NAME

       perf-script - Read perf.data (created by perf record) and display trace output

SYNOPSIS

       perf script [<options>]
       perf script [<options>] record <script> [<record-options>] <command>
       perf script [<options>] report <script> [script-args]
       perf script [<options>] <script> <required-script-args> [<record-options>] <command>
       perf script [<options>] <top-script> [script-args]

DESCRIPTION

       This command reads the input file and displays the trace recorded.

       There are several variants of perf script:

           'perf script' to see a detailed trace of the workload that was
           recorded.

           You can also run a set of pre-canned scripts that aggregate and
           summarize the raw trace data in various ways (the list of scripts is
           available via 'perf script -l').  The following variants allow you to
           record and run those scripts:

           'perf script record <script> <command>' to record the events required
           for 'perf script report'.  <script> is the name displayed in the
           output of 'perf script --list' i.e. the actual script name minus any
           language extension.  If <command> is not specified, the events are
           recorded using the -a (system-wide) 'perf record' option.

           'perf script report <script> [args]' to run and display the results
           of <script>.  <script> is the name displayed in the output of 'perf
           trace --list' i.e. the actual script name minus any language
           extension.  The perf.data output from a previous run of 'perf script
           record <script>' is used and should be present for this command to
           succeed.  [args] refers to the (mainly optional) args expected by
           the script.

           'perf script <script> <required-script-args> <command>' to both
           record the events required for <script> and to run the <script>
           using 'live-mode' i.e. without writing anything to disk.  <script>
           is the name displayed in the output of 'perf script --list' i.e. the
           actual script name minus any language extension.  If <command> is
           not specified, the events are recorded using the -a (system-wide)
           'perf record' option.  If <script> has any required args, they
           should be specified before <command>.  This mode doesn't allow for
           optional script args to be specified; if optional script args are
           desired, they can be specified using separate 'perf script record'
           and 'perf script report' commands, with the stdout of the record step
           piped to the stdin of the report script, using the '-o -' and '-i -'
           options of the corresponding commands.

           'perf script <top-script>' to both record the events required for
           <top-script> and to run the <top-script> using 'live-mode'
           i.e. without writing anything to disk.  <top-script> is the name
           displayed in the output of 'perf script --list' i.e. the actual
           script name minus any language extension; a <top-script> is defined
           as any script name ending with the string 'top'.

           [<record-options>] can be passed to the record steps of 'perf script
           record' and 'live-mode' variants; this isn't possible however for
           <top-script> 'live-mode' or 'perf script report' variants.

           See the 'SEE ALSO' section for links to language-specific
           information on how to write and run your own trace scripts.

OPTIONS

       <command>...
           Any command you can specify in a shell.

       -D, --dump-raw-script=
           Display verbose dump of the trace data.

       -L, --Latency=
           Show latency attributes (irqs/preemption disabled, etc).

       -l, --list=
           Display a list of available trace scripts.

       -s [lang], --script=
           Process trace data with the given script ([lang]:script[.ext]). If the string lang is
           specified in place of a script name, a list of supported languages will be displayed
           instead.

       -g, --gen-script=
           Generate perf-script.[ext] starter script for given language, using current perf.data.

       -a
           Force system-wide collection. Scripts run without a <command> normally use -a by
           default, while scripts run with a <command> normally don’t - this option allows the
           latter to be run in system-wide mode.

       -i, --input=
           Input file name. (default: perf.data unless stdin is a fifo)

       -d, --debug-mode
           Do various checks like samples ordering and lost events.

       -F, --fields
           Comma separated list of fields to print. Options are: comm, tid, pid, time, cpu,
           event, trace, ip, sym, dso, addr, symoff, srcline, period, iregs, brstack, brstacksym,
           flags. Field list can be prepended with the type, trace, sw or hw, to indicate to
           which event type the field list applies. e.g., -f sw:comm,tid,time,ip,sym and -f
           trace:time,cpu,trace

               perf script -f <fields>

               is equivalent to:

               perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>

               i.e., the specified fields apply to all event types if the type string
               is not given.

               The arguments are processed in the order received. A later usage can
               reset a prior request. e.g.:

               -f trace: -f comm,tid,time,ip,sym

               The first -f suppresses trace events (field list is ""), but then the
               second invocation sets the fields to comm,tid,time,ip,sym. In this case a
               warning is given to the user:

               "Overriding previous field request for all events."

               Alternatively, consider the order:

               -f comm,tid,time,ip,sym -f trace:

               The first -f sets the fields for all events and the second -f
               suppresses trace events. The user is given a warning message about
               the override, and the result of the above is that only S/W and H/W
               events are displayed with the given fields.

               For the 'wildcard' option if a user selected field is invalid for an
               event type, a message is displayed to the user that the option is
               ignored for that type. For example:

               $ perf script -f comm,tid,trace
               'trace' not valid for hardware events. Ignoring.
               'trace' not valid for software events. Ignoring.

               Alternatively, if the type is given an invalid field is specified it
               is an error. For example:

               perf script -v -f sw:comm,tid,trace
               'trace' not valid for software events.

               At this point usage is displayed, and perf-script exits.

               The flags field is synthesized and may have a value when Instruction
               Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
               call, return, conditional, system, asynchronous, interrupt,
               transaction abort, trace begin, trace end, and in transaction,
               respectively.

               Finally, a user may not set fields to none for all event types.
               i.e., -f "" is not allowed.

               The brstack output includes branch related information with raw addresses using the
               /v/v/v/v/ syntax in the following order:
               FROM: branch source instruction
               TO  : branch target instruction
               M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
               X/- : X=branch inside a transactional region, -=not in transaction region or not supported
               A/- : A=TSX abort entry, -=not aborted region or not supported

               The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.

       -k, --vmlinux=<file>
           vmlinux pathname

       --kallsyms=<file>
           kallsyms pathname

       --symfs=<directory>
           Look for files with symbols relative to this directory.

       -G, --hide-call-graph
           When printing symbols do not display call chain.

       -C, --cpu
           Only report samples for the list of CPUs provided. Multiple CPUs can be provided as a
           comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
           Default is to report samples on all CPUs.

       -c, --comms=
           Only display events for these comms. CSV that understands file://filename entries.

       --pid=
           Only show events for given process ID (comma separated list).

       --tid=
           Only show events for given thread ID (comma separated list).

       -I, --show-info
           Display extended information about the perf.data file. This adds information which may
           be very large and thus may clutter the display. It currently includes: cpu and numa
           topology of the host system. It can only be used with the perf script report mode.

       --show-kernel-path
           Try to resolve the path of [kernel.kallsyms]

       --show-task-events Display task related events (e.g. FORK, COMM, EXIT).

       --show-mmap-events Display mmap related events (e.g. MMAP, MMAP2).

       --show-switch-events Display context switch events i.e. events of type PERF_RECORD_SWITCH
       or PERF_RECORD_SWITCH_CPU_WIDE.

       --demangle
           Demangle symbol names to human readable form. It’s enabled by default, disable with
           --no-demangle.

       --demangle-kernel
           Demangle kernel symbol names to human readable form (for C++ kernels).

       --header Show perf.data header.

       --header-only Show only perf.data header.

       --itrace
           Options for decoding instruction tracing data. The options are:

               i       synthesize instructions events
               b       synthesize branches events
               c       synthesize branches events (calls only)
               r       synthesize branches events (returns only)
               x       synthesize transactions events
               e       synthesize error events
               d       create a debug log
               g       synthesize a call chain (use with i or x)
               l       synthesize last branch entries (use with i or x)

               The default is all events i.e. the same as --itrace=ibxe

               In addition, the period (default 100000) for instructions events
               can be specified in units of:

               i       instructions
               t       ticks
               ms      milliseconds
               us      microseconds
               ns      nanoseconds (default)

               Also the call chain size (default 16, max. 1024) for instructions or
               transactions events can be specified.

               Also the number of last branch entries (default 64, max. 1024) for
               instructions or transactions events can be specified.

               To disable decoding entirely, use --no-itrace.

       --full-source-path
           Show the full path for source files for srcline output.

       --ns
           Use 9 decimal places when displaying time (i.e. show the nanoseconds)

SEE ALSO

       perf-record(1), perf-script-perl(1), perf-script-python(1)