Provided by: dhcpcd5_6.10.1-1_amd64 bug

NAME

     dhcpcd-run-hooks — DHCP client configuration script

DESCRIPTION

     dhcpcd-run-hooks is used by dhcpcd(8) to run any system and user defined hook scripts.
     System hook scripts are found in /lib/dhcpcd/dhcpcd-hooks and the user defined hooks are
     /etc/dhcpcd.enter-hook.  and /etc/dhcpcd.exit-hook.  The default install supplies hook
     scripts for configuring /etc/resolv.conf and the hostname.  Your distribution may have
     included other hook scripts to say configure ntp or ypbind.  A test hook is also supplied
     that simply echos the dhcp variables to the console from DISCOVER message.

     Each time dhcpcd-run-hooks is invoked, $interface is set to the interface that dhcpcd is run
     on and $reason is to the reason why dhcpcd-run-hooks was invoked.  DHCP information to be
     configured is held in variables starting with the word new_ and old DHCP information to be
     removed is held in variables starting with the word old_.  dhcpcd can display the full list
     of variables it knows how about by using the -V, --variables argument.

     Here's a list of reasons why dhcpcd-run-hooks could be invoked:

     PREINIT           dhcpcd is starting up and any pre-initialisation should be done.

     CARRIER           dhcpcd has detected the carrier is up.  This is generally just a
                       notification and no action need be taken.

     NOCARRIER         dhcpcd lost the carrier.  The cable may have been unplugged or association
                       to the wireless point lost.

     INFORM | INFORM6  dhcpcd informed a DHCP server about it's address and obtained other
                       configuration details.

     BOUND | BOUND6    dhcpcd obtained a new lease from a DHCP server.

     RENEW | RENEW6    dhcpcd renewed it's lease.

     REBIND | REBIND6  dhcpcd has rebound to a new DHCP server.

     REBOOT | REBOOT6  dhcpcd successfully requested a lease from a DHCP server.

     DELEGATED6        dhcpcd assigned a delegated prefix to the interface.

     IPV4LL            dhcpcd obtaind an IPV4LL address, or one was removed.

     STATIC            dhcpcd has been configured with a static configuration which has not been
                       obtained from a DHCP server.

     3RDPARTY          dhcpcd is monitoring the interface for a 3rd party to give it an IP
                       address.

     TIMEOUT           dhcpcd failed to contact any DHCP servers but was able to use an old
                       lease.

     EXPIRE | EXPIRE6  dhcpcd's lease or state expired and it failed to obtain a new one.

     NAK               dhcpcd received a NAK from the DHCP server.  This should be treated as
                       EXPIRE.

     RECONFIGURE       dhcpcd has been instructed to reconfigure an interface.

     ROUTERADVERT      dhcpcd has received an IPv6 Router Advertisement, or one has expired.

     STOP | STOP6      dhcpcd stopped running on the interface.

     STOPPED           dhcpcd has stopped entirely.

     DEPARTED          The interface has been removed.

     FAIL              dhcpcd failed to operate on the interface.  This normally happens when
                       dhcpcd does not support the raw interface, which means it cannot work as a
                       DHCP or ZeroConf client.  Static configuration and DHCP INFORM is still
                       allowed.

     DUMP              dhcpcd has been asked to dump the last lease for the interface.

     TEST              dhcpcd received an OFFER from a DHCP server but will not configure the
                       interface.  This is primarily used to test the variables are filled
                       correctly for the script to process them.

ENVIRONMENT

     dhcpcd will clear the environment variables aside from $PATH and $RC_SVCNAME.  The following
     variables will then be set, along with any protocol supplied ones.

     $interface                   the name of the interface.

     $reason                      as described above.

     $pid                         the pid of dhcpcd.

     $ifcarrier                   the link status of $interface: unknown, up or down.

     $ifmetric                    $interface preference, lower is better.

     $ifwireless                  1 if $interface is wireless, otherwise 0.

     $ifflags                     $interface flags.

     $ifmtu                       $interface MTU.

     $ifssid                      the name of the SSID the interface is connected to.

     $interface_order             A list of interfaces, in order of preference.

     $if_up                       true if the interface is up, otherwise false.

     $if_down                     true if the interface is down, otherwise false.

     $af_waiting                  Address family waiting for, as defined in dhcpcd.conf(5).

     $profile                     the name of the profile selected from dhcpcd.conf(5).

     $new_delegated_dhcp6_prefix  space separated list of delegated prefixes.

FILES

     When dhcpcd-run-hooks runs, it loads /etc/dhcpcd.enter-hook and any scripts found in
     /lib/dhcpcd/dhcpcd-hooks in a lexical order and then finally /etc/dhcpcd.exit-hook

SEE ALSO

     dhcpcd(8)

AUTHORS

     Roy Marples <roy@marples.name>

BUGS

     Please report them to http://roy.marples.name/projects/dhcpcd

SECURITY CONSIDERATIONS

     dhcpcd will validate the content of each option against its encoding.  For string, ascii,
     raw or binhex encoding it's up to the user to validate it for the intended purpose.

     When used in a shell script, each variable must be quoted correctly.