xenial (1) v.net.salesman.1grass.gz
NAME
v.net.salesman - Creates a cycle connecting given nodes (Traveling salesman problem).
Note that TSP is NP-hard, heuristic algorithm is used by this module and created cycle may be sub optimal
KEYWORDS
vector, network, salesman
SYNOPSIS
v.net.salesman
v.net.salesman --help
v.net.salesman [-g] input=name output=name [arc_layer=string] [arc_type=string[,string,...]]
[node_layer=string] [arc_column=string] [arc_backward_column=string] [sequence=name]
center_cats=range [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
-g
Use geodesic calculation for longitude-latitude locations
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog
Parameters:
input=name [required]
Name of input vector map
Or data source for direct OGR access
output=name [required]
Name for output vector map
arc_layer=string
Arc layer
Vector features can have category values in different layers. This number determines which layer to
use. When used with direct OGR access this is the layer name.
Default: 1
arc_type=string[,string,...]
Arc type
Options: line, boundary
Default: line,boundary
node_layer=string
Node layer (used for cities)
Vector features can have category values in different layers. This number determines which layer to
use. When used with direct OGR access this is the layer name.
Default: 2
arc_column=string
Arc forward/both direction(s) cost column (number)
arc_backward_column=string
EXPERIMENTAL: Arc backward direction cost column (number)
sequence=name
Name for output file holding node sequence ("-" for stdout)
center_cats=range [required]
Category values
Categories of points (’cities’) on nodes (layer is specified by nlayer)
DESCRIPTION
v.net.salesman calculates the optimal route to visit nodes on a vector network.
Costs may be either line lengths, or attributes saved in a database table. These attribute values are
taken as costs of whole segments, not as costs to traverse a length unit (e.g. meter) of the segment.
For example, if the speed limit is 100 km / h, the cost to traverse a 10 km long road segment must be
calculated as
length / speed = 10 km / (100 km/h) = 0.1 h.
Supported are cost assignments for arcs, and also different costs for both directions of a vector line.
For areas, costs will be calculated along boundary lines.
The input vector needs to be prepared with v.net operation=connect in order to connect points
representing center nodes to the network.
Points specified by category must be exactly on network nodes, and the input vector map needs to be
prepared with v.net operation=connect.
NOTES
Arcs can be closed using cost = -1.
EXAMPLE
Traveling salesman for 6 digitized nodes (Spearfish):
Shortest path, along unimproved roads:
Fastest path, along highways:
Searching for the shortest path using distance and the fastest path using traveling time according to the
speed limits of different road types:
# Spearfish
g.copy vect=roads,myroads
# we have 6 locations to visit on our trip
echo "1|601653.5|4922869.2|a
2|608284|4923776.6|b
3|601845|4914981.9|c
4|596270|4917456.3|d
5|593330.8|4924096.6|e
6|598005.5|4921439.2|f" | v.in.ascii in=- cat=1 x=2 y=3 out=centers col="cat integer, \
east double precision, north double precision, label varchar(43)"
# verify data preparation
v.db.select centers
v.category centers op=report
# type count min max
# point 6 1 6
# create lines map connecting points to network (on layer 2)
v.net myroads points=centers out=myroads_net op=connect thresh=500
v.category myroads_net op=report
# Layer / table: 1 / myroads_net
# type count min max
# line 837 1 5
#
# Layer: 2
# type count min max
# point 6 1 5
# find the shortest path
v.net.salesman myroads_net center_cats=1-6 out=mysalesman_distance
# set up costs as traveling time
# create unique categories for each road in layer 3
v.category in=myroads_net out=myroads_net_time opt=add cat=1 layer=3 type=line
# add new table for layer 3
v.db.addtable myroads_net_time layer=3 col="cat integer,label varchar(43),length double precision,speed double precision,cost double precision,bcost double precision"
# copy road type to layer 3
v.to.db myroads_net_time layer=3 qlayer=1 opt=query qcolumn=label columns=label
# upload road length in miles
v.to.db myroads_net_time layer=3 type=line option=length col=length unit=miles
# set speed limits in miles / hour
v.db.update myroads_net_time layer=3 col=speed val="5.0"
v.db.update myroads_net_time layer=3 col=speed val="75.0" where="label=’interstate’"
v.db.update myroads_net_time layer=3 col=speed val="75.0" where="label=’primary highway, hard surface’"
v.db.update myroads_net_time layer=3 col=speed val="50.0" where="label=’secondary highway, hard surface’"
v.db.update myroads_net_time layer=3 col=speed val="25.0" where="label=’light-duty road, improved surface’"
v.db.update myroads_net_time layer=3 col=speed val="5.0" where="label=’unimproved road’"
# define traveling costs as traveling time in minutes:
# set forward costs
v.db.update myroads_net_time layer=3 col=cost val="length / speed * 60"
# set backward costs
v.db.update myroads_net_time layer=3 col=bcost val="length / speed * 60"
# find the fastest path
v.net.salesman myroads_net_time arc_layer=3 node_layer=2 arc_column=cost arc_backward_column=bcost center_cats=1-6 out=mysalesman_time
To display the result, run for example:
# Display the results
g.region vector=myroads_net
# shortest path
d.mon x0
d.vect myroads_net
d.vect centers -c icon=basic/triangle
d.vect mysalesman_distance col=green width=2
d.font Vera
d.vect centers col=red disp=attr attrcol=label lsize=12
# fastest path
d.mon x1
d.vect myroads_net
d.vect centers -c icon=basic/triangle
d.vect mysalesman_time col=green width=2
d.font Vera
d.vect centers col=red disp=attr attrcol=label lsize=12
SEE ALSO
d.path, v.net, v.net.alloc, v.net.iso, v.net.path, v.net.steiner
AUTHOR
Radim Blazek, ITC-Irst, Trento, Italy
Markus Metz
Documentation: Markus Neteler, Markus Metz
Last changed: $Date: 2014-12-24 15:44:33 +0100 (Wed, 24 Dec 2014) $
Main index | Vector index | Topics index | Keywords index | Full index
© 2003-2016 GRASS Development Team, GRASS GIS 7.0.3 Reference Manual