xenial (1) ao-rawload.1.gz

NAME

       ao-rawload - flash a program to a AltOS device

SYNOPSIS

       ao-rawload [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] file.ihx

DESCRIPTION

       ao-rawload  loads  the  specified  .ihx  file,  without modification, into the target device flash or ram
       (depending on the base address of the .ihx file).

OPTIONS

       -T tty-device | --tty tty-device
              This selects which tty device the debugger uses to communicate with the target device. The special
              name  'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial
              port connected to a suitable cc1111 debug node.

       -D AltOS-device | --device AltOS-device
              Search for a connected device. This requires an argument of one of the following forms:

              TeleMetrum:2
              TeleMetrum
              2

              Leaving out the product name will cause the tool to select a suitable  product,  leaving  out  the
              serial number will cause the tool to match one of the available devices.

       -r | --run
              After  the  file has been loaded, set the PC to the base address of the image and resume execution
              there.  the .ihx file.

USAGE

       ao-rawload reads the specified .ihx file into memory. It then connects to the specified target device and
       writes the program to the target device memory and, optionally, starts the program executing.

AUTHOR

       Keith Packard

                                                   ao-rawload                                      AO-RAWLOAD(1)