Provided by: libqmi-utils_1.16.2-1ubuntu0.16.04.1_amd64 
NAME
qmi-network - Simple network management of QMI devices
SYNOPSIS
qmi-network [OPTIONS] [DEVICE] [COMMAND]
DESCRIPTION
Simple network management of QMI devices
Commands:
start Start network connection
stop Stop network connection
status Query network connection status
OPTIONS
--profile=[PATH]
Use the profile in the specified path
--help Show help options
--version
Show version
Notes:
1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:
/dev/cdc-wdm0
2) The qmi-network script requires a profile to work. Unless explicitly specified with
`--profile', the file is assumed to be available in the following path:
/etc/qmi-network.conf
3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is
called 'internet'):
APN=internet
4) Optional APN user/password strings may be given in the following way:
APN_USER=user APN_PASS=password
5) If you want to instruct the qmi-network script to use the qmi-proxy setup, you can do so by
configuring the following line in the profile:
PROXY=yes
6) Once the qmi-network script reports a successful connection you still need to run a DHCP client
on the associated WWAN network interface.
COPYRIGHT
Copyright (2013-2015) Aleksander Morgado License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent
permitted by law.
SEE ALSO
The full documentation for qmi-network is maintained as a Texinfo manual. If the info and qmi-network
programs are properly installed at your site, the command
info qmi-network
should give you access to the complete manual.