Provided by: tstools_1.11-1ubuntu1_amd64 
NAME
esfilter - Output a filtered or truncated version of a ES
SYNOPSIS
esfilter [actions/switches] <infile> <outfile>
DESCRIPTION
TS tools version 1.11, esfilter built Nov 11 2008 17:15:39
Output a filtered or truncated version of an elementary stream. The input is
either H.264 (MPEG-4/AVC) or H.262 (MPEG-2). The output is either an elementary
stream, or an H.222 transport stream
If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
and video PID (0x68) are used.
Files:
<infile>
is the input elementary stream (but see -stdin below).
<outfile> is the output stream, either an equivalent elementary
stream, or an H.222 Transport Stream (but see -stdout and -host below).
Actions:
-copy Copy the input data to the output file (mostly useful as a way of truncating data
with -max)
-filter
Filter data from input to output, aiming to keep every <n>th frame (where <n> is
specified by -freq).
-strip For H.264, output just the IDR and I pictures, for H.262, output just the I
pictures, but see -allref below.
Switches:
-verbose, -v
Output extra (debugging) messages
-quiet, -q
Only output error messages
-stdin Take input from <stdin>, instead of a named file
-stdout
Write output to <stdout>, instead of a named file Forces -quiet.
-host <host>, -host <host>:<port>
Writes output (over TCP/IP) to the named <host>, instead of to a named file. If
<port> is not specified, it defaults to 88. Implies -tsout.
-max <n>, -m <n>
Maximum number of frames to read (for -filter and -strip), or ES units/NAL units
(for -copy).
-freq <n>
Specify the frequency of frames to try to keep with -filter. Defaults to 8.
-allref
With -strip, keep all reference pictures (H.264) or all I and P pictures (H.262)
-tsout Output data as Transport Stream PES packets (the default is as Elementary Stream)
-pes, -ts
The input file is TS or PS, to be read via the PES->ES reading mechanisms. Not
allowed with -stdin.
Stream type:
If input is from a file, then the program will look at the start of the file to
determine if the stream is H.264 or H.262 data. This process may occasionally come
to the wrong conclusion, in which case the user can override the choice using the
following switches.
If input is from standard input (via -stdin), then it is not possible for the
program to make its own decision on the input stream type. Instead, it defaults to
H.262, and relies on the user indicating if this is wrong.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
TS tools version 1.11, esfilter built Nov 11 2008 17:15:39
Output a filtered or truncated version of an elementary stream. The input is
either H.264 (MPEG-4/AVC) or H.262 (MPEG-2). The output is either an elementary
stream, or an H.222 transport stream
If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
and video PID (0x68) are used.
Files:
<infile>
is the input elementary stream (but see -stdin below).
<outfile> is the output stream, either an equivalent elementary
stream, or an H.222 Transport Stream (but see -stdout and -host below).
Actions:
-copy Copy the input data to the output file (mostly useful as a way of truncating data
with -max)
-filter
Filter data from input to output, aiming to keep every <n>th frame (where <n> is
specified by -freq).
-strip For H.264, output just the IDR and I pictures, for H.262, output just the I
pictures, but see -allref below.
Switches:
-verbose, -v
Output extra (debugging) messages
-quiet, -q
Only output error messages
-stdin Take input from <stdin>, instead of a named file
-stdout
Write output to <stdout>, instead of a named file Forces -quiet.
-host <host>, -host <host>:<port>
Writes output (over TCP/IP) to the named <host>, instead of to a named file. If
<port> is not specified, it defaults to 88. Implies -tsout.
-max <n>, -m <n>
Maximum number of frames to read (for -filter and -strip), or ES units/NAL units
(for -copy).
-freq <n>
Specify the frequency of frames to try to keep with -filter. Defaults to 8.
-allref
With -strip, keep all reference pictures (H.264) or all I and P pictures (H.262)
-tsout Output data as Transport Stream PES packets (the default is as Elementary Stream)
-pes, -ts
The input file is TS or PS, to be read via the PES->ES reading mechanisms. Not
allowed with -stdin.
Stream type:
If input is from a file, then the program will look at the start of the file to
determine if the stream is H.264 or H.262 data. This process may occasionally come
to the wrong conclusion, in which case the user can override the choice using the
following switches.
If input is from standard input (via -stdin), then it is not possible for the
program to make its own decision on the input stream type. Instead, it defaults to
H.262, and relies on the user indicating if this is wrong.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
SEE ALSO
The full documentation for esfilter is maintained as a Texinfo manual. Please check
http://tstools.berlios.de for more information.