Provided by: gmt-common_5.2.1+dfsg-3build1_all 
NAME
pspolar - Plot polarities on the inferior focal half-sphere on maps
SYNOPSIS
pspolar [ table ] lon/lat parameters region size <symbol><size> [ [p|s]parameters ] [
lon/lat[/dash_width/pointsize] ] [ color ] [ color ] [ color ] [ ] [ ] [ ] [ ] [ mode[args] ] [
angle/form/justify/fontsize ] [ [just/dx/dy/][c|label] ] [ [level] ] [ pen ] [ x_offset ] [ y_offset ] [
-ccopies ] [ -di<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -:[i|o] ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION
pspolar reads data values from files [or standard input] and generates PostScript code that will plot
stations on focal mechanisms on a map. The PostScript code is written to standard output.
Parameters are expected to be in the following columns:
1,2,3: station_code, azimuth, take-off angle
4: polarity:
• compression can be c,C,u,U,+
• rarefaction can be d,D,r,R,-
• not defined is anything else
REQUIRED ARGUMENTS
table One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data
columns. If no tables are given then we read from standard input.
-Jparameters (more ...)
Select map projection.
-R[unit]west/east/south/north[/zmin/zmax][r]
west, east, south, and north specify the region of interest, and you may specify them in decimal
degrees or in [+-]dd:mm[:ss.xxx][W|E|S|N] format. Append r if lower left and upper right map
coordinates are given instead of w/e/s/n. The two shorthands -Rg and -Rd stand for global domain
(0/360 and -180/+180 in longitude respectively, with -90/+90 in latitude). Alternatively for grid
creation, give Rcodelon/lat/nx/ny, where code is a 2-character combination of L, C, R (for left,
center, or right) and T, M, B for top, middle, or bottom. e.g., BL for lower left. This indicates
which point on a rectangular region the lon/lat coordinate refers to, and the grid dimensions nx
and ny with grid spacings via -I is used to create the corresponding region. Alternatively,
specify the name of an existing grid file and the -R settings (and grid spacing, if applicable)
are copied from the grid. Using -Runit expects projected (Cartesian) coordinates compatible with
chosen -J and we inversely project to determine actual rectangular geographic region. For
perspective view (-p), optionally append /zmin/zmax. In case of perspective view (-p), a z-range
(zmin, zmax) can be appended to indicate the third dimension. This needs to be done only when
using the -Jz option, not when using only the -p option. In the latter case a perspective view of
the plane is plotted, with no third dimension.
-Dlongitude/latitude
Maps the bubble at given longitude and latitude point.
-Msize Sets the size of the beach ball to plot polarities in. Size is in default units (unless c, i, or p
is appended).
-S<symbol_type><size>
Selects symbol_type and symbol size. Size is in default inits (unless c, i, or p is appended).
Choose symbol type from st(a)r, (c)ircle, (d)iamond, (h)exagon, (i)nverted triangle, (p)oint,
(s)quare, (t)riangle, (x)cross.
OPTIONAL ARGUMENTS
-B[p|s]parameters (more ...)
Set map boundary intervals.
-C Offsets focal mechanisms to the latitude and longitude specified in the last two columns of the
input file.
-Ecolor
Selects filling of symbols for stations in extensive quadrants. Set the color [Default is 250]. If
-Ecolor is the same as -Fcolor, use -e to outline.
-Fcolor
Sets background color of the beach ball. Default is no fill.
-Gcolor
Selects filling of symbols for stations in compressional quadrants. Set the color [Default is
black].
-K (more ...)
Do not finalize the PostScript plot.
-N Does not skip symbols that fall outside map border [Default plots points inside border only].
-O (more ...)
Append to existing PostScript plot.
-P (more ...)
Select "Portrait" plot orientation.
-Qmode[args]
Sets one or more attributes; repeatable. The various combinations are
-Qe[pen]
Outline symbols in extensive quadrants using pen or the default pen (see ).
-Qf[pen]
Outline the beach ball using pen or the default pen (see ).
-Qg[pen]
Outline symbols in compressional quadrants using pen or the default pen (see ).
-Qh Use special format derived from HYPO71 output
-Qshalf-size/[V[v_width/h_length/h_width/shape]][Gcolor][L]
Plots S polarity azimuth. S polarity is in last column. It may be a vector (V flag) or a
segment. Give half-size,v_width,h_length,h_width in default units (unless c, i, or p is
appended). [L] flag is for outline. See Vector Attributes for specifying additional
attributes.
-Qtpen Set pen color to write station code. Default uses the default pen (see ).
-Tangle/form/justify/fontsize in points
To write station code. [Default is 0.0/0/5/12].
-U[just/dx/dy/][c|label] (more ...)
Draw GMT time stamp logo on plot.
-V[level] (more ...)
Select verbosity level [c].
-W[-|+][pen][attr] (more ...)
Set current pen attributes [Defaults: width = default, color = black, style = solid].
-X[a|c|f|r][x-shift[u]]
-Y[a|c|f|r][y-shift[u]] (more ...)
Shift plot origin.
-ccopies (more ...)
Specify number of plot copies [Default is 1].
-dinodata (more ...)
Replace input columns that equal nodata with NaN.
-icols[l][sscale][ooffset][,...] (more ...)
Select input columns (0 is first column).
-:[i|o] (more ...)
Swap 1st and 2nd column on input and/or output.
-^ or just -
Print a short message about the syntax of the command, then exits (NOTE: on Windows use just -).
-+ or just +
Print an extensive usage (help) message, including the explanation of any module-specific option
(but not the GMT common options), then exits.
-? or no arguments
Print a complete usage (help) message, including the explanation of options, then exits.
--version
Print GMT version and exit.
--show-datadir
Print full path to GMT share directory and exit.
VECTOR ATTRIBUTES
Several modifiers may be appended to the vector-producing options to specify the placement of vector
heads, their shapes, and the justification of the vector. Below, left and right refers to the side of the
vector line when viewed from the start point to the end point of the segment:
+aangle sets the angle of the vector head apex [30].
+b places a vector head at the beginning of the vector path [none]. Optionally, append t for a
terminal line, c for a circle, or a for arrow [Default]. Further append l|r to only draw the left or
right side of this head [both sides].
+e places a vector head at the end of the vector path [none]. Optionally, append t for a terminal
line, c for a circle, or a for arrow [Default]. Further append l|r to only draw the left or right
side of this head [both sides].
+g-|fill turns off vector head fill (if -) or sets the vector head fill [Default fill is used, which
may be no fill].
+l draws half-arrows, using only the left side of specified heads [both sides].
+m places a vector head at the mid-point the vector path [none]. Append f or r for forward or reverse
direction of the vector [forward]. Optionally, append t for a terminal line, c for a circle, or a for
arrow head [Default]. Further append l|r to only draw the left or right side of this head [both
sides]. Cannot be combined with +b or +e.
+nnorm scales down vector attributes (pen thickness, head size) with decreasing length, where vectors
shorter than norm will have their attributes scaled by length/norm [arrow attributes remains invariant
to length].
+oplon/plat specifies the oblique pole for the great or small circles. Only needed for great circles
if +q is given.
+p[-][pen] sets the vector pen attributes. If pen has a leading - then the head outline is not drawn.
[Default pen is used, and head outline is drawn]
+q means the input angle, length data instead represent the start and stop opening angles of the arc
segment relative to the given point.
+r draws half-arrows, using only the right side of specified heads [both sides].
t[b|e]trim will shift the beginning or end point (or both) along the vector segment by the given trim;
append suitable unit. If the modifiers b|e are not used then trim may be two values separated by a
slash, which is used to specify different trims for the two ends. Positive trims will shorted the
vector while negative trims will lengthen it [no trim].
In addition, all but circular vectors may take these modifiers:
+jjust determines how the input x,y point relates to the vector. Choose from beginning [default], end,
or center.
+s means the input angle, length is instead the x, y coordinates of the vector end point.
Finally, Cartesian vectors may take these modifiers:
+zscale[unit] expects input dx,dy vector components and uses the scale to convert to polar coordinates
with length in given unit.
EXAMPLES
gmt pspolar -R239/240/34/35.2 -JM8c -N -Sc0.4 -h1 -D39.5/34.5 -M5 << END > test.ps
#stat azim ih pol
0481 11 147 c
6185 247 120 d
0485 288 114 +
0490 223 112 -
0487 212 109 .
END
or
gmt pspolar -R239/240/34/35.2 -JM8c -N -Sc0.4 -h1 -D239.5/34.5 -M5 <<END > test.ps
#Date Or. time stat azim ih
910223 1 22 0481 11 147 ipu0
910223 1 22 6185 247 120 ipd0
910223 1 22 0485 288 114 epu0
910223 1 22 0490 223 112 epd0
910223 1 22 0487 212 109 epu0
END
SEE ALSO
psmeca, psvelo, pscoupe, gmt, psbasemap, psxy
REFERENCES
Bomford, G., Geodesy, 4th ed., Oxford University Press, 1980.
Aki, K. and P. Richards, Quantitative Seismology, Freeman, 1980.
AUTHORS
Genevieve Patau, Laboratory of Seismogenesis <http://www.ipgp.fr/rech/sismogenese/>, Institut de Physique du Globe de Paris, Departement de Sismologie, Paris, France
COPYRIGHT
2015, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe