NAME

       lshw - list hardware

SYNOPSIS

       lshw [ -version ]

       lshw [ -help ]

       lshw [ -X ]

       lshw [  [ -html ]  [ -short ]  [ -xml ]  [ -json ]  [ -businfo ]  ]  [ -dump filename ]  [
       -class class... ]  [ -disable test... ]  [ -enable test... ]  [ -sanitize ]  [ -numeric  ]
       [ -quiet ]

DESCRIPTION

       lshw  is a small tool to extract detailed information on the hardware configuration of the
       machine.  It  can  report  exact  memory  configuration,   firmware   version,   mainboard
       configuration,  CPU version and speed, cache configuration, bus speed, etc. on DMI-capable
       x86 or IA-64 systems and on some PowerPC machines (PowerMac G4 is known to work).

       It currently supports DMI (x86 and IA-64 only), OpenFirmware device tree  (PowerPC  only),
       PCI/AGP, CPUID (x86), IDE/ATA/ATAPI, PCMCIA (only tested on x86), SCSI and USB.

       -version
              Displays the version of lshw and exits.

       -help  Displays the available command line options and quits.

       -X     Launch the X11 GUI (if available).

       -html  Outputs the device tree as an HTML page.

       -xml   Outputs the device tree as an XML tree.

       -json  Outputs the device tree as a JSON object (JavaScript Object Notation).

       -short Outputs  the  device  tree showing hardware paths, very much like the output of HP-
              UX's ioscan.

       -businfo
              Outputs the device list showing bus information, detailing SCSI, USB, IDE  and  PCI
              addresses.

       -dump filename
              Dump collected information into a file (SQLite database).

       -class class
              Only show the given class of hardware. class can be found using lshw -short or lshw
              -businfo.

       -C class
              Alias for -class class.

       -enable test

       -disable test
              Enables or disables a test. test can be dmi (for  DMI/SMBIOS  extensions),  device-
              tree  (for  OpenFirmware  device  tree),  spd  (for memory Serial Presence Detect),
              memory (for memory-size guessing  heuristics),  cpuinfo  (for  kernel-reported  CPU
              detection),  cpuid  (for  CPU detection), pci (for PCI/AGP access), isapnp (for ISA
              PnP extensions), pcmcia (for PCMCIA/PCCARD), ide  (for  IDE/ATAPI),  usb  (for  USB
              devices),scsi (for SCSI) or network (for network interfaces detection).

       -quiet Don't display status.

       -sanitize
              Remove potentially sensitive information from output (IP addresses, serial numbers,
              etc.).

       -numeric
              Also display numeric IDs (for PCI and USB devices).

BUGS

       lshw currently does not detect Firewire(IEEE1394) devices.

       Not all architectures supported by GNU/Linux are fully supported (e.g.  CPU detection).

       "Virtual" SCSI interfaces used for SCSI emulation over IDE are not reported correctly yet.

NOTES

       lshw must be run as super user or it will only report partial information.

FILES

       /usr/local/share/pci.ids

       /usr/share/pci.ids

       /etc/pci.ids

       /usr/share/hwdata/pci.ids
              A list of all known PCI ID's (vendors, devices, classes and subclasses).

       /proc/bus/pci/*
              Used to access the configuration of installed PCI busses and devices.

       /proc/ide/*
              Used to access the configuration of installed IDE busses and devices.

       /proc/scsi/*, /dev/sg*
              Used to access the configuration of installed SCSI devices.

       /dev/cpu/*/cpuid
              Used on x86 platforms to access CPU-specific configuration.

       /proc/device-tree/*
              Used on PowerPC platforms to access OpenFirmware configuration.

       /proc/bus/usb/*
              Used to access the configuration of installed USB busses and devices.

       /sys/* Used on 2.6 kernels to access hardware/driver configuration information.

EXAMPLES

       lshw -short
              Lists hardware in a compact format.

       lshw -class disk -class storage
              Lists all disks and storage controllers in the system.

       lshw -html -class network
              Lists all network interfaces in HTML.

       lshw -disable dmi
              Don't use DMI to detect hardware.

SEE ALSO

       /proc/*, linuxinfo(1), lspci(8), lsusb(8)

COPYING

       lshw is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) version 2.

AUTHOR

       lshw is maintained by Lyonel Vincent <lyonel@ezix.org>.

OTHER INFO

       The webpage for lshw is at
        <URL:http://lshw.org/>

$Rev: 2179 $                               30 May 2010                                    LSHW(1)