NAME

       morse_sync - Tool to synchronize the MORSE simulator

SYNOPSIS

       morse_sync [-h] [-d] [-H host] [-P port] [-t timeout]  -p <period>

DESCRIPTION

       morse_sync  is a tool which sends a periodic signal to the Morse simulator, allowing to synchronize it to
       an external clock. It relies on the socket synchronisation protocol of Morse.

       Moreover, morse_sync reads command on its input. It accepts the following commands:

       quit   End the morse_sync tool

       set_period <period>
              Change the period of message sent

OPTIONS

       -d, --debug
              Enable debug information

       -H, --host <host>
              Configure the host where Morse is running

       -P, --port <port>
              Configure the port of the synchronisation socket of Morse

       -p, --period <period>
              Configure the period (in sec) to which the signal is sent to Morse

       -h, --help
              Displays information regarding the program use.

       -t, --timeout <timeout>
              Configure time (in sec) during morse_sync tries to connect to the Morse synchronisation socket. It
              is particularly useful to handle delay in the Morse initialisation. The default value is 10 sec.

SEE ALSO

       morse(1)

COPYRIGHT

       Copyright (c) 2009-2010 ONERA Copyright (c) 2009-2016  LAAS-CNRS  Copyright  (c)  2015-2016  ISAE-SUPAERO
       Copyright held by the MORSE authors or the institutions employing them, refer to the AUTHORS file for the
       list.  The  list  of  the  contributors  to  each  file can be obtained from the commit history ('git log
       <file>').

UNKNOWN-dirty                                   February 17, 2016                                  MORSE_SYNC(1)