Provided by: libjpeg-turbo-progs_1.4.2-0ubuntu3.4_amd64 
NAME
djpeg - decompress a JPEG file to an image file
SYNOPSIS
djpeg [ options ] [ filename ]
DESCRIPTION
djpeg decompresses the named JPEG file, or the standard input if no file is named, and produces an image
file on the standard output. PBMPLUS (PPM/PGM), BMP, GIF, Targa, or RLE (Utah Raster Toolkit) output
format can be selected. (RLE is supported only if the URT library is available.)
OPTIONS
All switch names may be abbreviated; for example, -grayscale may be written -gray or -gr. Most of the
"basic" switches can be abbreviated to as little as one letter. Upper and lower case are equivalent
(thus -BMP is the same as -bmp). British spellings are also accepted (e.g., -greyscale), though for
brevity these are not mentioned below.
The basic switches are:
-colors N
Reduce image to at most N colors. This reduces the number of colors used in the output image, so
that it can be displayed on a colormapped display or stored in a colormapped file format. For
example, if you have an 8-bit display, you'd need to reduce to 256 or fewer colors.
-quantize N
Same as -colors. -colors is the recommended name, -quantize is provided only for backwards
compatibility.
-fast Select recommended processing options for fast, low quality output. (The default options are
chosen for highest quality output.) Currently, this is equivalent to -dct fast -nosmooth -onepass
-dither ordered.
-grayscale
Force grayscale output even if JPEG file is color. Useful for viewing on monochrome displays;
also, djpeg runs noticeably faster in this mode.
-rgb Force RGB output even if JPEG file is grayscale.
-scale M/N
Scale the output image by a factor M/N. Currently the scale factor must be M/8, where M is an
integer between 1 and 16 inclusive, or any reduced fraction thereof (such as 1/2, 3/4, etc.)
Scaling is handy if the image is larger than your screen; also, djpeg runs much faster when
scaling down the output.
-bmp Select BMP output format (Windows flavor). 8-bit colormapped format is emitted if -colors or
-grayscale is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color format is
emitted.
-gif Select GIF output format. Since GIF does not support more than 256 colors, -colors 256 is assumed
(unless you specify a smaller number of colors).
-os2 Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is emitted if -colors or
-grayscale is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color format is
emitted.
-pnm Select PBMPLUS (PPM/PGM) output format (this is the default format). PGM is emitted if the JPEG
file is grayscale or if -grayscale is specified; otherwise PPM is emitted.
-rle Select RLE output format. (Requires URT library.)
-targa Select Targa output format. Grayscale format is emitted if the JPEG file is grayscale or if
-grayscale is specified; otherwise, colormapped format is emitted if -colors is specified;
otherwise, 24-bit full-color format is emitted.
Switches for advanced users:
-dct int
Use integer DCT method (default).
-dct fast
Use fast integer DCT (less accurate). In libjpeg-turbo, the fast method is generally about 5-15%
faster than the int method when using the x86/x86-64 SIMD extensions (results may vary with other
SIMD implementations, or when using libjpeg-turbo without SIMD extensions.) If the JPEG image was
compressed using a quality level of 85 or below, then there should be little or no perceptible
difference between the two algorithms. When decompressing images that were compressed using
quality levels above 85, however, the difference between the fast and int methods becomes more
pronounced. With images compressed using quality=97, for instance, the fast method incurs
generally about a 4-6 dB loss (in PSNR) relative to the int method, but this can be larger for
some images. If you can avoid it, do not use the fast method when decompressing images that were
compressed using quality levels above 97. The algorithm often degenerates for such images and can
actually produce a more lossy output image than if the JPEG image had been compressed using lower
quality levels.
-dct float
Use floating-point DCT method. The float method is mainly a legacy feature. It does not produce
significantly more accurate results than the int method, and it is much slower. The float method
may also give different results on different machines due to varying roundoff behavior, whereas
the integer methods should give the same results on all machines.
-dither fs
Use Floyd-Steinberg dithering in color quantization.
-dither ordered
Use ordered dithering in color quantization.
-dither none
Do not use dithering in color quantization. By default, Floyd-Steinberg dithering is applied when
quantizing colors; this is slow but usually produces the best results. Ordered dither is a
compromise between speed and quality; no dithering is fast but usually looks awful. Note that
these switches have no effect unless color quantization is being done. Ordered dither is only
available in -onepass mode.
-map file
Quantize to the colors used in the specified image file. This is useful for producing multiple
files with identical color maps, or for forcing a predefined set of colors to be used. The file
must be a GIF or PPM file. This option overrides -colors and -onepass.
-nosmooth
Use a faster, lower-quality upsampling routine.
-onepass
Use one-pass instead of two-pass color quantization. The one-pass method is faster and needs less
memory, but it produces a lower-quality image. -onepass is ignored unless you also say -colors N.
Also, the one-pass method is always used for grayscale output (the two-pass method is no
improvement then).
-maxmemory N
Set limit for amount of memory to use in processing large images. Value is in thousands of bytes,
or millions of bytes if "M" is attached to the number. For example, -max 4m selects 4000000
bytes. If more space is needed, temporary files will be used.
-outfile name
Send output image to the named file, not to standard output.
-memsrc
Load input file into memory before decompressing. This feature was implemented mainly as a way of
testing the in-memory source manager (jpeg_mem_src().)
-verbose
Enable debug printout. More -v's give more output. Also, version information is printed at
startup.
-debug Same as -verbose.
-version
Print version information and exit.
EXAMPLES
This example decompresses the JPEG file foo.jpg, quantizes it to 256 colors, and saves the output in
8-bit BMP format in foo.bmp:
djpeg -colors 256 -bmp foo.jpg > foo.bmp
HINTS
To get a quick preview of an image, use the -grayscale and/or -scale switches. -grayscale -scale 1/8 is
the fastest case.
Several options are available that trade off image quality to gain speed. -fast turns on the recommended
settings.
-dct fast and/or -nosmooth gain speed at a small sacrifice in quality. When producing a color-quantized
image, -onepass -dither ordered is fast but much lower quality than the default behavior. -dither none
may give acceptable results in two-pass mode, but is seldom tolerable in one-pass mode.
If you are fortunate enough to have very fast floating point hardware, -dct float may be even faster than
-dct fast. But on most machines -dct float is slower than -dct int; in this case it is not worth using,
because its theoretical accuracy advantage is too small to be significant in practice.
ENVIRONMENT
JPEGMEM
If this environment variable is set, its value is the default memory limit. The value is
specified as described for the -maxmemory switch. JPEGMEM overrides the default value specified
when the program was compiled, and itself is overridden by an explicit -maxmemory.
SEE ALSO
cjpeg(1), jpegtran(1), rdjpgcom(1), wrjpgcom(1)
ppm(5), pgm(5)
Wallace, Gregory K. "The JPEG Still Picture Compression Standard", Communications of the ACM, April 1991
(vol. 34, no. 4), pp. 30-44.
AUTHOR
Independent JPEG Group
This file was modified by The libjpeg-turbo Project to include only information relevant to libjpeg-
turbo, to wordsmith certain sections, and to describe features not present in libjpeg.
BUGS
To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These are larger than they should
be, but are readable by standard GIF decoders.
21 November 2014 DJPEG(1)