Provided by: dacs_1.4.28b-3ubuntu2_amd64 bug

NAME

       dacs.quick - DACS Quick Start Tutorial

DESCRIPTION

       The purpose of DACS Quick Start is to explain, step-by-step, how to configure a very basic
       DACS-enabled web site from scratch so that you can try DACS with minimal effort. We hope
       that by performing the entire example configuration yourself, you will gain a better
       understanding of how DACS works and how to go about configuring it to meet your needs. By
       following along with some simple examples, you will create a completely stand-alone,
       single jurisdiction DACS federation on one of your hosts. You will become familiar with
       some of the DACS utilities and web services. When you are done, you can simply delete a
       few directories to uninstall everything. The tutorial should take about 30 minutes to
       complete the first time.

       After successfully completing Quick Start, you should understand DACS well enough that you
       can proceed to experiment with configuration and features, and perhaps use the example
       configuration as a starting point to meet your requirements.

       We do not provide much background or technical information about DACS here, or tell you
       how to set up a fully functional, production-quality DACS system. You may find it
       worthwhile to review the FAQ[1] before beginning, but if you're itching to get started
       right away you may do so. For technical details, please refer to the manual pages[2] and
       other documentation.

       We assume that you've got some hands-on experience configuring and using Apache, although
       Quick Start tells you exactly what to do.  To avoid frustrating problems, we recommend
       that you resist the temptation to stray from the instructions except when indicated.
       Experienced Apache administrators may recognize the opportunity for some shortcuts, but
       since we're trying to keep things simple for a wide audience, we'd rather not get
       sidetracked by mentioning them. Likewise, experienced DACS administrators may recognize
       alternative ways - maybe even better ways - of doing things. But our goal is to get
       beginners started quickly, so we'll progress in small steps, explaining what is being
       done, and providing assurance that everything is correct so far. That way if you run into
       a problem, you should be able to isolate and fix it more easily.

       We'll assume that you've already obtained the latest version of DACS, unpacked it, and at
       least skimmed through dacs.readme(7)[3] and dacs.install(7)[4]. This document should have
       come from that version of DACS.

           Note
            1. You will be installing and configuring a basic Apache server (httpd) as part of
               this tutorial. You may perform this installation on any supported platform,
               whether your desktop Unix host or some other host, such as a remote server. You
               will find the former somewhat easier and safer to do, so it is recommended when
               possible. If doing the installation on a particular host may expose the tutorial's
               web server to requests from the Internet, be sure to carefully consider the
               security implications and take appropriate precautions before proceeding. Nothing
               in the tutorial ought to make the host running the web server more vulnerable, but
               if you experiment with DACS on your own there could be unintended consequences. It
               is probably a good idea to stop Apache when you are no longer using it.

            2. You will find it much easier to follow along if you use the HTML version of this
               document because it includes links that save you from having to type examples.
               Obviously these links will only work if you have configured the tutorial's
               environment. Some links from this document to other documentation point at the
               tutorial environment, so they will not function if that environment is not
               available. Also, your web browser must be capable of handling cookies and have
               that feature enabled.

            3. Make sure that this document came with the DACS release that you are working with.

            4. The Quick Start procedure has been performed successfully on FreeBSD and CentOS,
               but we expect it to work on most Unix-like systems. If you run into a problem, you
               should not proceed until you have fixed it.

            5. Depending on your environment, some tasks may need to be done as root (e.g., using
               sudo). In particular, editing /etc/hosts and DACS configuration files, setting
               file ownership and permissions, and the make install commands are likely to need
               this. No program or web service used in the examples needs to run as root. Except
               for one or two optional DACS web services, none of the DACS web services needs to
               run set-uid or set-gid.

            6. Ordinarily, all DACS-related network communication must be done over SSL. Setting
               up SSL appropriately is primarily an Apache configuration task[5], requiring a
               server certificate; anyone who has done this before will likely understand what
               needs to be done after completing Quick Start. But to help keep this document
               simple and because our goal is not to create a production-quality DACS
               installation, we will neither use SSL in the examples nor mention SSL again.

            7. It's a challenge to write instructions that will work everywhere, everytime, for
               everyone, so please accept our apologies for any deficiencies in this document. We
               are keen to improve it, so if you encounter any problems while trying this
               tutorial, or if you have any questions, please contact us[6]. Our goal is to make
               it as easy as possible to get started with DACS.

       Quick Start Steps:

        1. Step 1: Install required third-party packages

        2. Step 2: Install and configure Apache

        3. Step 3: Build and install DACS

        4. Step 4: DACS-enable Apache

        5. Step 5: Do basic DACS configuration

        6. Step 6: Do basic Apache configuration for DACS

        7. Step 7: Test basic DACS services

        8. Step 8: Try DACS authentication

        9. Step 9: DACS-wrapping a web service

       10. Step 10: What's next?

       11. Step 11: Clean up

   Step 1: Install required third-party packages
       Obtain the versions of Apache[7], OpenSSL[8], and Expat[9] that are specified in
       dacs.install(7)[4]. If your system already has suitable versions of OpenSSL[8], and
       Expat[9] installed, you may use them if you are comfortable deviating from these
       instructions; you may have to adjust paths that are used below, however. Detailed
       instructions have been provided for building OpenSSL[10] and Expat[11]. This document
       assumes that Apache 2.2 is being used; you may use 2.4 if you are able to adapt the
       instructions on your own.

       For the purposes of this exercise, those are the only third-party packages that you need,
       other than gmake, GCC, and the usual software development tools. Install OpenSSL and Expat
       now; we will deal with Apache in the next step.

           Note
           We will assume that these packages are installed under /usr/local. If you installing
           elsewhere, be sure to adjust paths appropriately in the examples below.

           Some administrators prefer to use a particular file extension, such as ".cgi", for CGI
           executables. The easiest way to make DACS accommodate this is to pass the
           --with-cgi-suffix flag to configure (see dacs.install(7)[4]). This results in the
           configuration variable ${Conf::dacs_cgi_bin_suffix} being set to the suffix. In this
           document, we will assume that no special file extension is required.

   Step 2: Install and configure Apache
       Because you probably do not want to use a production web server for this exercise, so that
       we're on the same page to begin with, and to make it easier for you to clean up later,
       we'll build and install a fresh Apache server. It will be best if you start from scratch
       by unpacking an Apache distribution into a new directory, building and installing it, and
       then verifying that the default Apache configuration works. We will install this Apache in
       /usr/local/apache-dacs so that it does not interfere with anything already on your system
       - you may change this path, but remember to make appropriate changes to the instructions
       that follow.

        1. From the root of the Apache distribution, you need to build Apache. Review the Apache
           INSTALL file. Unfortunately, there is no simple way to build Apache that will work on
           all platforms, so you will need to review the detailed instructions[12]. Then build
           and install Apache.

           Do not configure any Apache modules or customizations. We want to create a vanilla web
           server. The path /usr/local/apache-dacs is being used to avoid any existing Apache
           installation; when you are finished with the tutorial, you will remove this directory.

        2. We will soon configure a virtual host for a (fake) domain name that we have reserved
           for this purpose, but first we must make dodgers.dacstest.dss.ca an alias for the host
           that will run httpd. Choose one of the following two options:

            1. If you are installing Apache on the same machine from which you are running your
               web browser, edit /etc/hosts as follows:

                   127.0.0.1     localhost dodgers.dacstest.dss.ca

            2. If you will be running your browser on a host different from where Apache is
               running, you will need to add an alias in /etc/hosts for that host's IP address on
               both machines. The entry will have the format:

                   hostip       hostname dodgers.dacstest.dss.ca

               For example, on my system I used:

                   10.0.0.125     i7.dss.ca i7 dodgers.dacstest.dss.ca

               So the hostip I selected above is 10.0.0.125.

               Notes
                1. If your desktop is a Windows platform rather than Unix-based, you will need to
                   edit C:\Windows\system32\drivers\etc\hosts or
                   C:\WINNT\system32\drivers\etc\hosts (or similar) instead of /etc/hosts.

                2. You can use the domain dodgers.dacstest.dss.ca and the others in this document
                   no matter where your host is located. These domain names will not be visible
                   outside of the hosts on which you define them by hand.

                3. After you have completed this exercise, please remember to delete the aliases.
           To verify the change, use ping:

               % ping dodgers.dacstest.dss.ca

           (You may need to run it as /sbin/ping or something similar on your system.)

        3. We need to make a few changes to Apache's default configuration, in case you are
           already running a web server on this machine and as a first step towards some
           customization that we will need shortly. We will add a virtual host definition and do
           some initial set up for DACS. Edit /usr/local/apache-dacs/conf/httpd.conf, advance to
           the bottom of the file, and insert the text that appears below:

               # Permit access to the DACS documents
               <Directory /usr/local/dacs/www/*>
                 Options Indexes FollowSymLinks
                 Order allow,deny
                 Allow from all
               </Directory>

               # Permit access
               # Configure a virtual host and make the DACS documents available
               Listen dodgers.dacstest.dss.ca:18123
               <VirtualHost *:18123>
                 ServerName dodgers.dacstest.dss.ca:18123
                 DocumentRoot "/usr/local/apache-dacs/htdocs"
                 ErrorLog     "/usr/local/apache-dacs/logs/error_log"
                 TransferLog  "/usr/local/apache-dacs/logs/access_log"
                 ScriptAlias /cgi-bin/ "/usr/local/apache-dacs/cgi-bin/"

                 Alias /css       "/usr/local/dacs/www/css/"
                 Alias /dacs      "/usr/local/dacs/www/"
                 Alias /dtd-xsd   "/usr/local/dacs/www/dtd-xsd/"
                 Alias /examples  "/usr/local/dacs/www/examples/"
                 Alias /handlers  "/usr/local/dacs/www/handlers/"
                 Alias /infocards "/usr/local/dacs/www/infocards/"
                 Alias /man       "/usr/local/dacs/www/man/"
                 Alias /misc      "/usr/local/dacs/www/misc/"
                 Alias /mod       "/usr/local/dacs/www/mod/"
               </VirtualHost>

           This VirtualHost[13] section is going to correspond to the DACS jurisdiction that we
           will define shortly. The purpose of the Directory[14] and Alias[15] directives is to
           make various web resources available without having to copy them under your
           DocumentRoot[16].

               Note
                1. In our examples, we use port 18123, which we're guessing is unlikely to
                   already be in use on your machine. If you are unlucky and it is in use, Apache
                   will complain when you start it and you will obviously need to select a
                   different port number. So that the examples will continue to work, consider
                   creating a copy of this document and changing all occurrences of "18123" to
                   the port number you have selected. If available, commands such as
                   netstat(1)[17] and sockstat(1)[18] can tell you which ports are currently in
                   use. In the event that you will be accessing your server from the other side
                   of a firewall (which is not recommended, as previously mentioned), keep in
                   mind that traffic may not ordinarily be passed through on this port.

                2. If you are already running Apache on port 80 (the default) or if you are not
                   root whenever you run apachectl in any of the following steps, you must
                   comment out (or delete) all Listen[19] directives for port 80 in httpd.conf.
                   Therefore, comment out all directives that look like any of the following:

                       Listen 80
                       Listen 0.0.0.0:80
                       Listen [::]:80

        4. It is good practice to run httpd as an unprivileged user id and Apache does this by
           default through the User[20] directive in httpd.conf:

               User nobody

           DACS web services are run as the same user id as httpd, but they must be able to read
           and sometimes write files within the DACS installation directory. These files should
           not be readable or writable by other processes or anyone other than a DACS
           administrator. Using mod_suexec[21] is one approach, but for the purpose of this
           tutorial we want to keep things simple. Note that setting User[20] (or Group[22]) to
           root is not a good idea.

           The Apache documentation recommends setting up a new group specifically for running
           the server, and we will take this approach. We will assume in our examples that this
           group is called www. You may need to create this group (see group(5)[23]) or you may
           already have a different but suitable group name to use (e.g., webservd, _www, or
           daemon). Whatever group name you choose, when DACS is installed in the next step you
           will be prompted for this group id and you must make the appropriate change to
           httpd.conf:

               Group www

           Because we will refer to this group name often in later steps, save its name as the
           value of the shell variable dacsgroup (we will use csh/tcsh syntax - use the syntax
           preferred by your shell):

               % set dacsgroup=www

               Note
               Consider adding yourself to this group while you are working on this tutorial
               because you will have to do much less of the work as root. Remember to logout and
               login again after adding yourself, and verify the change using the groups command.
           Change the group id of files in the Apache installation directory to this group and
           adjust permissions (you may have to do this as root):

               % chgrp -R $dacsgroup /usr/local/apache-dacs
               % chmod -R g+w /usr/local/apache-dacs

        5. As root, start your httpd...

               # /usr/local/apache-dacs/bin/apachectl start

           The reason you must do this as root is because it is required by Apache's User[20] and
           Group[22] directives.

        6. Use your favourite browser (or link fetcher, such as wget) to verify that Apache is
           serving content, starting with this link:

               http://dodgers.dacstest.dss.ca:18123

           If this fails, check again that your host has the correct IP address for
           dodgers.dacstest.dss.ca. If you are running your browser on a different host than
           Apache, check for a networking or firewall related problem (and try the browser on the
           same host as Apache).

               Note
               It appears that CentOS disallows non-localhost connection requests by default; to
               allow Apache to receive non-localhost requests on CentOS, run (as root):

                   # system-config-securitylevel

               In the "Other ports" section of the "Firewall Options", add port 18123 for
               protocol tcp. Once the change is applied it is persistent, so remember to remove
               the port from the list when you are finished with this tutorial. Another option,
               if it is safe to do so, is to totally disable the firewall. On CentOS:

                   # service iptables stop

               If you choose to do this you should either restart the firewall when you are done
               ("service iptables start") or reboot.

               Another alternative, for CentOS and other systems, is to use the appropriate
               command (e.g., iptables, ipfw, or pfctl) to add a firewall rule to allow TCP
               access to port 18123.

        7. You should now check that your httpd was built properly. First, make sure that
           test-cgi is executable (a CGI that is installed by Apache):

               % chmod 0750 /usr/local/apache-dacs/cgi-bin/test-cgi

           And then invoke it:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/test-cgi

           Look for the SERVER_SOFTWARE variable in its output and ensure that its value shows
           the correct versions of Apache, mod_ssl, and OpenSSL; if you find something
           unexpected, you probably didn't configure and/or install Apache or OpenSSL correctly.

        8. You have confirmed that Apache is properly installed, so stop the web server:

               % /usr/local/apache-dacs/bin/apachectl stop

   Step 3: Build and install DACS
       Now it is time to build and install the DACS utilities and web services. Make your working
       directory the src subdirectory of the DACS distribution.

        1. Build and install DACS web services and utilities. You must use gmake, the GNU Make
           utility. Adjust the paths specified for Expat, Apache, and OpenSSL as necessary. The
           DACS installation directory must be writable to you and you must be able to set file
           user and group ownership (see below); you may need to be root.

               % ./configure --prefix=/usr/local/dacs \
                  --disable-shared --enable-static \
                  --enable-passwd-auth --disable-bdb \
                  --with-apache=/usr/local/apache-dacs \
                  --with-apache-apr=/usr/local/apache-dacs/apr-httpd \
                  --with-expat=/usr/local/expat-2.0.1 \
                  --with-ssl=/usr/local/openssl-1.0.1c
               % gmake

           If all goes well:

               % gmake install

           You can ignore any warnings about ACLs.

           You will be prompted for the user id and group id to be used for DACS files and
           directories. The group id you give should match the value you used for Apache's Group
           directive (that is, the value of $dacsgroup). The user id can be your user id; if it
           is not, you will need to do the upcoming install command (and some later commands) as
           root. You will need to do gmake install as root if your account has insufficient
           privileges to set the user and group ids that you specify. The installation procedure
           will remember your answers to the prompts; if you make a mistake or want to change
           them, do:

               % conftools/setaccess-sh reset

           and try gmake install again.

   Step 4: DACS-enable Apache
       We'll continue by installing the mod_auth_dacs[24] module for Apache. Make your working
       directory the apache subdirectory of the DACS distribution.

        1. Compile and install the mod_auth_dacs module. As earlier, you will need to do gmake
           install as root if your account has insufficient privileges to set the user and group
           ids that you specify.

               % gmake tag
               % gmake install

           If this succeeds, your Apache httpd.conf[25] file should now contain the following
           directive:

               LoadModule auth_dacs_module modules/mod_auth_dacs.so

           Please check that this is so. If you cannot find that directive, add it manually near
           the part of httpd.conf that talks about the LoadModule[26] directive.

        2. Start Apache again (as root):

               # /usr/local/apache-dacs/bin/apachectl start

           and take another look at the SERVER_SOFTWARE variable:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/test-cgi

           The SERVER_SOFTWARE variable ought to look the same as before, except it should now
           also mention mod_auth_dacs.

           Congratulations - you are now running a DACS-enabled web server!  DACS is not
           configured to do anything at the moment, mind you, but your web server is now capable
           of DACS-wrapping web services. You should be able to view the DACS manual pages served
           from the web server you just installed:

               http://dodgers.dacstest.dss.ca:18123/man

   Step 5: Do basic DACS configuration
       Although your Apache is now DACS-enabled, a little more configuration of both DACS and
       Apache are necessary before you can do anything interesting. We'll continue by working
       with the DACS configuration (see dacs.conf(5)[27]).

       We begin this step by defining a new DACS federation that consists of one jurisdiction. We
       will call the new federation DACSTEST and associate it with the domain name
       dacstest.dss.ca. We will call our jurisdiction LA. Incidentally, the names that we are
       using in this tutorial for our federation and jurisdiction ("DACSTEST", "LA", and
       "dacstest.dss.ca") are not "special"; there's an underlying theme that should be apparent
       to any baseball fan but we could have chosen any syntactically valid names. The domain
       name for our jurisdiction (dodgers.dacstest.dss.ca) is only special in that it is a
       subdomain of dacstest.dss.ca; this must be the case for all jurisdictions in our example
       federation.

           Security
           All of the files and directories that we create in this and future steps must be
           readable by DACS web services. This means that they must have their group ownership
           set to $dacsgroup and have group read and write permissions, as discussed earlier.

       We're going to be using a few long pathnames in this step and later on, so to help
       unclutter the instructions, and for your convenience, we will represent them as shell
       variables. For example, the pathname /usr/local/dacs/federations will be referred to as
       $feds and the pathname $feds/dacstest.dss.ca/LA will be $la. You may find it useful at
       this time to define the following variables in your shell using the particular syntax it
       prefers (we use tcsh):

           % set dacs=/usr/local/dacs
           % set bin=$dacs/bin
           % set feds=$dacs/federations
           % set la=$feds/dacstest.dss.ca/LA

       If you are using a compatible shell, such as csh, you will then be able to copy and paste
       command lines and other text that follows in the tutorial.

           Tip
           At this point you can use the dacsinit(1)[28] program, found in the distribution's src
           directory, to perform the operations in this step for you. By default, the program
           uses the default paths that were established when DACS was built and the example paths
           used in this step. When prompted, simply use the dacsinit default values (just hit
           Return/Enter), which should result in the same configuration as you would obtain by
           manually following the directions in this step.

           You can also use dacsinit to create a configuration for a federation with one very
           basic jurisdiction based on names of your choosing. You can later extend or customize
           this configuration manually. Also see Initial Configuration[29].

       Although you can get away with having a single DACS configuration file on a host, we
       recommend a hierarchical organization. The file site.conf, although optional, holds
       standard default configuration directives as well as site-specific directives for all
       federations configured on this host. One or more files named dacs.conf can be used on a
       per-jurisdiction, per-federation, or per-host basis; that is, each jurisdiction on a host
       can have its own dacs.conf, or all (or some) of the jurisdictions on a host can share a
       dacs.conf, or everything can just be lumped into one dacs.conf. It's entirely up to you.

       When configure is run to build DACS, you can specify default locations for various
       configuration files, including site.conf and dacs.conf. We did not change the defaults
       when we built DACS above, so our examples will use the default paths.

           Tip
           We recommend that you always use the site.conf-std that comes with your DACS
           distribution as your site.conf file and that you do not make any modifications to it,
           instead putting customizations in your dacs.conf file. This will make upgrades easier
           and less error-prone.

        1. Proceed by installing the default site configuration file as $feds/site.conf (recall
           that we defined the shell variables earlier[30], and that you may have to be root to
           be able to install correctly):

               % install -c -g $dacsgroup -m 0640 $feds/site.conf-std $feds/site.conf

               Note
               If the install command is unavailable on your system, you can use
               src/conftools/install-sh relative to your DACS distribution directory. Or just use
               cp (or mkdir), chgrp, and chmod.

        2. Since we are not using SSL in this tutorial, edit $feds/site.conf and change the value
           of the SECURE_MODE[31] directive to "off". For production use, the directive's value
           should always be "on":

               SECURE_MODE "off"

        3. It is convenient - though not required - to collect the configuration directives for
           all jurisdictions on this host in a single file. It's not unusual for a host to be
           associated with just one jurisdiction (and one federation), but this is certainly not
           always the case.

               % install -c -g $dacsgroup -m 0660 /dev/null $feds/dacs.conf

        4. We will create a directory where most of the files associated with our new federation
           will live:

               % install -d -g $dacsgroup -m 0770 $feds/dacstest.dss.ca

        5. And a subdirectory within it where most of the files associated with our new
           jurisdiction will live:

               % install -d -g $dacsgroup -m 0770 $la

        6. Create a directory where we will put access control rules (also called ACLs, access
           control lists, or simply rules) for our jurisdiction, and we also need an empty
           revocation file:

               % install -d -g $dacsgroup -m 0770 $la/acls
               % install -c -g $dacsgroup -m 0660 /dev/null $la/acls/revocations

        7. Create directories where we will put group definitions for our jurisdiction and define
           the membership of our federation:

               % install -d -g $dacsgroup -m 0770 $la/groups $la/groups/LA $la/groups/DACS
               % install -c -g $dacsgroup -m 0660 /dev/null $la/groups/DACS/jurisdictions.grp

           Paste the following text into the $la/groups/DACS/jurisdictions.grp file:

               <groups xmlns="http://dss.ca/dacs/v1.4">
                <group_definition jurisdiction="LA" name="jurisdictions"
                    mod_date="Tue, 14-Jun-2005 16:06:00 GMT" type="public">
                  <group_member jurisdiction="LA" name="LA Jurisdiction" type="meta"
                    alt_name="Test Jurisdiction for the LA Dodgers"
                    dacs_url="http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs"
                    authenticates="yes" prompts="no"/>
                </group_definition>
               </groups>

           (Remember to change 18123 if you are using a different port.) The purpose of
           jurisdictions.grp is to provide DACS with information about the jurisdictions in this
           federation. All jurisdictions in a federation should use identical jurisdictions.grp
           files. We're not going to make much use of this in the tutorial, but if you add a
           jurisdiction or if any of this information changes, jurisdictions.grp would ordinarily
           be updated everywhere in your federation. For instance, if you were to add a
           jurisdiction to your federation, you should add another group_member element to the
           group_definition that describes the new jurisdiction, and then copy the updated
           jurisdictions.grp file to each jurisdiction. Please see dacs.groups(5)[32] for
           additional information.

        8. We need some basic configuration directives for the jurisdiction LA. Paste the
           following text into the $feds/dacs.conf file:

               <Configuration xmlns="http://dss.ca/dacs/v1.4">

                <Default>
                  FEDERATION_DOMAIN "dacstest.dss.ca"
                  FEDERATION_NAME "DACSTEST"
                  LOG_LEVEL "info"
                </Default>

                <Jurisdiction uri="dodgers.dacstest.dss.ca">
                  JURISDICTION_NAME "LA"
                </Jurisdiction>

               </Configuration>

        9. And let's make this the default configuration file for DACS jurisdictions at this
           site:

               % rm -f $la/dacs.conf
               % ln -s $feds/dacs.conf $la/dacs.conf

       10. Now, let's ask DACS to display its configuration by running the dacsconf(1)[33]
           utility:

               % $bin/dacsconf -uj LA -q

           This configuration is the result of merging the contents of $la/dacs.conf (which
           points to $feds/dacs.conf) and $feds/site.conf, with directives in the former file
           overriding directives in the latter.

       11. We must create encryption keys for this federation using the dacskey(1)[34] utility:

               % install -c -g $dacsgroup -m 0640 /dev/null $feds/dacstest.dss.ca/federation_keyfile
               % $bin/dacskey -uj LA -q $feds/dacstest.dss.ca/federation_keyfile
               % ls -l $feds/dacstest.dss.ca/federation_keyfile

           We could not do this until after the jurisdiction had been configured because dacskey
           needs to look at dacs.conf.

               Security
               The federation key file must be kept secret. Any person or process that can read
               the federation key file can create DACS identities. It should be readable only by
               its owner and DACS and not readable by anyone else.

       12. Similarly, we should create encryption keys for our jurisdiction:

               % install -c -g $dacsgroup -m 0640 /dev/null $la/jurisdiction_keyfile
               % $bin/dacskey -uj LA -q $la/jurisdiction_keyfile
               % ls -l $la/jurisdiction_keyfile

           Like the federation keys, these keys must also be kept secret. But the jurisdiction
           keys are private to their jurisdiction and are not shared among federation members.

       13. Make sure that all of the files and directories starting with /usr/local/dacs have
           appropriate permissions, as discussed earlier.

           Note
           If you modify httpd.conf you must restart Apache for the changes to take effect. If
           you modify dacs.conf, site.conf, or any other DACS configuration file, the changes
           take effect immediately and do not require restarting Apache.

   Step 6: Do basic Apache configuration for DACS
       Your Apache is now DACS-enabled and we've configured DACS. Before we can do anything
       interesting we must make some changes to the Apache configuration. We will begin by
       DACS-wrapping DACS web services, which is required.

        1. Edit /usr/local/apache-dacs/conf/httpd.conf and locate the VirtualHost[13] section
           that you added earlier. Inside that VirtualHost section and near its end, add the
           following text (remember to adjust paths as necessary):

               AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs "-t -v"
               SetDACSAuthMethod dacs-acs external
               SetDACSAuthConf dacs-acs "/usr/local/dacs/federations/dacs.conf"

               <Location /cgi-bin/dacs>
                 Require valid-user
               # Note: For Apache 2.4, instead use:
               # Require dacs-authz
                 Options ExecCGI
                 AuthType DACS
                 AuthDACS dacs-acs
               </Location>

           These directives configure the virtual host to DACS-wrap the contents of all URLs that
           fall under the /cgi-bin/dacs namespace. The first three directives tell mod_auth_dacs
           where to find the external DACS access control program (dacs_acs(8)[35]) and the DACS
           configuration file.

        2. Start (or restart) Apache so that it uses its new configuration (as root):

               # /usr/local/apache-dacs/bin/apachectl restart

           DACS should now be enforcing access control on the /cgi-bin/dacs part of the server's
           URL space.

        3. Check that you can still access test-cgi (which you have not DACS-wrapped):

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/test-cgi

        4. Now, let's see what happens when we try to access dacs_prenv:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_prenv[36]

           Apache should produce a "403 Forbidden" error, which causes DACS to display an "Access
           Denied by DACS" page (actually, it is the contents of the file
           /usr/local/dacs/www/handlers/acs_failed.html, which is set by the
           ACS_ERROR_HANDLER[37] directive in site.conf). This happens because the default rules
           do not grant access to dacs_prenv, so all access will be denied.

        5. To finish up this step, let's add a rule that will grant everyone access to
           dacs_prenv. Create $la/acls/acl-tutorial.0 with appropriate permissions:

               % install -c -g $dacsgroup -m 0660 /dev/null $la/acls/acl-tutorial.0

           and then paste the following text into it:

               <acl_rule status="enabled">
                 <services>
                   <service url_expr='"${Conf::dacs_cgi_bin_prefix}/dacs_prenv${Conf::dacs_cgi_bin_suffix}"'/>
                   <service url_expr='"${Conf::dacs_cgi_bin_prefix}/dacs_version${Conf::dacs_cgi_bin_suffix}"'/>
                 </services>

                 <rule order="allow,deny">
                   <allow>
                     user("any")
                   </allow>
                 </rule>
               </acl_rule>

           Whenever you add or change an access rule, you must rebuild the rule index for the
           jurisdiction:

               % $bin/dacsacl -uj LA -q -build
               % chgrp $dacsgroup $la/acls/INDEX

           It's currently only really necessary to run dacsacl if you add a rule or modify any
           part of a rule's services element, but this may change in a future release so just do
           it always. We make sure that the index file's group ID is correct.

           This time dacs_prenv should work because our new rule grants access to everyone. Try
           it:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_prenv[36]

           This output includes some new environment variables that are passed to all
           DACS-wrapped programs. These variables begin with "DACS_", such as DACS_VERSION - see
           dacs_acs(8)[38] for additional information.

   Step 7: Test basic DACS services
       There's still not too much you can do at this point, but there are a few DACS services
       that you can try. If one of these requests fails, take a look at the DACS log files in the
       /usr/local/dacs/logs directory for clues. The most likely cause is incorrect permissions
       on a file or directory, or possibly you made an editing mistake.

        1. The dacs_version(8)[39] web service displays various version information, naturally
           enough:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_version

        2. The dacs_list_jurisdictions(8)[40] web service displays information about
           jurisdictions:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_list_jurisdictions

           You may recognize some of this material from the jurisdictions.grp file.

        3. We saw the conf utility earlier. We can get the same information from a web service:

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_conf

           Ooops! You should have been denied access to this web service. If you examine the
           default ACL (see dacs.acls(5)[41]) for this web service, which can be found in
           /usr/local/dacs/acls/acl-conf.0, you might suspect that access to dacs_conf will only
           be granted to identities that satisfy the expression "dacs_admin()" (see
           dacs.exprs(5)[42]). And since you have not signed on to obtain a DACS identity, the
           ACL should deny access. After we do a little more DACS configuration work in the next
           step, we will give this another try.

   Step 8: Try DACS authentication
       It is possible to create accounts or identities specifically for DACS users. These
       identities are managed by the dacspasswd(1)[43] utility (there are user accounts managed
       by other DACS commands, but we will not discuss them here). Similar to Apache's
       htpasswd[44] command, these accounts are "private" in that they are unrelated to any other
       identities you might have on your system, unless you tie them together. For example, we
       can create a DACS identity named "root" that has no relationship to a Unix system's
       superuser - perhaps you are creating a DACS account for actor Stephen Root[45].

        1. We begin this step by creating an empty password file for dacspasswd (to ensure
           correct permissions). Then we create a DACS account for username "sandy".

               % install -c -g $dacsgroup -m 0660 /dev/null $la/passwd
               % $bin/dacspasswd -uj LA -q -a sandy

           You will be prompted for a password to assign to sandy's account. Choose any password
           you like as long as it is at least six characters long. You can change sandy's
           password by running this command again.

        2. Next, we edit $la/dacs.conf and add the following text in the Jurisdiction section for
           dodgers.dacstest.dss.ca:

               <Auth id="passwd">
                  URL \
               "http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/local_passwd_authenticate"
                  STYLE "pass"
                  CONTROL "sufficient"
                </Auth>

           This configuration enables authentication (see dacs_authenticate(8)[46]) for accounts
           managed by the dacspasswd utility. Check again that all files starting with
           /usr/local/dacs have appropriate permissions, as discussed earlier.

        3. We should now be able to authenticate ("login") as sandy by providing the password you
           set up earlier. If successful, your browser will be sent credentials (in an HTTP
           cookie) for the identity DACS calls LA:sandy. Note that the cookies DACS creates are
           deleted when your browser exits. Even if a cookie is not deleted, DACS credentials
           have a limited lifetime and will become useless when they expire.

           DACS comes with examples of simple HTML login pages with which you can authenticate:

               http://dodgers.dacstest.dss.ca:18123/examples/login.html

           Your browser must have JavaScript enabled to use this page. Select the jurisdiction
           (LA), enter the username (sandy) and password, and then click "Login". If all is well,
           you should see the "DACS Authentication Succeeded" page, which is the contents of
           /usr/local/dacs/www/handlers/auth_ok.html. Of course in a production environment you
           would write custom login and signout pages, or integrate the functionality with a
           portal or in whatever way you prefer for your site.

        4. Things get a bit more interesting now that you are able to authenticate. You can
           follow one link on the "DACS Authentication Succeeded" page to see your current
           credentials (using dacs_current_credentials[47]) or another to visit a page that will
           allow you to signout (dacs_signout(8)[48]) from all or some identities (you can also
           invoke dacs_signout directly[49] to signout from all identities). If you signout,
           there will be a link that you can follow to login again.

        5. Now use dacspasswd to create another account:

               % $bin/dacspasswd -uj LA -q -a don

           If you are curious, you can take a peek at the password file, which we have configured
           to be $la/passwd.

           You can now authenticate as sandy or don. You can have more than one identity active
           at the same time (i.e., you could be signed on as both sandy and don), but this is
           disallowed by default; see ACS_CREDENTIALS_LIMIT[50] and AUTH_SINGLE_COOKIE[51].

        6. Now that you're able to authenticate, let's have another try at running dacs_conf
           (recall you were not granted access to it earlier). We must first make one of the
           identities that you have created a DACS administrator identity. Edit $la/dacs.conf and
           add the following text in the Jurisdiction section for dodgers.dacstest.dss.ca (but
           not within the Auth section):

               ADMIN_IDENTITY "LA:sandy"

           As you might assume, this confers special privileges to LA:sandy.

           Authenticate as sandy using the login page and then try this link again (it should
           work this time):

               http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_conf

           If you signout[52] as sandy, then authenticate as don, and try
           http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_conf again, you should be
           denied access.

        7. In an earlier step, you created an ACL ($la/acls/acl-tutorial.0) that grants access to
           dacs_prenv to any user, whether authenticated or not. Edit that rule and replace:

               user("any")

           with:

               user("auth")

           Try invoking dacs_prenv[53] when you are not authenticated - you should be denied
           access. Now authenticate and try dacs_prenv[53] again - it should work. Edit the rule
           again and replace:

               user("auth")

           with:

               user("LA:don")

           Now you should only be granted access if you've authenticated as the DACS username
           LA:don.

   Step 9: DACS-wrapping a web service
       To use DACS to control access to a resource, there are just a few things you need to do:

       •   Make the URL space in which the resource lies within the scope of a Location[54]
           directive for the VirtualHost that corresponds to the DACS jurisdiction responsible
           for the resource.

       •   Make an appropriate DACS access control rule for the jurisdiction responsible for the
           URL space in which the resource lies.

       Basically, you have to configure Apache to allow DACS to perform access control for the
       resource, and you have to configure DACS to enforce the selective access that you want.
       This is ordinarily both easy to do and something that is done infrequently because closely
       related resources are typically grouped together within the URL space you have defined
       (for example, all image files may be collected under /images in the URL space, related
       applications are collected somewhere under /cgi-bin, and so on) and because ACLs can be
       written with wildcard patterns that will match everything "under" a given URL space
       prefix.

           Security
           It is important to verify that all resources that you intend to be DACS-wrapped really
           are access controlled and that DACS cannot be bypassed (e.g., by using different URLs
           for the same resource). For instance, despite many improvements, getting Apache's
           Virtual Hosts[55] configured exactly as you require can be challenging - make sure
           that security cannot be bypassed through selection of a particular hostname or port
           number.

           Also, note that DACS performs access control on resource names rather than on the
           resources themselves. This means that if a particular resource is known by multiple
           names, because of symbolic links, for example, then to correctly manage access to the
           resource all of its names must be DACS-wrapped.

   Step 10: What's next?
       Having successfully completed all of the previous steps, you should have a feel for some
       of the things that you can do with DACS. Of course, there's much more to DACS than what
       we've covered. You should be capable of using the system you've configured to this point
       to try some things on your own. Here are a few ideas (in order of increasing difficulty):

       •   Add a DACS-wrapped resource and experiment with access control rules. It might be a
           static web page or a CGI program. Remember that by default, your site-specific ACLs
           for the jurisdiction LA are files in the $la/acls directory. Review dacs.acls(5)[56]
           before beginning.

       •   Assign a few roles to DACS user sandy and modify an access control rule to consider
           roles when granting or denying access. Roles provide a convenient way to classify
           users so that access control rules can be concisely written to grant (or deny) access
           to a set of users that are related in some way. For example, you might assign some
           users to "students", some to "staff", and some to "faculty", and then write rules that
           reference those roles rather than individual DACS usernames. Roles only have meaning
           with respect to how they are used in ACLs, so you can make up any syntactically valid
           words you want.

           Here are some hints to get you started. You'll need to do two things: assign roles to
           users and enable roles. Once enabled, your DACS will look for roles in the file
           $la/roles. Each line of that file assigns roles to a user and consists of the
           username, a colon, and a comma-separated list of roles. For example:

               sandy:pitchers,retired-players
               don:pitchers,retired-players
               eric:pitchers,active-players
               cesar:infielders,active-players

           The other thing you'll need is some DACS configuration to enable roles. Add the
           following to the Jurisdiction section of dacs.conf:

               <Roles id="roles">
                 URL "http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/local_roles"
               </Roles>

           Now you can create rules that depend on the user making the request having certain
           roles. For example, a rule can be written to grant access to a resource only if the
           user making the request has the role "pitchers" by using the predicate (see
           dacs.exprs(5)[57]):

               user("%LA:pitchers")

           Or you can create a rule that will grant access only if the user has the roles
           "active-players" and "pitchers"; use the predicate:

               user("%LA:pitchers") and user("%LA:active-players")

       •   If you create a DACS account for a username that corresponds to a user on your system,
           you can configure DACS to assign roles to that user based on the Unix groups that she
           belongs to. This is very easy to do: instead of using local_roles as in the example
           above, use local_unix_roles instead. If you create a DACS account for alice, for
           example, and the account "alice" has group membership on your system (see group(5)),
           then alice would authenticate using her DACS password and be assigned roles from her
           Unix group membership.

           Instead of using a DACS account to authenticate alice, you can easily configure DACS
           to use alice's Unix password. The DACS module local_unix_authenticate, which must be
           installed set-uid root so that it can access passwords, provides this functionality.

       •   Add a DACS jurisdiction named NY (yankees.dacstest.dss.ca) on the same host where you
           configured dodgers.dacstest.dss.ca. You do not have to configure authentication at the
           new jurisdiction. Notice that you can authenticate at dodgers.dacstest.dss.ca and then
           access resources at yankees.dacstest.dss.ca. This is "single sign-on".

       •   Run DACS on an additional host. The procedure is basically the same as what you
           already did in this tutorial. Name the jurisdiction BOSTON and assign it the domain
           name redsox.dacstest.dss.ca. You won't be able to use the IP address 127.0.0.1 for
           this; you'll have to alias the domain names to the IP addresses of real interfaces and
           make the same changes to /etc/hosts on both hosts. You'll also have to use the
           identical federation_keyfile on both hosts (simply copy the file you've already made).

       •   Configure a different (or additional) authentication method for your jurisdiction. See
           dacs_authenticate(8)[58]. For the password style of authentication, you might try the
           NTLM authentication method. For a bit more of a challenge, see if you can make the
           expr or cert style of authentication work.

   Step 11: Clean up
       If you are done, you may want to do some clean up now. First, stop Apache:

           # /usr/local/apache-dacs/bin/apachectl stop

       Next, delete dodgers.dacstest.dss.ca and any other domain names you created for this
       exercise from /etc/hosts. Delete any groups you created. Remove /usr/local/apache-dacs,
       /usr/local/dacs, and everything underneath them.

   Troubleshooting
       The first thing to do if you encounter a problem is to check that you've got the latest
       version of DACS; a newer version might fix your problem. Also, visit the Post-Release
       Notes[59] area for your release in case a newer edition of this document is available or a
       bug fix has been posted.

       By default, the DACS log files are put in the /usr/local/dacs/logs directory. If you
       encounter any problems or just want to see what's going on, examine the log files in that
       directory. Depending on the DACS LOG_LEVEL[60] and LOG_FILTER[61] directives in effect,
       log files can quickly become big. It is safe to delete them or truncate them at any time.

       In the event of problems, you should also take a look at the Apache logs (in
       /usr/local/apache-dacs/logs).

       There are five main sources of problems:

        1. Typos (you got the spelling or punctuation incorrect, or didn't paste text correctly),

        2. File permissions are incorrect (DACS cannot read or write its files or directories),

        3. You didn't follow the instructions correctly (you skipped something or misunderstood
           something),

        4. You ran into unexpected platform dependencies, or

        5. We goofed.

       If you're sure the problem is either of the last two types, please contact us[6]. and tell
       us what happened. Be sure to mention which steps succeeded and which one failed.

SEE ALSO

       dacs(1)[62], dacsinit(1)[28], dacs.readme(7)[3], dacs.install(7)[4]

AUTHOR

       Distributed Systems Software (www.dss.ca[63])

COPYING

       Copyright2003-2013 Distributed Systems Software. See the LICENSE[64] file that accompanies
       the distribution for licensing information.

NOTES

        1. FAQ
           http://dacs.dss.ca/faq.html

        2. manual pages
           http://dacs.dss.ca/man

        3. dacs.readme(7)
           http://dacs.dss.ca/man/dacs.readme.7.html

        4. dacs.install(7)
           http://dacs.dss.ca/man/dacs.install.7.html

        5. an Apache configuration task
           http://httpd.apache.org/docs-2.2/ssl/

        6. contact us
           http://www.dss.ca/contactus.html

        7. Apache
           http://httpd.apache.org

        8. OpenSSL
           http://www.openssl.org

        9. Expat
           http://sourceforge.net/projects/expat

       10. OpenSSL
           http://dacs.dss.ca/man/dacs.install.7.html#install-openssl

       11. Expat
           http://dacs.dss.ca/man/dacs.install.7.html#install-expat

       12. detailed instructions
           http://dacs.dss.ca/man/dacs.install.7.html#install-apache

       13. VirtualHost
           http://httpd.apache.org/docs-2.2/mod/core.html#virtualhost

       14. Directory
           http://httpd.apache.org/docs-2.2/mod/core.html#directory

       15. Alias
           http://httpd.apache.org/docs-2.2/mod/mod_alias.html#alias

       16. DocumentRoot
           http://httpd.apache.org/docs-2.2/mod/core.html#documentroot

       17. netstat(1)
           http://www.freebsd.org/cgi/man.cgi?query=netstat&apropos=0&sektion=1&manpath=FreeBSD+9.1-RELEASE&format=html

       18. sockstat(1)
           http://www.freebsd.org/cgi/man.cgi?query=sockstat&apropos=0&sektion=1&manpath=FreeBSD+9.1-RELEASE&format=html

       19. Listen
           http://httpd.apache.org/docs/2.0/mod/mpm_common.html#listen

       20. User
           http://httpd.apache.org/docs-2.2/mod/mpm_common.html#user

       21. mod_suexec
           http://httpd.apache.org/docs-2.2/mod/mod_suexec.html

       22. Group
           http://httpd.apache.org/docs-2.2/mod/mpm_common.html#group

       23. group(5)
           http://www.freebsd.org/cgi/man.cgi?query=group&apropos=0&sektion=5&manpath=FreeBSD+9.1-RELEASE&format=html

       24. mod_auth_dacs
           http://dacs.dss.ca/man/mod_auth_dacs.html

       25. httpd.conf
           file:///usr/local/apache-dacs/conf/httpd.conf

       26. LoadModule
           http://httpd.apache.org/docs-2.2/mod/mod_so.html#loadmodule

       27. dacs.conf(5)
           http://dodgers.dacstest.dss.ca:18123/man/dacs.conf.5.html

       28. dacsinit(1)
           http://dacs.dss.ca/man/dacsinit.1.html

       29. Initial Configuration
           http://dacs.dss.ca/man/dacs.install.7.html#initial_config

       30. earlier
           http://dacs.dss.ca/man/#var-defs

       31. SECURE_MODE
           http://dacs.dss.ca/man/dacs.conf.5.html#SECURE_MODE

       32. dacs.groups(5)
           http://dacs.dss.ca/man/dacs.groups.5.html#dacs_metadata

       33. dacsconf(1)
           http://dodgers.dacstest.dss.ca:18123/man/dacsconf.1.html

       34. dacskey(1)
           http://dodgers.dacstest.dss.ca:18123/man/dacskey.1.html

       35. dacs_acs(8)
           http://dodgers.dacstest.dss.ca:18123/man/dacs_acs.8.html

       36. http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_prenv
           http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_prenv?FORMAT=html

       37. ACS_ERROR_HANDLER
           http://dacs.dss.ca/man/dacs.conf.5.html#ACS_ERROR_HANDLER

       38. dacs_acs(8)
           http://dacs.dss.ca/man/dacs_acs.8.html#exported_envars

       39. dacs_version(8)
           http://dodgers.dacstest.dss.ca:18123/man/dacs_version.8.html

       40. dacs_list_jurisdictions(8)
           http://dodgers.dacstest.dss.ca:18123/man/dacs_list_jurisdictions.8.html

       41. dacs.acls(5)
           http://dodgers.dacstest.dss.ca:18123/man/dacs.acls.5.html

       42. dacs.exprs(5)
           http://dodgers.dacstest.dss.ca:18123/man/dacs.exprs.5.html

       43. dacspasswd(1)
           http://dodgers.dacstest.dss.ca:18123/man/dacspasswd.1.html

       44. htpasswd
           http://httpd.apache.org/docs-2.2/programs/htpasswd.html

       45. Stephen Root
           http://us.imdb.com/name/nm0740535/

       46. dacs_authenticate(8)
           http://dodgers.dacstest.dss.ca:18123/man/dacs_authenticate.8.html

       47. dacs_current_credentials
           http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_current_credentials

       48. dacs_signout(8)
           http://dodgers.dacstest.dss.ca:18123/man/dacs_signout.8.html

       49. invoke dacs_signout directly
           http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_signout

       50. ACS_CREDENTIALS_LIMIT
           http://dacs.dss.ca/man/dacs.conf.5.html#ACS_CREDENTIALS_LIMIT

       51. AUTH_SINGLE_COOKIE
           http://dacs.dss.ca/man/dacs.conf.5.html#AUTH_SINGLE_COOKIE

       52. signout
           http://dodgers.dacstest.dss.ca:18123/examples/signout.html

       53. dacs_prenv
           http://dodgers.dacstest.dss.ca:18123/cgi-bin/dacs/dacs_prenv

       54. Location
           http://httpd.apache.org/docs-2.2/mod/core.html#location

       55. Virtual Hosts
           http://httpd.apache.org/docs/2.2/vhosts/

       56. dacs.acls(5)
           http://dacs.dss.ca/man/dacs.acls.5.html

       57. dacs.exprs(5)
           http://dacs.dss.ca/man/dacs.exprs.5.html

       58. dacs_authenticate(8)
           http://dacs.dss.ca/man/dacs_authenticate.8.html

       59. Post-Release Notes
           http://dacs.dss.ca/download.html

       60. LOG_LEVEL
           http://dacs.dss.ca/man/dacs.conf.5.html#LOG_LEVEL

       61. LOG_FILTER
           http://dacs.dss.ca/man/dacs.conf.5.html#LOG_FILTER

       62. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html

       63. www.dss.ca
           http://www.dss.ca

       64. LICENSE
           http://dacs.dss.ca/man/../misc/LICENSE