Provided by: btrbk_0.22.2-1_all 
NAME
btrbk.conf - btrbk configuration file
SYNOPSIS
/etc/btrbk.conf
/etc/btrbk/btrbk.conf
DESCRIPTION
The btrbk configuration file specifies which btrfs subvolumes on the filesystem are to be processed, what
target subvolumes should be used to create the backups, and where the snapshots should be generated. The
retention policy, as well as most other options can be defined either globally or within a section.
The options specified always apply to the last section encountered, superseding the values set in upper-
level sections. This means that global options must be set before any sections are defined.
SECTIONS
volume <volume-directory>|<url>
Directory of a btrfs volume containing the source subvolume(s) to be backed up. <volume-directory>
must be an absolute path and point to a btrfs volume (or subvolume). Usually the mount point of a
btrfs filesystem mounted with the subvolid=0 option.
subvolume <subvolume-name>
Subvolume to be backed up, relative to the <volume-directory> specified in the volume section.
Multiple subvolume sections are allowed within volume sections.
target <type> <target-directory>|<url>
Target type and directory where the backup subvolumes are to be created. See the TARGET TYPES section
for supported <type>. Multiple target sections are allowed within subvolume sections.
For the volume and target sections, you can specify a ssh-url instead of a local directory. The syntax
for <url> is:
ssh://host.xz/path/to/volume
Note that btrfs is very picky on file names (mainly for security reasons), only the characters [0-9] [a-
z] [A-Z] and "._+-@" are allowed.
OPTIONS
transaction_log <file>
If set, all transactions (snapshot create, subvolume send-receive, subvolume delete) as well as abort
messages are logged to <file>, in a space-separated table format.
timestamp_format short|long
Timestamp format used as postfix for new snapshot subvolume names. Defaults to “short”.
short YYYYMMDD[_N] (e.g. "20150825", "20150825_1")
long YYYYMMDD<T>hhmm[_N] (e.g. "20150825T1531")
Note that a postfix "_N" is only appended to the timestamp if a snapshot/backup already exists with
the timestamp of current date/time.
snapshot_dir <directory>
Directory in which the btrfs snapshots are created, relative to <volume-directory> of the volume
section. Note that btrbk does not autmatically create this directory, and the snapshot creation will
fail if it is not present.
snapshot_name <basename>
Base name of the created snapshot (and backup). This option is only valid in the subvolume section.
Defaults to <subvolume-name>.
snapshot_create always|ondemand|onchange|no
If set to “ondemand”, snapshots are only created if the target subvolume is reachable (useful if you
are tight on disk space and you only need btrbk for backups to an external disk which is not always
connected). If set to “onchange”, snapshots are only created if the source subvolume has changed
since the last snapshot (more precisely: if the btrfs generation has been increased since the last
snapshot). If set to “always”, snapshots are always created. If set to “no”, the snapshots are never
created (useful in conjunction with the resume_missing option if another instance of btrbk is taking
care of snapshot creation). Defaults to “always”.
incremental yes|no|strict
If set, incremental backups are created. If set to “strict”, non-incremental (initial) backups are
never created. Defaults to “yes”.
resume_missing yes|no
If set, the backups in the target directory are compared to the source snapshots, and missing backups
are created if needed (complying to the target preserve matrix). Defaults to “yes”.
target_preserve_daily all|<number>
How many days of backups should be preserved. Defaults to “all”.
target_preserve_weekly all|<number>
Defines for how many weeks back weekly backups should be preserved. Every backup created at
preserve_day_of_week (or the next backup in this week if none was made on the exact day) is
considered as a weekly backup. Defaults to “0”.
target_preserve_monthly all|<number>
Defines for how many months back monthly backups should be preserved. Every last weekly backup in a
month is considered a monthly backup. Defaults to “all”.
snapshot_preserve_daily
snapshot_preserve_weekly
snapshot_preserve_monthly
Defines retention policy for the snapshots, with same semantics as the target_preserve_* options.
preserve_day_of_week monday|tuesday|...|sunday
Defines on what day a backup/snapshot is considered as a weekly backup. Defaults to “sunday”.
group <group-name>[,<group-name>]...
Add the current section (volume, subvolume or target) to a user-defined group, which can be used as
filter for several btrbk commands.
ssh_identity <file>
Absolute path to a ssh identity file (private key). Note that if the private key is password
protected, btrbk will prompt for user input, which is usually not desired.
ssh_user <username>
Remote username for ssh. Defaults to “root”. Note that you will have to make sure that the remote
user is able to run /sbin/btrfs (which needs root privileges).
ssh_port <port>
Port to connect to on the remote host. Defaults to “default” (the port specified in ssh_config, which
defaults to 22).
ssh_compression yes|no
Enables or disables the compression of ssh connections. Defaults to “no”.
ssh_cipher_spec <cipher_spec>
Selects the cipher specification for encrypting the session (comma-separated list of ciphers in order
of preference). See the "-c cipher_spec" option in ssh(1) for more information. Defaults to “default”
(the ciphers specified in ssh_config).
btrfs_commit_delete after|each|no
If set, make sure the deletion of snapshot and backup subvolumes are committed to disk when btrbk
terminates. Defaults to “no”.
btrfs_progs_compat yes|no *experimental*
Enable compatibility mode for btrfs-progs < 3.17 (btrfs --version). This option can be set either
globally or within a target section. If enabled, the latest common snapshots are determined by
subvolume names instead of received_uuid, which can lead to false guesses if the snapshot or target
subvolumes are manipulated by hand (moved, deleted).
Lines that contain a hash character (#) in the first column are treated as comments.
TARGET TYPES
send-receive
Backup to a btrfs filesystem, using "btrfs send/receive". This is the recommended (standard) target
type. The <target-directory> must be an absolute path and point to a btrfs volume (or subvolume). See
btrfs-send(8), btrfs-receive(8).
raw *experimental*
Backup to a raw (filesystem independent) file from the output of btrfs-send(8), with optional
compression and encryption.
Note that the target preserve mechanism is currently disabled for raw backups (btrbk does not delete
any raw files)!
Additional options for raw targets:
raw_target_compress gzip|bzip2|xz|no
raw_target_compress_level default|<number>
raw_target_compress_threads default|<number>
raw_target_encrypt gpg|no
gpg_keyring <file>
gpg_recipient <name>
Target file name syntax:
<snapshot-name>--<received_uuid>[@<parent_uuid>].btrfs[.gz|.bz2|.xz][.gpg]
The <parent_uuid> is only set on incremental backups, and points to the <received_uuid> of the
previous backup in a incremental backup chain.
For incremental backups ("incremental yes"), please note that:
1. As soon as a single incremental backup file is lost or corrupted, all later incremental backups
become invalid, as there is no common parent for the subsequent incremental images anymore. This
might be a good compromise for a vacation backup plan, but for the long term make sure that a
non-incremental backup is triggered from time to time.
2. There is currently no support for rotation of incremental backups: if incremental is set, a full
backup must be triggered manually from time to time in order to be able to delete old backups.
AVAILABILITY
Please refer to the btrbk project page http://www.digint.ch/btrbk/ for further details.
SEE ALSO
btrbk(1)
AUTHOR
Axel Burri <axel@tty0.ch>
btrbk v0.22.2 2016-02-02 btrbk.conf(5)