xenial (1) turnutils_stunclient.1.gz

Provided by: coturn_4.5.0.3-1ubuntu0.4_amd64 bug

GENERAL INFORMATION

       A  set of turnutils_* programs provides some utility functionality to be used for testing and for setting
       up the TURN server.

       1.     turnutils_uclient: emulates multiple UDP,TCP,TLS or DTLS clients.  (this program is  provided  for
              the  testing  purposes  only  !)   The  compiled  binary  image of this program is located in bin/
              sub-directory.

       2.     turnutils_peer: a simple stateless UDP-only "echo" server, to be used as the final server in relay
              pattern  ("peer").  For  every  incoming  UDP  packet, it simply echoes it back.  (this program is
              provided for the testing purposes only  !)   When  the  test  clients  are  communicating  in  the
              client-to-client  manner  (when the "turnutils_uclient" program is used with "-y" option) then the
              turnutils_peer is not needed.

       The compiled binary image of this program is located in bin/ subdirectory.

       3.     turnutils_stunclient: a simple STUN client example.  The compiled binary image of this program  is
              located in bin/ subdirectory.

       4.     turnutils_rfc5769check:   a  utility  that  checks  the  correctness  of  the  STUN/TURN  protocol
              implementation. This utility is used only for the compilation check procedure, it is not copied to
              the installation destination.

              In  the "examples/scripts" subdirectory, you will find the examples of command lines to be used to
              run the programs. The scripts are meant to be run from examples/ subdirectory, for example:

              $ cd examples

              $ ./scripts/secure_relay.sh

              =====================================

   NAME
        turnutils_uclient - this client emulation application is supplied for the test purposes only.

   SYNOPSIS
       $ turnutils_uclient [-tTSvsyhcxg] [options] <TURN-Server-IP-address>

   DESCRIPTION
       It was designed to simulate multiple clients. It uses asynch  IO  API  in  libevent  to  handle  multiple
       clients.  A  client connects to the relay, negotiates the session, and sends multiple (configured number)
       messages to the server (relay), expecting the same number of replies.  The  length  of  the  messages  is
       configurable.   The  message  is  an  arbitrary  octet  stream.   The  number  of the messages to send is
       configurable.

       Flags:

       -t     Use TCP for communications between client and TURN server (default is UDP).

       -b     Use SCTP for communications between client and TURN server (default is UDP).

       -T     Use TCP for the relay transport (default - UDP). Implies options -t, -y, -c, and ignores flags and
              options -s, -e, -r and -g. Can be used together with -b.

       -P     Passive TCP (RFC6062 with active peer). Implies -T.

       -S     Secure SSL connection: SSL/TLS for TCP, DTLS for UDP, TLS/SCTP for SCTP.

       -U     Secure unencrypted connection (suite eNULL): SSL/TLS for TCP, DTLS for UDP.

       -v     Verbose.

       -s     Use "Send" method in TURN; by default, it uses TURN Channels.

       -y     Use  client-to-client connections: RTP/RTCP pair of channels to another RTP/RTCP pair of channels.
              with this option the turnutils_peer application is not used, as the allocated relay endpoints  are
              talking to each other.

       -h     Hang on indefinitely after the last sent packet.

       -c     Do not create rtcp connections.

       -x     Request IPv6 relay address (RFC6156).

       -X     IPv4 relay address explicitly requested.

       -g     Set DONT_FRAGMENT parameter in TURN requests.

       -D     Do mandatory channel padding even for UDP (like pjnath).

       -N     do negative tests (some limited cases only).

       -R     do negative protocol tests.

       -O     DOS attack mode.

       -M     Use TURN ICE Mobility.

       -I     Do  not  set  permissions  on  TURN  relay  endpoints  (for  testing the non-standard server relay
              functionality).

       -G     Generate extra requests (create permissions, channel bind).

       -B     Random disconnect after a few initial packets.

       -Z     Dual allocation (SSODA). Implies -c option.

       -J     Use oAuth with default test key kid='north'.

       Options with required values:

       -l     Message length (Default: 100 Bytes).

       -i     Certificate file (for secure connections only, optional).

       -k     Private key file (for secure connections only).

       -E     CA file for server certificate verification, if the server certificate to be verified.

       -p     TURN Server port (Defaults: 3478 unsecure, 5349 secure).

       -n     Number of messages to send (Default: 5).

       -d     Local interface device (optional, Linux only).

       -L     Local IP address (optional).

       -m     Number of clients (Default: 1, 2 or 4, depending on options).

       -e     Peer address.

       -r     Peer port (Default: 3480).

       -z     Per-session packet interval in milliseconds (Default: 20).

       -u     STUN/TURN user name.

       -w     STUN/TURN user password.

       -W     TURN REST API authentication secret. Is not compatible with -A flag.

       -C     This is the timestamp/username separator symbol (character) in TURN REST API. The default value is
              :.

       -F     Cipher suite for TLS/DTLS. Default value is DEFAULT.

       -o     the ORIGIN STUN attribute value.

       -a     Bandwidth for the bandwidth request in ALLOCATE. The default value is zero.

       See the examples in the "examples/scripts" directory.

       ======================================

   NAME
        turnutils_peer - a simple UDP-only echo backend server.

   SYNOPSYS
       $ turnutils_peer [-v] [options]

   DESCRIPTION
       This application is used for the test purposes only, as a peer for the turnutils_uclient application.

       Options with required values:

       -p     Listening UDP port (Default: 3480).

       -d     Listening interface device (optional)

       -L     Listening  address  of  turnutils_peer  server. Multiple listening addresses can be used, IPv4 and
              IPv6.  If no listener address(es) defined, then it listens on all IPv4 and IPv6 addresses.

       -v     Verbose

       ========================================

   NAME
        turnutils_stunclient - a basic STUN client.

   SYNOPSIS
       $ turnutils_stunclient [options] <STUN-Server-IP-address>

   DESCRIPTION
       It sends a "new" STUN RFC 5389 request (over UDP) and shows the reply information.

       Options with required values:

       -p     STUN server port (Default: 3478).

       -L     Local address to use (optional).

       -f     Force RFC 5780 processing.

       The turnutils_stunclient program checks the results of the first request, and if it finds that  the  STUN
       server supports RFC 5780 (the binding response reveals that) then the turnutils_stunclient makes a couple
       more requests with different parameters, to demonstrate the NAT discovery capabilities.

       This utility does not support the "old" "classic" STUN protocol (RFC 3489).

       =====================================

   NAME
        turnutils_rfc5769check - a utility that tests the correctness of STUN protocol implementation.

   SYNOPSIS
       $ turnutils_rfc5769check

   DESCRIPTION
       turnutils_rfc5769check tests the correctness of STUN protocol implementation  against  the  test  vectors
       predefined  in  RFC 5769 and prints the results of the tests on the screen. This utility is used only for
       the compilation check procedure, it is not copied to the installation destination.

       Usage:

       $ turnutils_rfc5769check

       ===================================

DOCS

       After installation, run the command:

       $ man turnutils

       or in the project root directory:

       $ man -M man turnutils

       to see the man page.

       =====================================

FILES

       /etc/turnserver.conf

       /var/db/turndb

       /usr/local/var/db/turndb

       /var/lib/turn/turndb

       /usr/local/etc/turnserver.conf

       =================================

DIRECTORIES

       /usr/local/share/turnserver

       /usr/local/share/doc/turnserver

       /usr/local/share/examples/turnserver

       ===================================

STANDARDS

       new STUN RFC 5389

       TURN RFC 5766

       TURN-TCP extension RFC 6062

       TURN IPv6 extension RFC 6156

       STUN/TURN test vectors RFC 5769

       STUN NAT behavior discovery RFC 5780

       ====================================

SEE ALSO

       turnserver, turnadmin

       ======================================

   WEB RESOURCES
       project page:

       https://github.com/coturn/coturn/

       Wiki page:

       https://github.com/coturn/coturn/wiki

       forum:

       https://groups.google.com/forum/?fromgroups=#!forum/turn-server-project-rfc5766-turn-server/

       ======================================

   AUTHORS
       Oleg Moskalenko <mom040267@gmail.com>

       Gabor Kovesdan http://kovesdan.org/

       Daniel Pocock http://danielpocock.com/

       John Selbie (jselbie@gmail.com)

       Lee Sylvester <lee@designrealm.co.uk>

       Erik Johnston <erikj@openmarket.com>

       Roman Lisagor <roman@demonware.net>

       Vladimir Tsanev <tsachev@gmail.com>

       Po-sheng Lin <personlin118@gmail.com>

       Peter Dunkley <peter.dunkley@acision.com>

       Mutsutoshi Yoshimoto <mutsutoshi.yoshimoto@mixi.co.jp>

       Federico Pinna <fpinna@vivocha.com>

       Bradley T. Hughes <bradleythughes@fastmail.fm>

                                                15 November 2015                                         TURN(1)