
queue instance name
q_hard cluster queue name or -
queue instance name
q_soft cluster queue name or -
queue instance name
jsv_sub_get_param()
Some job parameters are lists that can contain multiple variables with an optional value.
This function returns the value of a variable (variable_name). For sub list elements that have no value
an empty string will be returned.
Find a list of allowed parameter names (param_name) and variable names (variable_name) in the section for
the function jsv_sub_is_param().
jsv_sub_add_param()
Some job parameters are list that can contain multiple variables with an optional value.
This function either adds a new variable with a new value or it modifies the value if the variable is
already in the list parameter. variable_value is optional. In that case, the variable has no value.
Find a list of allowed parameter names (param_name) and variable names (variable_name) in the section for
the function jsv_sub_is_param().
jsv_sub_del_param()
Some job parameters are lists which can contain multiple variables with an optional value.
This function deletes a variable (variable_name) and if available the corresponding value. If
(variable_name) is not available in the job parameter then the command will be ignored.
Find a list of allowed parameter names (param_name) and variable names (variable_name ) in the section
for the function jsv_sub_is_param().
jsv_is_env()
If the function returns true, then the job environment variable with the name variable_name exists in the
job currently being verified and jsv_get_env() can be used to retrieve the value of that variable. If
the function returns false, then the job environment variable (variable_name) does not exist.
jsv_get_env()
This function returns the value of a job environment variable (variable_name).
This variable has to be passed with the qsub command line switch -v or -V and it has to be enabled that
environment variable data is passed to JSV scripts. Environment variable data is passed when the function
jsv_send_env() is called in the callback function jsv_on_start().
If the variable does not exist or if environment variable information is not available then an empty
string will be returned.
jsv_add_env()
This function adds an additional environment variable to the set of variables that will exported to the
job, when it is started. As a result the variable_name and variable_value become available, as if the -v
or -V was specified during job submission.
variable_value is optional. If there is an empty string passed then the variable is defined without
value.
If variable_name already exists in the set of job environment variables, then the corresponding value
will be replaced by variable_value, as if the function jsv_mod_env() was used. If an empty string is
passed then the old value will be deleted.
To delete a environment variable the function jsv_del_env() has to be used.
jsv_mod_env()
This function modifies an existing environment variable that is in the set of variables which will
exported to the job, when it is started. As a result, the variable_name and variable_value will be
available as if the -v or -V was specified during job submission.
variable_value is optional. If there is an empty string passed then the variable is defined without
value.
If variable_name does not already exist in the set of job environment variables, then the corresponding
name and value will be added as if the function jsv_add_env() was used.
To delete a environment variable, use the function jsv_del_env().
jsv_del_env()
This function removes a job environment variable (variable_name) from the set of variables that will be
exported to the job, when it is started.
If variable_name does not already exists in the set of job environment variables then the command is
ignored.
To change the value of a variable use the function jsv_mod_env() to add a new value, call the function
jsv_add_env().
jsv_accept()
This function can only be used in jsv_on_verify(). After it has been called, the function jsv_on_verify()
has to return immediately.
A call to this function indicates that the job that is currently being verified should be accepted as it
was initially provided. All job modifications that might have been applied in jsv_on_verify() before
this function was called, are then ignored.
Instead of calling jsv_accept() in jsv_on_verify() also the functions jsv_correct(), jsv_reject() or
jsv_reject_wait() can be called, but only one of these functions can be used at a time.
jsv_correct()
This function can only be used in jsv_on_verify(). After it has been called, the function jsv_on_verify()
has to return immediately.
A call to this function indicates that the job that is currently being verified has to be modified before
it can be accepted. All job parameter modifications that were previously applied will be committed and
the job will be accepted. "Accept" in that case means that the job will either be passed to the next JSV
instance for modification or that it is passed to that component in the master daemon that adds it to the
master data store when the last JSV instance has verified the job.
Instead of calling jsv_correct() in jsv_on_verify(), the functions jsv_accept(), jsv_reject() or
jsv_reject_wait() can be called, but only one of these functions can be used.
jsv_reject()
This function can only be used in jsv_on_verify(). After it has been called the function jsv_on_verify()
has to return immediately.
The job that is currently being verified will be rejected. message will be passed to the client
application that tried to submit the job. Commandline clients like qsub will print that message to stdout
to inform the user that the submission has failed.
jsv_reject_wait() should be called if the user may try to submit the job again. jsv_reject_wait()
indicates that the verification process might be successful in the future.
Instead of calling jsv_reject() in jsv_on_verify() also the functions jsv_accept(), jsv_correct() or
jsv_reject_wait() can be also called, but only one of these functions can be used.
jsv_reject_wait()
This function can only be used in jsv_on_verify(). After it has been called the function jsv_on_verify()
has to return immediately.
The job which is currently verified will be rejected. message will be passed to the client application,
that tries to submit the job. Commandline clients like qsub will print that message to stdout to inform
the user that the submission has failed.
This function should be called if the user who tries to submit the job might have a chance to submit the
job later. jsv_reject indicates that the verified job will also be rejected in future.
Instead of calling jsv_reject_wait() in jsv_on_verify() the functions jsv_accept(), jsv_correct() or
jsv_reject() can be also called, but only one of these functions can be used.
jsv_log_info()
This function sends an info message to the client or master daemon instance that started the JSV script.
For client JSVs, this means that the command line client will get the information and print it to the
stdout stream. Server JSVs will print that message as an info message to the master daemon message file.
If message is missing then and empty line will be printed.
jsv_log_warning()
This function sends a warning message to the client or master daemon instance that started the JSV
script.
For client JSVs, this means that the command line client will get the information and print it to the
stdout stream. Server JSVs will print that message as an warning message to the master daemon message
file.
If message is missing then and empty line will be printed.
jsv_log_error()
This function sends an error message to the client or master daemon instance that started the JSV script.
For client JSVs, this means that the command line client will get the information and print it to the
stdout stream. Server JSVs will print that message as an error message to the master daemon message file.
If message is missing then and empty line will be printed.
jsv_send_env()
This function can only be used in jsv_on_start(). If it is used there, then the job environment
information will be available in jsv_on_verify() for the next job that is scheduled to be verified.
This function must be called for the functions jsv_show_envs(), jsv_is_env(), jsv_get_env(),
jsv_add_env() and jsv_mod_env() to behave correctly.
Job environments might become very big (10K and more). This will slow down the executing component
(submit client or master daemon thread). For this reason, job environment information is not passed to
JSV scripts by default.
Please note also that the data in the job environment can't be verified by Grid Engine and might
therefore contain data which could be misinterpreted in the script environment and cause security issues.
jsv_main()
This function has to be called an main function in JSV scripts. It implements the JSV protocol and
performs the communication with client and server components which might start JSV scripts.
This function does not return immediately. It returns only when the "QUIT" command is send by the client
or server component.
During the communication with client and server components, this function triggers two callback functions
for each job that should be verified. First jsv_on_start() and later on jsv_on_verify().
jsv_on_start() can be used to initialize certain things that might be needed for the verification
process. jsv_on_verify() does the verification process itself.
The function jsv_send_env() can be called in jsv_on_start() so that the job environment is available in
jsv_on_verify().
The following function can only be used in jsv_on_verify(). Simple job parameters can be
accessed/modified with: jsv_is_param, jsv_get_param, jsv_set_param and jsv_del_param.
List based job parameters can be accessed with: jsv_sub_is_param, jsv_sub_get_param, jsv_sub_add_param
and jsv_sub_del_param
If the environment was requested with jsv_send_env() in jsv_on_start() then the environment can be
accessed/modified with the following commands: jsv_is_env, jsv_get_env, jsv_add_env, jsv_mod_env and
jsv_del_env
Jobs can be accepted/rejected with the following: jsv_accept, jsv_correct, jsv_reject and
jsv_reject_wait.
The following functions send messages to the calling component of a JSV that will either appear on the
stdout stream of the client or in the master message file. This is especially useful when new JSV scripts
should be tested: jsv_show_params, jsv_show_envs, jsv_log_info, jsv_log_warning and jsv_log_error
jsv_on_start()
This is a callback function that has to be defined by the creator of a JSV script. It is called for
every job short time before the verification process of a job starts.
Within this function jsv_send_env can be called to request job environment information for the next job
is scheduled to be verified.
After this function returns jsv_on_verify() will be called. This function does there verification process
itself.
jsv_on_verify()
This is a callback function that has to be defined by the creator of a JSV script. It is called for
every job and when it returns a the job will either be accepted or rejected. Find implementation examples
in the directory $SGE_ROOT/util/resources/jsv.
The logic of this function completely depends on the creator of this function. The creator has only to
take care that one of the functions jsv_accept(), jsv_reject(), jsv_reject_wait() or jsv_correct() is
called before the function returns.
EXAMPLES
Find in the table below the returned values for the "*is*" and "*get*" functions when following job is
submitted:
qsub -l mem=1G,mem2=200M ...
function call returned value
----------------------------- -----------------
jsv_is_param(l_hard) "true"
jsv_get_param(l_hard) "mem=1G,mem2=200M"
jsv_sub_is_param(l_hard,mem) "true"
jsv_sub_get_param(l_hard,mem) "1G"
jsv_sub_get_param(l_hard,mem3) "false"
jsv_sub_get_param(l_hard,mem3) ""
SEE ALSO
sge_intro(1), jsv(1), qalter(1), qlogin(1), qmake(1), qrsh(1), qsh(1), qsub(1), qtcsh(1),
COPYRIGHT
See sge_intro(1) for a full statement of rights and permissions.