Provided by: radiance_4R1+20120125-1.1_amd64 
NAME
rcalc - record calculator
SYNOPSIS
rcalc [ -b ][ -l ][ -p ][ -n ][ -w ][ -u ][ -tS ][ -i format ][ -o format ][ -f source ][ -e expr ][ -s
svar=sval ] file ..
DESCRIPTION
Rcalc transforms ``records'' from each file according to the given set of literal and relational
information. By default, records are separated by newlines, and contain numeric fields separated by
tabs. The -tS option is used to specify an alternate tab character.
A -i format option specifies a template for an alternate input record format. Format is interpreted as a
specification string if it contains a dollar sign '$'. Otherwise, it is interpreted as the name of the
file containing the format specification. In either case, if the format does not end with a newline, one
will be added automatically. A special form of the -i option may be followed immediately by a 'd' or an
'f' and an optional count, which defaults to 1, indicating the number of double or float binary values to
read per record on the input file. If the input is byte-swapped, the -iD or -iF options may be
substituted. If binary input is specified, no format string or file is needed.
A -o format option specifies an alternate output record format. It is interpreted the same as an input
specification, except that the special -od or -of options do not require a count, as this will be
determined by the number of output channels in the given expressions. If byte-swapped output is desired,
the -oD or -oF options may be substituted.
The -p option specifies "passive mode," where characters that do not match the input format are passed
unaltered to the output. This option has no effect unless -i is also specified, and does not make much
sense unless -o is also given. With both input and output formats, the passive mode can effectively
substitute information in the middle of a file or stream without affecting the rest of the data.
The variable and function definitions in each -f source file are read and compiled. The -e expr option
can be used to define variables on the command line. Since many of the characters in an expression have
special meaning to the shell, it should usually be enclosed in single quotes. The -s svar=sval option
can be used to assign a string variable a string value. If this string variable appears in an input
format, only records with the specified value will be processed.
The -b option instructs the program to accept only exact matches. By default, tabs and spaces are
ignored except as field separators. The -l option instructs the program to ignore newlines in the input,
basically treating them the same as tabs and spaces. Normally, the beginning of the input format matches
the beginning of a line, and the end of the format matches the end of a line. With the -l option, the
input format can match anywhere on a line.
The -w option causes non-fatal error messages (such as division by zero) to be supressed. The -u option
causes output to be flushed after each record. The -n option tells the program not to get any input, but
to produce a single output record. Otherwise, if no files are given, the standard input is read.
Format files associate names with string and numeric fields separated by literal information in a record.
A numeric field is given in a format file as a dollar sign, followed by curly braces enclosing a variable
name:
This is a numeric field: ${vname}
A string variable is enclosed in parentheses:
This is a string field: $(sname)
The program attempts to match literal information in the input format to its input and assign string and
numeric fields accordingly. If a string or numeric field variable appears more than once in the input
format, input values for the corresponding fields must match (ie. have the same value) for the whole
record to match. Numeric values are allowed some deviation, on the order of 0.1%, but string variables
must match exactly. Thus, dummy variables for "don't care" fields should be given unique names so that
they are not all required to take on the same value.
For each valid input record, an output record is produced in its corresponding format. Output field
widths are given implicitly by the space occupied in the format file, including the dollar sign and
braces. This makes it impossible to produce fields with fewer than four characters. If the -b option is
specified, input records must exactly match the template. By default, the character following each input
field is used as a delimiter. This implies that string fields that are followed by white space cannot
contain strings with white space. Also, numeric fields followed but not preceded by white space will not
accept numbers preceded by white space. Adjacent input fields are advisable only with the -b option.
Numeric output fields may contain expressions as well as variables. A dollar sign may appear in a
literal as two dollar signs ($$).
The definitions specified in -e and -f options relate numeric output fields to numeric input fields. For
the default record format, a field is a variable of the form $N, where N is the column number, beginning
with 1. Output columns appear on the left-hand side of assignments, input columns appear on the right-
hand side.
A variable definition has the form:
var = expression ;
Any instance of the variable in an expression will be replaced with its definition.
An expression contains real numbers, variable names, function calls, and the following operators:
+ - * / ^
Operators are evaluated left to right. Powers have the highest precedence; multiplication and division
are evaluated before addition and subtraction. Expressions can be grouped with parentheses. All values
are double precision real.
A function definition has the form:
func(a1, a2, ..) = expression ;
The expression can contain instances of the function arguments as well as other variables and functions.
Function names can be passed as arguments. Recursive functions can be defined using calls to the defined
function or other functions calling the defined function.
The variable cond, if defined, will determine whether the current input record produces an output record.
If cond is positive, output is produced. If cond is less than or equal to zero, the record is skipped
and no other expressions are evaluated. This provides a convenient method for avoiding inappropriate
calculations. The following library of pre-defined functions and variables is provided:
in(n) Return the value for input column n, or the number of columns available in this record if n is
0. This is an alternate way to get a column value instead of using the $N notation, and is
more flexible since it is programmable. This function is disabled if an input format is used.
if(cond, then, else)
if cond is greater than zero, then is evaluated, otherwise else is evaluated. This function is
necessary for recursive definitions.
select(N, a1, a2, ..)
return aN (N is rounded to the nearest integer). This function provides array capabilities.
If N is zero, the number of available arguments is returned.
rand(x) compute a random number between 0 and 1 based on x.
floor(x) return largest integer not greater than x.
ceil(x) return smallest integer not less than x.
sqrt(x) return square root of x.
exp(x) compute e to the power of x (e approx = 2.718281828).
log(x) compute the logarithm of x to the base e.
log10(x) compute the logarithm of x to the base 10.
PI the ratio of a circle's circumference to its diameter.
recno the number of records recognized thus far.
outno the number or records output thus far (including this one).
sin(x), cos(x), tan(x)
trigonometric functions.
asin(x), acos(x), atan(x)
inverse trigonometric functions.
atan2(y, x)
inverse tangent of y/x (range -pi to pi).
EXAMPLE
To print the square root of column two in column one, and column one times column three in column two:
rcalc -e '$1=sqrt($2);$2=$1*$3' inputfile > outputfile
AUTHOR
Greg Ward
BUGS
String variables can only be used in input and output formats and -s options, not in definitions.
Tabs count as single spaces inside fields.
SEE ALSO
cnt(1), ev(1), getinfo(1), icalc(1), rlam(1), tabfunc(1), total(1)