xenial (1) ufraw.1.gz

Provided by: ufraw-batch_0.20-3build1_amd64 bug

NAME

       UFRaw - Convert camera RAW images to standard image files.

SYNOPSIS

       ufraw [OPTIONS] <rawfile(s)>
       ufraw-batch [OPTIONS] <rawfile(s)>

DESCRIPTION

       The Unidentified Flying Raw (UFRaw) is a utility to read and manipulate raw images from digital cameras.
       It reads raw images using Dave Coffin's raw conversion utility - DCRaw. UFRaw supports basic color
       management using Little CMS, allowing the user to apply color profiles. For Nikon users UFRaw has the
       advantage that it can read the camera's tone curves.  Even if you don't own a Nikon, you can still apply
       a Nikon curve to your images.

       By default 'ufraw' displays a preview window for each raw image allowing the user to tweak the image
       parameters before saving. If no raw images are given at the command line, UFRaw will display a file
       chooser dialog.  To process the images with no questions asked (and no preview) use the command
       'ufraw-batch'.

       The input files can be either raw images or UFRaw ID-files.  ID-files contain a raw image filename and
       the parameters for handling the image.

       UFRaw can also work as a GIMP plug-in. To activate it simply open a raw image or a UFRaw ID-file in the
       GIMP.

OPTIONS

       The options supplied on the command-line decide the starting-values for the GUI. The GUI will then allow
       you to tweak these values before saving the final image.

   General Options
       --version
           Display the version of UFRaw and exit.

       --help
           Display a brief description of how to use UFRaw and exit.

       --silent
           Do not display any messages during conversion. This option is only valid with 'ufraw-batch'.

       --conf=<ID-filename>
           Load all parameters from an ID-file. This feature can be used to tweak the parameters for one file
           using the GUI and using those parameters as the starting point for other images as well.

   Image Manipulation Options
       These command-line options override settings from the default configuration of UFRaw and from any loaded
       ID-file. The best way to learn about how these parameters work is to experiment with the GUI. All
       parameters correspond exactly to a setting available in the GUI. Not all parameters in the GUI have
       corresponding command-line options.

       --wb=camera|auto
           White balance setting. "camera" means that UFRaw tries to read the color-temperature and green color
           component that the camera recorded in the meta-information in the raw-file. This does not work for
           all cameras. If UFRaw fails to read the white-balance information from the meta-information, it falls
           back to "auto".

           "auto" means that UFRaw calculates the color-temperature and green color component automatically from
           the image data.

           The white-balance can also be set manually with the --temperature and --green options.

       --temperature=TEMP
           Manually set the color temperature in Kelvin.

       --green=GREEN
           Green color component. Range 0.20 to 2.50.

       --gamma=GAMMA
           Gamma adjustment of the base curve. Range 0.10 to 1.00. Default 0.45.

       --linearity=LINEARITY
           Linearity of the base curve. Range 0.00 to 1.00. Default 0.10.

       --exposure=auto|EXPOSURE
           Auto exposure or exposure correction in EV. Range -3.00 to 3.00. Default 0.

       --restore=clip|lch|hsv
           Control how highlights are restored when applying negative EV.  'clip' restores nothing and is
           therefore safe from any artifacts.  'lch' restores in LCH space, resulting in restored highlights
           with soft details (good for clouds).  'hsv' restores in HSV space, resulting in restored highlights
           with sharp details.  The default is 'lch'.

       --clip=digital|film
           Control how highlights are clipped when applying positive EV.  'digital' corresponds to using a
           linear response, emulating the harsh behaviour of the digital sensor.  'film' emulate the soft film
           response.  The default is 'digital'.

       --saturation=SAT
           Adjust the color saturation. Range 0.00 to 8.00. Default 1.0, use 0 for black & white output.

       --wavelet-denoising-threshold=THRESHOLD
           Wavelet denoising threshold (default 0.0).

       --base-curve=manual|linear|custom|camera|CURVE
           Type of tone curve to use. The base curve is a combination of the gamma curve corrected by the curve
           specified here.  The base curve is applied to each channel of the raw data after the white balance
           and color matrix, but before the ICC transformation.

           "manual" means that a manual tone curve is used.  This is probably not very useful as a command-line
           option, since there is no way to specify what the curve should look like.

           "linear" means that no tone curve corrections is performed.

           "custom" means that UFRaw shall use the curve supplied by the camera in the meta-information in the
           raw-file.

           "camera" means that UFRaw shall use the "custom" curve only if the camera was set to use it
           (according to the meta-information).  Otherwise the "linear" curve is used.

           CURVE can be the filename (without path) of any curve that was previously loaded in the GUI.

           The default is "camera" if such a curve exists, linear otherwise.

       --base-curve-file=<curve-file>
           Load the base curve from a file.  The curve file format can be either UFRaw's XML format or Nikon's
           NTC/NCV format.

       --curve=manual|linear|CURVE
           Type of luminosity curve to use. This curve is applied in HSV space and therefore hue and saturation
           should not be effected by it.

           "manual" means that a manual luminosity curve is used.  This is probably not very useful as a
           command-line option, since there is no way to specify what the curve should look like.

           "linear" means that no luminosity correction is performed.

           CURVE can be the filename (without path) of any curve that was previously loaded in the GUI.

           The default is "linear".

       --curve-file=<curve-file>
           Load the luminosity curve from a file.  The curve file format can be either UFRaw's XML format or
           Nikon's NTC/NCV format.

       --black-point=auto|BLACK
           Black-point value. Range 0.0 to 1.0, default 0.0.

       --interpolation=ahd|vng|four-color|ppg|bilinear
           Interpolation algorithm to use when converting from the color filter array to normal RGB values. AHD
           (Adaptive Homogeneity Directed) interpolation is the best, but also the slowest. VNG (Variable Number
           Gradients) is second best and a bit faster. Bilinear is the simplest yet fastest interpolation.

           "four-color" is a variation of the VNG interpolation that should only be used if you see strange
           square patterns in the VNG interpolation, See <http://www.cybercom.net/~dcoffin/dcraw/>.

           AHD is the default interpolation.  AHD interpolation is not supported for cameras with four color
           filters, such as the Sony-828 RGBE filter. In such cases, VNG interpolation will be used instead.

       --color-smoothing
           Apply color smoothing.

       --grayscale=none|lightness|luminance|value|mixer
           Grayscale conversion algorithm to use (default none).

       --darkframe=FILE
           Use FILE for raw darkframe subtraction.

   Output Options
       The options which are related to the final output are:

       --shrink=FACTOR
           Shrink the image by FACTOR (default 1).

       --size=SIZE
           Downsize max(height,width) to SIZE.

       --rotate=camera|ANGLE|no
           Rotate image to camera's setting, by ANGLE degrees clockwise, or do not rotate the image (default
           camera)

       --crop-(left|right|top|bottom)=PIXELS
           Crop the output to the given pixel range, relative to the raw image after rotation but before any
           scaling.

       --out-type=ppm|tiff|tif|png|jpeg|jpg|fits
           Output file-format to use.  The default output file-format is ppm.

       --out-depth=8|16
           Output bit depth per channel.  ppm, tiff, png and fits output formats can uses either 8 bits or 16
           bits to encode each of the  Red, Green and Blue components of each pixel.  The jpeg format only
           allows for 8 bits for each color component.

           The raw-files contain more than eight bits of information for each color component. This means that
           by using an eight bit format, you are actually discarding some of the information supplied by the
           camera. This is not a problem if you only plan to view the image on screen. For prints you should
           consider a 16 bits workflow.

       --compression=VALUE
           JPEG quality factor. Range 0-100 with a higher number giving a higher quality at the cost of a larger
           file. Default 85. The --compression parameter is only relevant if the output file-format is jpeg.

       --[no]exif
           Embed exif in output. Default embed exif. Exif is currently embedded in JPEG, PNG and TIFF output.

       --[no]zip
           Enable [disable] TIFF zip compression. The zip-compression is loss-less.  Default nozip. The --zip
           parameter is only relevant if the output file-format if tiff8 or tiff16.

       --out-path=PATH
           PATH for output file. In batch mode by default, output-files are placed in the same directory as the
           input-files. In interactive mode UFRaw tries to ''guess'' if you have a favorite output directory.

       --output=FILE
           Output file name to use. This is only relevant if a single raw-file is supplied on the command-line.
           . Use '-' to output to stdout. The default is to name the output-file the same as the input-file but
           with the extension given by the output file-format.

       --overwrite
           Overwrite existing files without asking. Default is to ask before deleting an existing file.

       --create-id=no|also|only
           Control whether UFRaw ID files are created for the output image.  (Default is no).

       --embedded-image
           Extract the preview image embedded in the raw file instead of converting the raw image. This option
           is only valid with 'ufraw-batch'.

Conversion Setting Priority

       Conversion settings are applied in the following priority order:

       1. Command-line options
       2. Settings from the configuration file specified with --conf=<ID-file> (ignoring any filenames in the
       ID-file).
       3. Settings from an ID-file supplied as an input-file.
       4. Settings from $HOME/.ufrawrc
       5. UFRaw's default settings.

       This means that an option supplied on the command-line always takes precedence over all other options.

       The conversion settings can be changed in the GUI before the resulting image is saved.

FILES

       $HOME/.ufrawrc - UFRaw resource file containing the user default settings.  This is an XML file that can
       be modified with any text editor. Still, it is recommended not to edit this file. This file is updated
       from the GUI when you save an image, or when you explicitly ask to save this file in the 'Options' menu.

       $HOME/.ufraw-gtkrc - An optional file for setting up a specific GTK theme for UFRaw.

ONLINE RESOURCES

       UFRaw homepage: <http://ufraw.sourceforge.net>
       DCRaw homepage: <http://www.cybercom.net/~dcoffin/dcraw>

SEE ALSO

       The GIMP homepage: <http://www.gimp.org>