xenial (3) Config::Model::models::LCDd::CFontzPacket.3pm.gz

NAME

       Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '560'.

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Model
       Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd
       is inactive. Optional. Type integer. upstream_default: '0'.

   OldFirmware
       Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command
       (31). For those devices it may be necessary to enable this flag. Optional. Type boolean.
       upstream_default: 'no'.

   Reboot
       Reinitialize the LCD's BIOS on driver start. Optional. Type boolean. upstream_default: 'no'.

   Size
       Override the LCD size known for the selected model. Usually setting this value should not be
       necessary.Optional. Type uniline. upstream_default: '20x4'.

   Speed
       Override the default communication speed known for the selected model.  Default value depends on model
       Optional. Type enum. choice: '19200', '115200'.

   USB
       Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled.
       Optional. Type boolean. upstream_default: 'no'.

SEE ALSO

       •   cme