Provided by: libmath-basecnv-perl_1.8.B59BrZX-2_all 
NAME
Math::BaseCnv - fast functions to CoNVert between number Bases
VERSION
This documentation refers to version 1.8.B59BrZX of Math::BaseCnv, which was released on
Mon May 9 11:53:35:33 2011.
SYNOPSIS
use Math::BaseCnv;
# CoNVert 63 from base-10 (decimal) to base- 2 (binary )
$binary_63 = cnv( 63, 10, 2 );
# CoNVert 111111 from base- 2 (binary ) to base-16 (hex )
$hex_63 = cnv( 111111, 2, 16 );
# CoNVert 3F from base-16 (hex ) to base-10 (decimal)
$decimal_63 = cnv( '3F', 16, 10 );
print "63 dec->bin $binary_63 bin->hex $hex_63 hex->dec $decimal_63\n";
DESCRIPTION
BaseCnv provides a few simple functions for converting between arbitrary number bases. It
is as fast as I currently know how to make it (of course relying only on the lovely Perl).
If you would rather utilize an object syntax for number-base conversion, please see Ken
Williams' <Ken@Forum.Swarthmore.Edu> fine Math::BaseCalc module.
PURPOSE
The reason I created BaseCnv was that I needed a simple way to convert quickly between the
3 number bases I use most (10, 16, && 64). It turned out that it was trivial to handle any
arbitrary number base that is represented as characters. High-bit ASCII has proven
somewhat problemmatic but at least BaseCnv can simply && realiably convert between any
possible base between 2 && 64 (or 85). I'm happy with it && employ b64() in places I
probably shouldn't now =).
USAGE
cnv($numb[,$from[,$tobs]])
CoNVert the number contained in $numb from its current number base ($from) into the result
number base ($tobs).
When only $numb is provided as a parameter:
If $numb only contains valid decimal (base 10) digits, it will be converted to hexadecimal
(base 16).
If $numb only contains valid hexadecimal (base 16) digits or begins with '0x', it will be
it will be converted to decimal (base 10).
When only $numb && $from are provided as parameters:
cnv() assumes that $numb is already in decimal format && uses $from as the $tobs.
When all three parameters are provided:
The normal (&& most clear) usage of cnv() is to provide all three parameters where $numb
is converted from $from base to $tobs.
cnv() is the only function that is exported from a normal 'use Math::BaseCnv;' command.
The other functions below can be imported to local namespaces explicitly or with the
following tags:
:all - every function described here
:hex - only dec() && hex()
:b64 - only b10() && b64() && b64sort() && cnv()
:dig - only dig() && diginit()
:sfc - only summ(), fact(), && choo()
b10($b64n)
A shortcut to convert the number given as a parameter ($b64n) from base 64 to decimal
(base 10).
b64($b10n)
A shortcut to convert the number given as a parameter ($b10n) from decimal (base 10) to
base 64.
b64sort(@b64s)
A way to sort b64 strings as though they were decimal numbers.
dec($b16n)
A shortcut to convert the number given as a parameter ($b16n) from hexadecimal (base 16)
to decimal (base 10).
hex($b10n)
A shortcut to convert the number given as a parameter ($b10n) from decimal (base 10) to
hexadecimal (base 16).
Please read the "NOTES" regarding hex().
dig(\@newd)
Assign the new digit character list to be used in place of the default one. dig() can also
alternately accept a string name matching one of the following predefined digit sets:
'bin' => ['0', '1']
'oct' => ['0'..'7']
'dec' => ['0'..'9']
'hex' => ['0'..'9', 'a'..'f']
'HEX' => ['0'..'9', 'A'..'F']
'b62' => ['0'..'9', 'a'..'z', 'A'..'Z']
'b64' => ['0'..'9', 'A'..'Z', 'a'..'z', '.', '_']
'm64' => ['A'..'Z', 'a'..'z', '0'..'9', '+', '/'] # MIME::Base64
'iru' => ['A'..'Z', 'a'..'z', '0'..'9', '[', ']'] # IRCu
'url' => ['A'..'Z', 'a'..'z', '0'..'9', '-', '_'] # MIME::Base64::URLSafe
'rex' => ['A'..'Z', 'a'..'z', '0'..'9', '!', '-'] # RegEx
'id0' => ['A'..'Z', 'a'..'z', '0'..'9', '_', '-'] # ID 0
'id1' => ['A'..'Z', 'a'..'z', '0'..'9', '.', '_'] # ID 1
'xnt' => ['A'..'Z', 'a'..'z', '0'..'9', '.', '-'] # XML Nmtoken
'xid' => ['A'..'Z', 'a'..'z', '0'..'9', '_', ':'] # XML ID Name
'b85' => ['0'..'9', 'A'..'Z', 'a'..'z', '!', '#', # RFC 1924 for
'$', '%', '&', '(', ')', '*', '+', '-', # IPv6 addrs
';', '<', '=', '>', '?', '@', '^', '_', # like in
'`', '{', '|', '}', '~' ] # Math::Base85
If no \@newd list or digit set name is provided as a parameter, dig() returns the current
character list. It's fine to have many more characters in your current digit set than will
be used with your conversions (e.g., using dig('b64') works fine for any cnv() call with
$from && $tobs params less than or equal to 64).
An example of a \@newd parameter for a specified alternate digit set for base 9
conversions is:
dig( [ qw( n a c h o z y u m ) ] );
diginit()
Resets the used digit list to the initial default order of the predefined digit set:
'b64'. This is simply a shortcut for calling dig('b64') for reinitialization purposes.
summ($numb)
A simple function to calculate a memoized BigInt summation of $numb down to 1.
fact($numb)
A simple function to calculate a memoized BigInt factorial of $numb.
choo($ennn, $emmm)
A simple function to calculate a memoized BigInt function of $ennn choose $emmm.
NOTES
The Perl builtin hex() function takes a hex string as a parameter && returns the decimal
value (FromBase = 16, ToBase = 10) but this notation seems counter-intuitive to me since a
simple reading of the code suggests that a hex() function will turn your parameter into
hexadecimal (i.e., It sounds like Perl's hex() will hexify your parameter but it does
not.) so I've decided (maybe foolishly) to invert the notation for my similar functions
since it makes more sense to me this way && will be easier to remember (I've had to lookup
hex() in the Camel book many times already which was part of the impetus for this
module... as well as the gut reaction that sprintf() is not a proper natural inverse
function for hex()).
This means that my b64() function takes a decimal number as a parameter && returns the
base64 equivalent (FromBase = 10, ToBase = 64) && my b10() function takes a base64 number
(string) && returns the decimal value (FromBase = 64, ToBase = 10). My hex() function
overloads Perl's builtin version with this opposite behavior so my dec() function behaves
like Perl's normal hex() function. I know it's confusing && maybe bad form of me to do
this but I like it so much better this way that I'd rather go against the grain.
Please think of my dec() && hex() functions as meaning decify && hexify. Also the
pronunciation of dec() is 'dess' (!'deck' which would be the inverse of 'ink' which -- &&
++ already do so well). After reading the informative Perl module etiquette guidelines, I
now appreciate the need to export as little as is necessary by default. So to be
responsible, I have limited BaseCnv exporting to only cnv() under normal circumstances.
Please specify the other functions you'd like to import into your namespace or use the
tags described above in the cnv() section like:
'use Math::BaseCnv qw(:all !:hex);'
Error checking is minimal.
This module does not handle fractional number inputs because I like using the dot (.)
character as a standard base64 digit since it makes for clean filenames.
summ(), fact(), && choo() are general Math function utilities which are unrelated to
number-base conversion but I didn't feel like making another separate module just for them
so they snuck in here.
I hope you find Math::BaseCnv useful. Please feel free to e-mail me any suggestions or
coding tips or notes of appreciation ("app-ree-see-ay-shun"). Thank you. TTFN.
2DU
- better error checking
- handle fractional parts? umm but I like using '.' as a b64 char so ',' comma or some
other separator?
- What else does BaseCnv need?
CHANGES
Revision history for Perl extension Math::BaseCnv:
- 1.8.B59BrZX Mon May 9 11:53:35:33 2011
* updated 'url' digit set to URLSafe to resolve
HTTPS://RT.CPAN.Org/Ticket/Display.html?id=60125
* updated license copyright years (already had GPLv3)
- 1.6.A6FGHKE Tue Jun 15 16:17:20:14 2010
* bumped minor version number so they'll keep ascending (without PT comprehension)
- 1.4.A6FAbEb Tue Jun 15 10:37:14:37 2010
* added Math::BigInt code for >64-bit number-base conversions
* added a bunch more DigitSets: IRCu, URL, RegEx, identifier variants, XML Nmtoken, &&
XML ID Name
- 1.4.75O6Pbr Thu May 24 06:25:37:53 2007
* added Test::Pod(::Coverage)? tests && PREREQ entries
* added b85 for IPv6, gen'd META.yml (w/ newline before EOF), up'd minor ver
- 1.2.68J9uJQ Sat Aug 19 09:56:19:26 2006
* added b64sort() && put pod at bottom
- 1.2.59M7mRX Thu Sep 22 07:48:27:33 2005
* testing Make as primary and BuildPL backup (needing rename for dot)
- 1.2.59IBlgw Sun Sep 18 11:47:42:58 2005
* testing just using Module::Build instead of MakeMaker
* fixed test 12 which was failing on AMD64
* added Build.PL to pkg
- 1.2.54HK3pB Sun Apr 17 20:03:51:11 2005
* removed 128 digit-set since some hi-bit chars cause probs on Win32
* made bin/cnv only executable to go in EXE_FILES
* made Math::BaseCalc a link in pod && updated License
- 1.2.45UC8fo Sun May 30 12:08:41:50 2004
* tidied POD && upped minor version number since CPAN can't read PTVR
- 1.0.44E9ljP Wed Apr 14 09:47:45:25 2004
* added test for div-by-zero error in choo()
* added summ()
- 1.0.446EIbS Tue Apr 6 14:18:37:28 2004
* snuck in fact() && choo()
- 1.0.42REDir Fri Feb 27 14:13:44:53 2004
* changed test.pl to hopefully pass MSWin32-x86-multi-thread
- 1.0.428LV46 Sun Feb 8 21:31:04:06 2004
* broke apart CHANGES to descend chronologically
* made dec() auto uppercase param since dec(a) was returning 36 instead of 10
- 1.0.41M4GMP Thu Jan 22 04:16:22:25 2004
* put cnv in bin/ as EXE_FILES
- 1.0.418BEPc Thu Jan 8 11:14:25:38 2004
* testing new e auto-gen MANIFEST(.SKIP)?
- 1.0.3CNH37s Tue Dec 23 17:03:07:54 2003
* updated POD
- 1.0.3CG3dIx Tue Dec 16 03:39:18:59 2003
* normalized base spelling
- 1.0.3CD1Vdd Sat Dec 13 01:31:39:39 2003
* added ABSTRACT section to WriteMakeFile()
* changed synopsis example
* updated all POD indenting
- 1.0.3CCA5Mi Fri Dec 12 10:05:22:44 2003
* removed indenting from POD NAME field
- 1.0.3CB7M43 Thu Dec 11 07:22:04:03 2003
* updated package to coincide with Time::Fields release
- 1.0.39B36Lv Thu Sep 11 03:06:21:57 2003
* synchronized POD with README documentation using new e utility
* templatized package compilation
* fixed boundary bugs
- 1.0.37SLNGN Mon Jul 28 21:23:16:23 2003
* first version (&& my first Perl module... yay!) put on CPAN
- 1.0.37JKj3w Sat Jul 19 20:45:03:58 2003
* reworked interface from shell utility to package
- 1.0.3159mLT Sun Jan 5 09:48:21:29 2003
* original version
INSTALL
Please run:
`perl -MCPAN -e "install Math::BaseCnv"`
or uncompress the package && run:
`perl Makefile.PL; make; make test; make install`
or if you don't have `make` but Module::Build is installed
`perl Build.PL; perl Build; perl Build test; perl Build install`
LICENSE
Most source code should be Free! Code I have lawful authority over is && shall be!
Copyright:(c) 2003-2011, Pip Stuart. Copyleft : This software is licensed under the GNU
General Public License (version 3). Please consult the Free Software Foundation
(HTTP://FSF.Org)
for important information about your freedom.
AUTHOR
Pip Stuart <Pip@CPAN.Org>