Provided by: libpcre3-dev_8.38-3.1_amd64 
NAME
PCRE - Perl-compatible regular expressions
UTF-8, UTF-16, UTF-32, AND UNICODE PROPERTY SUPPORT
As well as UTF-8 support, PCRE also supports UTF-16 (from release 8.30) and UTF-32 (from release 8.32),
by means of two additional libraries. They can be built as well as, or instead of, the 8-bit library.
UTF-8 SUPPORT
In order process UTF-8 strings, you must build PCRE's 8-bit library with UTF support, and, in addition,
you must call pcre_compile() with the PCRE_UTF8 option flag, or the pattern must start with the sequence
(*UTF8) or (*UTF). When either of these is the case, both the pattern and any subject strings that are
matched against it are treated as UTF-8 strings instead of strings of individual 1-byte characters.
UTF-16 AND UTF-32 SUPPORT
In order process UTF-16 or UTF-32 strings, you must build PCRE's 16-bit or 32-bit library with UTF
support, and, in addition, you must call pcre16_compile() or pcre32_compile() with the PCRE_UTF16 or
PCRE_UTF32 option flag, as appropriate. Alternatively, the pattern must start with the sequence (*UTF16),
(*UTF32), as appropriate, or (*UTF), which can be used with either library. When UTF mode is set, both
the pattern and any subject strings that are matched against it are treated as UTF-16 or UTF-32 strings
instead of strings of individual 16-bit or 32-bit characters.
UTF SUPPORT OVERHEAD
If you compile PCRE with UTF support, but do not use it at run time, the library will be a bit bigger,
but the additional run time overhead is limited to testing the PCRE_UTF[8|16|32] flag occasionally, so
should not be very big.
UNICODE PROPERTY SUPPORT
If PCRE is built with Unicode character property support (which implies UTF support), the escape
sequences \p{..}, \P{..}, and \X can be used. The available properties that can be tested are limited to
the general category properties such as Lu for an upper case letter or Nd for a decimal number, the
Unicode script names such as Arabic or Han, and the derived properties Any and L&. Full lists is given in
the pcrepattern and pcresyntax documentation. Only the short names for properties are supported. For
example, \p{L} matches a letter. Its Perl synonym, \p{Letter}, is not supported. Furthermore, in Perl,
many properties may optionally be prefixed by "Is", for compatibility with Perl 5.6. PCRE does not
support this.
Validity of UTF-8 strings
When you set the PCRE_UTF8 flag, the byte strings passed as patterns and subjects are (by default)
checked for validity on entry to the relevant functions. The entire string is checked before any other
processing takes place. From release 7.3 of PCRE, the check is according the rules of RFC 3629, which are
themselves derived from the Unicode specification. Earlier releases of PCRE followed the rules of RFC
2279, which allows the full range of 31-bit values (0 to 0x7FFFFFFF). The current check allows only
values in the range U+0 to U+10FFFF, excluding the surrogate area. (From release 8.33 the so-called "non-
character" code points are no longer excluded because Unicode corrigendum #9 makes it clear that they
should not be.)
Characters in the "Surrogate Area" of Unicode are reserved for use by UTF-16, where they are used in
pairs to encode codepoints with values greater than 0xFFFF. The code points that are encoded by UTF-16
pairs are available independently in the UTF-8 and UTF-32 encodings. (In other words, the whole surrogate
thing is a fudge for UTF-16 which unfortunately messes up UTF-8 and UTF-32.)
If an invalid UTF-8 string is passed to PCRE, an error return is given. At compile time, the only
additional information is the offset to the first byte of the failing character. The run-time functions
pcre_exec() and pcre_dfa_exec() also pass back this information, as well as a more detailed reason code
if the caller has provided memory in which to do this.
In some situations, you may already know that your strings are valid, and therefore want to skip these
checks in order to improve performance, for example in the case of a long subject string that is being
scanned repeatedly. If you set the PCRE_NO_UTF8_CHECK flag at compile time or at run time, PCRE assumes
that the pattern or subject it is given (respectively) contains only valid UTF-8 codes. In this case, it
does not diagnose an invalid UTF-8 string.
Note that passing PCRE_NO_UTF8_CHECK to pcre_compile() just disables the check for the pattern; it does
not also apply to subject strings. If you want to disable the check for a subject string you must pass
this option to pcre_exec() or pcre_dfa_exec().
If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set, the result is undefined and your
program may crash.
Validity of UTF-16 strings
When you set the PCRE_UTF16 flag, the strings of 16-bit data units that are passed as patterns and
subjects are (by default) checked for validity on entry to the relevant functions. Values other than
those in the surrogate range U+D800 to U+DFFF are independent code points. Values in the surrogate range
must be used in pairs in the correct manner.
If an invalid UTF-16 string is passed to PCRE, an error return is given. At compile time, the only
additional information is the offset to the first data unit of the failing character. The run-time
functions pcre16_exec() and pcre16_dfa_exec() also pass back this information, as well as a more detailed
reason code if the caller has provided memory in which to do this.
In some situations, you may already know that your strings are valid, and therefore want to skip these
checks in order to improve performance. If you set the PCRE_NO_UTF16_CHECK flag at compile time or at run
time, PCRE assumes that the pattern or subject it is given (respectively) contains only valid UTF-16
sequences. In this case, it does not diagnose an invalid UTF-16 string. However, if an invalid string is
passed, the result is undefined.
Validity of UTF-32 strings
When you set the PCRE_UTF32 flag, the strings of 32-bit data units that are passed as patterns and
subjects are (by default) checked for validity on entry to the relevant functions. This check allows
only values in the range U+0 to U+10FFFF, excluding the surrogate area U+D800 to U+DFFF.
If an invalid UTF-32 string is passed to PCRE, an error return is given. At compile time, the only
additional information is the offset to the first data unit of the failing character. The run-time
functions pcre32_exec() and pcre32_dfa_exec() also pass back this information, as well as a more detailed
reason code if the caller has provided memory in which to do this.
In some situations, you may already know that your strings are valid, and therefore want to skip these
checks in order to improve performance. If you set the PCRE_NO_UTF32_CHECK flag at compile time or at run
time, PCRE assumes that the pattern or subject it is given (respectively) contains only valid UTF-32
sequences. In this case, it does not diagnose an invalid UTF-32 string. However, if an invalid string is
passed, the result is undefined.
General comments about UTF modes
1. Codepoints less than 256 can be specified in patterns by either braced or unbraced hexadecimal escape
sequences (for example, \x{b3} or \xb3). Larger values have to use braced sequences.
2. Octal numbers up to \777 are recognized, and in UTF-8 mode they match two-byte characters for values
greater than \177.
3. Repeat quantifiers apply to complete UTF characters, not to individual data units, for example:
\x{100}{3}.
4. The dot metacharacter matches one UTF character instead of a single data unit.
5. The escape sequence \C can be used to match a single byte in UTF-8 mode, or a single 16-bit data unit
in UTF-16 mode, or a single 32-bit data unit in UTF-32 mode, but its use can lead to some strange effects
because it breaks up multi-unit characters (see the description of \C in the pcrepattern documentation).
The use of \C is not supported in the alternative matching function pcre[16|32]_dfa_exec(), nor is it
supported in UTF mode by the JIT optimization of pcre[16|32]_exec(). If JIT optimization is requested for
a UTF pattern that contains \C, it will not succeed, and so the matching will be carried out by the
normal interpretive function.
6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly test characters of any code value,
but, by default, the characters that PCRE recognizes as digits, spaces, or word characters remain the
same set as in non-UTF mode, all with values less than 256. This remains true even when PCRE is built to
include Unicode property support, because to do otherwise would slow down PCRE in many common cases. Note
in particular that this applies to \b and \B, because they are defined in terms of \w and \W. If you
really want to test for a wider sense of, say, "digit", you can use explicit Unicode property tests such
as \p{Nd}. Alternatively, if you set the PCRE_UCP option, the way that the character escapes work is
changed so that Unicode properties are used to determine which characters match. There are more details
in the section on generic character types in the pcrepattern documentation.
7. Similarly, characters that match the POSIX named character classes are all low-valued characters,
unless the PCRE_UCP option is set.
8. However, the horizontal and vertical white space matching escapes (\h, \H, \v, and \V) do match all
the appropriate Unicode characters, whether or not PCRE_UCP is set.
9. Case-insensitive matching applies only to characters whose values are less than 128, unless PCRE is
built with Unicode property support. A few Unicode characters such as Greek sigma have more than two
codepoints that are case-equivalent. Up to and including PCRE release 8.31, only one-to-one case mappings
were supported, but later releases (with Unicode property support) do treat as case-equivalent all
versions of characters such as Greek sigma.
AUTHOR
Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.
REVISION
Last updated: 27 February 2013
Copyright (c) 1997-2013 University of Cambridge.
PCRE 8.33 27 February 2013 PCREUNICODE(3)