NAME

       nvme-fw-download - Download all or a portion of an nvme firmware image.

SYNOPSIS

       nvme fw-download <device> [--fw=<firmware-file> | -f <firmware-file>]
                           [--xfer=<transfer-size> | -x <transfer-size>]
                           [--offset=<offset> | -o <offset>]

DESCRIPTION

       The Firmware Image Download command is used to download all or a portion of the firmware
       image for a future update to the controller. The Firmware Image Download command may be
       submitted while other commands on the Admin Submission Queue or I/O Submission Queues are
       outstanding. The Firmware Image Download command copies the new firmware image (in whole
       or in part) to the controller.

       The firmware image may be constructed of multiple pieces that are individually downloaded
       with separate Firmware Image Download commands. Each Firmware Image Download command
       includes a Dword Offset and Number of Dwords that specify a Dword range. The host software
       shall ensure that firmware pieces do not have Dword ranges that overlap. Firmware portions
       may be submitted out of order to the controller.

       The new firmware image is not applied as part of the Firmware Image Download command. It
       is applied following a reset, where the image to apply and the firmware slot it should be
       committed to is specified with the Firmware Activate command.

OPTIONS

       -f <firmware-file>, --fw=<firmeware-file>
           Required argument. This specifies the path to the device’s firmware file on your
           system that will be read by the program and sent to the device.

       -x <transfer-size>, --xfer=<transfer-size>
           This specifies the size to split each transfer. This is useful if the device has a max
           transfer size requirement for firmware. It defaults to 4k.

       -o <offset>, --offset=<offset>
           This specifies the starting offset in dwords. This is really only useful if your
           firmware is split in multiple files; otherwise the offset starts at zero and
           automatically adjusts based on the xfer size given.

EXAMPLES

       •   Transfer a firmware size 128KiB at a time:

               # nvme fw-download /dev/nvme0 --fw=/path/to/nvme.fw --xfer=0x20000

NVME

       Part of the nvme-user suite