Provided by: pump_0.8.24-7_amd64 bug

NAME

       pump - configure network interface via BOOTP or DHCP protocol

SYNOPSIS

       pump  [-krRsd]  [-c|--config-file  FILE]  [-h|--hostname  HOSTNAME] [-i|--interface IFACE]
       [-l|--lease   HOURS]    [-m|--route-metric    METRIC]    [--lookup-hostname]    [--no-dns]
       [--no-gateway]   [--no-ntp]   [--no-setup]   [--release]   [--renew]  [--script=  ISCRIPT]
       [--status] [--win-client-ident]

       pump [-?|--help] [--usage]

DESCRIPTION

       pump is a daemon that manages network interfaces that are controlled by either the DHCP or
       BOOTP protocol.

       While  pump  may  be started manually, it is normally started automatically by ifup(8) for
       devices configured via BOOTP or DHCP.

       If pump is managing an interface, you can run  it  again  to  query  the  status  of  that
       interface.  For example,
           pump -i eth0 --status
       will print the current status of device eth0.

COMMAND LINE OPTIONS

       switch   long option             description
       -?       --help                  Show this help message
       -c       --config-file=FILE      Get configuration from FILE instead of /etc/pump.conf
       -d       --no-dns                Don't update DNS resolver configuration
       -h       --hostname=HOSTNAME     Request HOSTNAME
       -i       --interface=IFACE       Manage IFACE rather than eth0
                --keep-up               Keep the interface up when released
       -k       --kill                  Kill daemon (and disable all interfaces)
       -l       --lease=HOURS           Request least time of HOURS
                --lookup-hostname       Look up hostname in DNS
       -R       --renew                 Renew lease immediately
       -r       --release               Release interface
       -m       --route-metric=METRIC   Metric to use on routes (normally 0)
                --no-gateway            Don't configure a default route for this interface
                --no-resolvconf         Don't use the resolvconf program to update resolv.conf
                --no-ntp                Don't update ntp.conf
                --no-setup              Don't set up anything
                --script=SCRIPT         Call SCRIPT (or null string to disable)
       -s       --status                Display interface status
                --usage                 Display a brief usage message
                --win-client-ident      Specify a Windows(tm)-like client identifier

OPTION NOTES

       The  --lookup-hostname  option causes pump to ignore the host and domain names returned by
       the server and instead to look these up in DNS using the IP address of the interface.  The
       name  that is looked up is used in forming the search line in the resolv.conf file.  Thus,
       if either the --no-dns or domainsearch  option  is  used  then  --lookup-hostname  has  no
       effect.

       Note that pump itself never sets the computer's hostname.

CONFIGURATION FILE

       You  can  tune  the  behavior  of  pump using a configuration file.  By default pump reads
       /etc/pump.conf but you can change this using the --config-file option.

       The configuration file is line-oriented.  Most lines contain a directive followed by  zero
       or  more  arguments.   Arguments  are  handled  similarly  to  how  shells  handle command
       arguments, allowing the use of quotes and backslash escapes.  Comments  are  allowed,  and
       must begin with a # character.  Spaces and tabs are ignored.

       Directives  may be specified at two levels: global and specific.  Global directives change
       pump's behavior for all of the devices that it manages whereas specific directives  change
       pump's behavior for a single device.  Later directives always override earlier ones.

       Here is an example configuration file:

       # sample /etc/pump.conf file

       domainsearch "my.own.org own.org at.work.com"
       retries 3

       device eth1 {
           nodns
       }

       This  configuration file tells pump to use a specific DNS search path rather than deriving
       one from the DHCP or BOOTP server response, to retry each request 3 times (for a total  of
       4  tries),  and  not  to  change the DNS configuration file when it's configuring the eth1
       device.

       Here is a complete list of directives:

       device DEVICE
              Specify specific directives for DEVICE. This directive must be followed by a {, and
              the  list  of  specific  directives  must  end  with  a  }  on its own line.  These
              directives may not be nested.

       domainsearch SEARCHPATH
              Use SEARCHPATH as the DNS search path instead of the domain name  returned  by  the
              server or the domain part of the fully qualified hostname.

       keepup Keep  the interface up when released.  Normally pump brings the interface down when
              it releases its lease, but some daemons such as  ifplugd  or  wpa_supplicant  still
              need the interface to be up so that they can still work.

       nonisdomain
              Don't  set  the  NIS  domain.  Normally pump sets the system's NIS domain if an NIS
              domain is specified by the DHCP server and the  current  NIS  domain  is  empty  or
              localdomain.

       nodns  Don't update /etc/resolv.conf when the interface is configured.

       nogateway
              Ignore  any default gateway suggested by the DHCP server for this device.  This can
              be useful on machines with multiple devices.

       nontp  Don't update /etc/ntp.conf when the interface is configured.

       nosetup
              Don't set up anything on the local machine as a result of  DHCP  operations.   This
              implies  nodns,  nonisdomain,  nogateway  and  nontp.   This  option is useful, for
              example, if you want to perform setup in customised scripts.

       noresolvconf
              Don't use the  resolvconf  program  to  update  /etc/resolv.conf;  instead,  update
              /etc/resolv.conf directly.  (This option is only relevant if --nodns is not used.)

       retries COUNT
              Retry each phase of the DHCP process COUNT times.

       timeout COUNT
              Don't let any one step of the DHCP process take more then COUNT seconds.

       script FILE

              Condition   arg1      arg2   arg3
              lease       up        eth0   1.2.3.4
              renewal     renewal   eth0   2.3.4.5
              release     down      eth0

              When  events  occur  in  negotiation  with  the  server,  call the executable FILE.
              Scripts are called when a lease is granted, when a renewal is negotiated, and  when
              the  interface is brought down and the address released.  The script is called with
              two or three arguments, depending on the condition,  as  documented  in  the  table
              above.

LOGGING

       The  program logs a good deal of information to syslog, much of it at the DEBUG level.  If
       you're having trouble, it's a good idea to turn up syslog's logging level.

BUGS

       At startup pump tries to detect whether another instance of itself  is  running.   If  the
       UNIX  domain socket (normally /var/run/pump.sock) does not exist, pump tries to connect to
       tcp/127.0.0.1:68.  If it is also unreachable (possibly due to packet filtering), pump will
       issue a warning to stderr and assume that there is no instance of itself running.

       Probably  limited to Ethernet, might work on PLIP, probably not ARCnet and Token Ring. The
       configuration file should let you do more things.

       Submit bug reports at the Bug Track link at http://developer.redhat.com/

QUIBBLE

       A pump, like a boot[p], is something you wear on your foot.  Some of us like the  name  (I
       know, hard to believe)!