Provided by: rrdtool_1.5.5-4_amd64 bug

NAME

       rrdcgi - Create web pages containing RRD graphs based on templates

SYNOPSIS

       "#!/path/to/"rrdcgi [--filter|-f]

DESCRIPTION

       rrdcgi is a sort of very limited script interpreter. Its purpose is to run as a cgi-
       program and parse a web page template containing special <RRD:: tags. rrdcgi will
       interpret and act according to these tags.  In the end it will printout a web page
       including the necessary CGI headers.

       rrdcgi parses the contents of the template in 3 steps. In each step it looks only for a
       subset of tags. This allows nesting of tags.

       The argument parser uses the same semantics as you are used from your C-shell.

       --filter|-f
               Assume that rrdcgi is run as a filter and not as a cgi.

   Keywords
       RRD::CV name
               Inserts the CGI variable of the given name.

       RRD::CV::QUOTE name
               Inserts the CGI variable of the given name but quotes it, ready for use as an
               argument in another RRD:: tag. So even when there are spaces in the value of the
               CGI variable it will still be considered to be one argument.

       RRD::CV::PATH name
               Inserts the CGI variable of the given name, quotes it and makes sure it starts
               neither with a '/' nor contains '..'. This is to make sure that no problematic
               pathnames can be introduced through the CGI interface.

       RRD::GETENV variable
               Get the value of an environment variable.

                <RRD::GETENV REMOTE_USER>

               might give you the name of the remote user given you are using some sort of access
               control on the directory.

       RRD::GOODFOR seconds
               Specify the number of seconds this page should remain valid. This will prompt the
               rrdcgi to output a Last-Modified, an Expire and if the number of seconds is
               negative a Refresh header.

       RRD::INCLUDE filename
               Include the contents of the specified file into the page returned from the cgi.

       RRD::SETENV variable value
               If you want to present your graphs in another time zone than your own, you could
               use

                <RRD::SETENV TZ UTC>

               to make sure everything is presented in Universal Time. Note that the values
               permitted to TZ depend on your OS.

       RRD::SETVAR variable value
               Analog to SETENV but for local variables.

       RRD::GETVAR variable
               Analog to GETENV but for local variables.

       RRD::TIME::LAST rrd-file strftime-format
               This gets replaced by the last modification time of the selected RRD. The time is
               strftime-formatted with the string specified in the second argument.

       RRD::TIME::NOW strftime-format
               This gets replaced by the current time of day. The time is strftime-formatted with
               the string specified in the argument.

               Note that if you return : (colons) from your strftime format you may have to
               escape them using \ if the time is to be used as an argument to a GRAPH command.

       RRD::TIME::STRFTIME START|END start-spec end-spec strftime-format
               This gets replaced by a strftime-formatted time using the format strftime-format
               on either start-spec or end-spec depending on whether START or END is specified.
               Both start-spec and end-spec must be supplied as either could be relative to the
               other.  This is intended to allow pretty titles on graphs with times that are
               easier for non RRDtool folks to figure out than "-2weeks".

               Note that again, if you return : (colon) from your strftime format, you may have
               to escape them using \ if the time is to be used as an argument to a GRAPH
               command.

       RRD::GRAPH rrdgraph arguments
               This tag creates the RRD graph defined by its argument and then is replaced by an
               appropriate <IMG ... > tag referring to the graph.  The --lazy option in RRD graph
               can be used to make sure that graphs are only regenerated when they are out of
               date. The arguments to the RRD::GRAPH tag work as described in the rrdgraph manual
               page.

               Use the --lazy option in your RRD::GRAPH tags, to reduce the load on your server.
               This option makes sure that graphs are only regenerated when the old ones are out
               of date.

               If you do not specify your own --imginfo format, the following will be used:

                <IMG SRC="%s" WIDTH="%lu" HEIGHT="%lu">

               Note that %s stands for the filename part of the graph generated, all directories
               given in the PNG file argument will get dropped.

       RRD::PRINT number
               If the preceding  RRD::GRAPH tag contained and PRINT arguments, then you can
               access their output with this tag. The number argument refers to the number of the
               PRINT argument. This first PRINT has number 0.

       RRD::INTERNAL <var>
               This tag gets replaced by an internal var. Currently these vars are known:
               VERSION, COMPILETIME.  These vars represent the compiled-in values.

EXAMPLE 1

       The example below creates a web page with a single RRD graph.

        #!/usr/local/bin/rrdcgi
        <HTML>
        <HEAD><TITLE>RRDCGI Demo</TITLE></HEAD>
        <BODY>
        <H1>RRDCGI Example Page</H1>
        <P>
        <RRD::GRAPH demo.png --lazy --title="Temperatures"
                 DEF:cel=demo.rrd:exhaust:AVERAGE
                 LINE2:cel#00a000:"D. Celsius">

        </P>
        </BODY>
        </HTML>

EXAMPLE 2

       This script is slightly more elaborate, it allows you to run it from a form which sets
       RRD_NAME. RRD_NAME is then used to select which RRD you want to use as source for your
       graph.

        #!/usr/local/bin/rrdcgi
        <HTML>
        <HEAD><TITLE>RRDCGI Demo</TITLE></HEAD>
        <BODY>
        <H1>RRDCGI Example Page for <RRD::CV RRD_NAME></H1>
        <H2>Selection</H2>
        <FORM><INPUT NAME=RRD_NAME TYPE=RADIO VALUE=roomA> Room A,
              <INPUT NAME=RRD_NAME TYPE=RADIO VALUE=roomB> Room B.
              <INPUT TYPE=SUBMIT></FORM>
        <H2>Graph</H2>
        <P>
        <RRD::GRAPH <RRD::CV::PATH RRD_NAME>.png --lazy
                 --title "Temperatures for "<RRD::CV::QUOTE RRD_NAME>
                 DEF:cel=<RRD::CV::PATH RRD_NAME>.rrd:exhaust:AVERAGE
                 LINE2:cel#00a000:"D. Celsius">

        </P>
        </BODY>
        </HTML>

EXAMPLE 3

       This example shows how to handle the case where the RRD, graphs and cgi-bins are separate
       directories

        #!/.../bin/rrdcgi
        <HTML>
        <HEAD><TITLE>RRDCGI Demo</TITLE></HEAD>
        <BODY>
        <H1>RRDCGI test Page</H1>
        <RRD::GRAPH
         /.../web/pngs/testhvt.png
         --imginfo '<IMG SRC=/.../pngs/%s WIDTH=%lu HEIGHT=%lu >'
         --lazy --start -1d --end now
         DEF:http_src=/.../rrds/test.rrd:http_src:AVERAGE
         AREA:http_src#00ff00:http_src
        >
        </BODY>
        </HTML>

       Note 1: Replace /.../ with the relevant directories

       Note 2: The SRC=/.../pngs should be paths from the view of the webserver/browser

AUTHOR

       Tobias Oetiker <tobi@oetiker.ch>