Provided by: ion_3.2.1+dfsg-1_amd64 
NAME
bptrace - Bundle Protocol (BP) network trace utility
SYNOPSIS
bptrace own_endpoint_ID destination_endpoint_ID report-to_endpoint_ID TTL class_of_service "trace_text"
[status_report_flags]
DESCRIPTION
bptrace uses bp_send() to issue a single bundle to a designated destination endpoint, with status
reporting options enabled as selected by the user, then terminates. The status reports returned as the
bundle makes its way through the network provide a view of the operation of the network as currently
configured.
TTL indicates the number of seconds the trace bundle may remain in the network, undelivered, before it is
automatically destroyed.
class_of_service is custody-requested.priority[.ordinal[.unreliable.critical[.flow-label]]], where
custody-requested must be 0 or 1 (Boolean), priority must be 0 (bulk) or 1 (standard) or 2 (expedited),
ordinal must be 0-254, unreliable must be 0 or 1 (Boolean), critical must also be 0 or 1 (Boolean), and
flow-label may be any unsigned integer. ordinal is ignored if priority is not 2. Setting
class_of_service to "0.2.254" or "1.2.254" gives a bundle the highest possible priority. Setting
unreliable to 1 causes BP to forego retransmission in the event of data loss, both at the BP layer and at
the convergence layer. Setting critical to 1 causes contact graph routing to forward the bundle on all
plausible routes rather than just the "best" route it computes; this may result in multiple copies of the
bundle arriving at the destination endpoint, but when used in conjunction with priority 2.254 it ensures
that the bundle will be delivered as soon as physically possible.
trace_text can be any string of ASCII text; alternatively, if we want to send a file, it can be "@"
followed by the file name.
status_report_flags must be a sequence of status report flags, separated by commas, with no embedded
whitespace. Each status report flag must be one of the following: rcv, ct, fwd, dlv, del.
EXIT STATUS
"0" bptrace has terminated.
FILES
No configuration files are needed.
ENVIRONMENT
No environment variables apply.
DIAGNOSTICS
The following diagnostics may be issued to the ion.log log file:
bptrace can't attach to BP.
bpadmin has not yet initialized BP operations.
bptrace can't open own endpoint.
Another BP application task currently has own_endpoint_ID open for bundle origination and reception.
Try again after that task has terminated. If no such task exists, it may have crashed while still
holding the endpoint open; the easiest workaround is to select a different source endpoint.
No space for bptrace text.
Probably an unrecoverable database error, in which case the local ION node must be terminated and re-
initialized.
bptrace can't create ZCO.
Probably an unrecoverable database error, in which case the local ION node must be terminated and re-
initialized.
bptrace can't send message.
BP system error. Check for earlier diagnostic messages describing the cause of the error; correct
problem and rerun.
BUGS
Report bugs to <ion-bugs@korgano.eecs.ohiou.edu>
SEE ALSO
bp(3)