NAME

       doc_tutorials_application-integration_md - Introduction Applications should use Elektra to read (and
       store) configurations for a overall better integrated system. A light integration would be to write
       parsers for the configuration files of your application as Elektra plugin. This yields following
       advantages:

       • applications and administrators can easily change individual values

       • import/export of configuration

       For a full integration, however, the application needs to be patched to directly access Elektra's key
       database. When the application is fully integrated in the Elektra's ecosystem additional benefits arise:

       • Benefits that shared libraries have, e.g.

         • All applications profit from fixes, optimization and new features

         • Less memory consumption, because the libraries executable instructions are only loaded once

         • Faster development time, because many non-trivial problems (e.g. OS-dependent resolving of
           configuration file names with atomic updates) are already solved and tested properly

       • The administrator can choose:

         • the configuration file syntax (e.g. XML or JSON)

         • notification and logging on configuration changes

         • and all other features the plugins provide

       • Other applications can use your configuration as override or as fallback

   Elektrify
       The process to make applications aware of other's configuration is called 'to elektrify'. This tutorial
       is both for new and existing applications.

       When a software starts to use Elektra, it is called to be elektrified. The places where configuration is
       parsed or generated must be located. Afterwards, Elektra's data structures must be used instead at these
       locations. In Elektra 0.7, that was nearly everything the software developer could do.

       Now more optional possibilities are open. First, the parser and generator code can be moved to a storage
       plugin without having to rewrite additional parts. Doing this, the syntax of the configuration file stays
       exactly the same as it was before. The application immediately profits from Elektra's infrastructure
       solving basic issues like update and conflict detection and resolving of the file name.

       Moreover, a huge variety of plugins can be utilised to extend the functionality of the configuration
       system and the programmer can write supplementary plugins. They can do syntactic checks, write out events
       in their log files and notify users if configuration has changed. So we get a bunch of plugins that are
       reusable, and we gain a lot because every other program can also access the configuration of this
       software.

       For new software the situation is similar. Additionally, there is the option to reuse mature and well-
       tested plugins to achieve the optimal result for configuration. New applications simply do not have the
       burden to stay compatible with the configuration system they had to before. But they can also use self-
       written plugins for adding needed behaviour or cross-cutting concerns.

       To sum up, if a developer wants to elektrify software, he or she can do that without any need for changes
       to the outside world regarding the format and semantics of the configuration. But in the interconnected
       world it is only a matter of time until other software also wants to access the configuration, and with
       elektrified software it is possible for every application to do so.

   Get Started
       As first step in a C-applicaiton you need to create an in-memory Key. Such a Key is Elektra's atomic unit
       and consists of:

       • a unique name

       • a value

       • meta data

       Keys are either associated with entries in configuration files or used as arguments in the API to
       transport some information.

       Thus a key is only in-memory and does not need any of the other Elektra's objects we always can create
       one:

           Key *parentKey = keyNew("/sw/org/myapp/#0/current",
                   KEY_CACADING_NAME,
                   KEY_END);

       • The first argument of keyNew always is the name of the key.

         • sw is for software

         • org is a URL/organisation name to avoid name clashes with other application names. Use only one part
           of the URL/organisation, so e.g. kde is enough.

         • myapp is the name of the most specific component that has its own configuration

         • #0 is the version number of the configuration

         • current is the profile to be used. This is needed by administrators if they want to start up multiple
           applications with different configurations.

       • KEY_CACADING_NAME is needed to accept a name starting with /. Such a name cannot physically exist in
         configuration files, but they are the most important keys to actually work with configuration within
         applications as we will see in this tutorial.

       • KEY_END is needed because C needs a proper termination of variable length arguments.

       See API doc of Key for more information.

       Now we have the Key we will use to pass as argument. First we open our key database (KDB). This is done
       by:

           KDB *repo = kdbOpen(parentKey);

       A Key is seldom alone, but they are often found in groups, e.g. in configuration files. To represent many
       keys (a set of keys) Elektra has the data structure KeySet. Because the Key's name is unique we can
       easily lookup keys in a KeySet without ambiguity. Additionally, we can can iterate over all Keys in a
       KeySet without a hassle. To create an empty KeySet we use:

           KeySet *conf = ksNew(200,
                   KS_END);

       • 200 is an approximation for how many Keys we think we will have in the KeySet conf

       • After the first argument we can list hardcoded keys.

       • The last argument needs to be KS_END.

       Now we have everything ready to fetch the latest configuration:

           kdbGet(repo, conf, parentKey);

   Lookup
       To lookup a key, we simply use, e.g.:

           Key *k = ksLookupByName(conf,
                   "/sw/org/myapp/#0/current/section/subsection/key",
                   0);

       We see in that example that only Elektra pathes are hardcoded in the application, no configuration file
       or similar. Thus we are interested in the value we use:

           char *val = keyString(k);

       Finally, we need to convert the configuration value to the datatype we need.

       Obviously, to do this manually has severe drawbacks:

       • names are hardcoded: might have typos or might be inconsistent

       • tedious handling if key or value might be absent

       • converting to needed data type is error prone

       So (larger) applications should not directly use the KeySet, but instead use code generation that
       provides a type-safe front-end.

       For more information about that, continue reading here

   Specification
       Now, we have a fully working configuration system without any hard-coded information (such as
       configuration files). So we already gained something. But, we did not discuss how we can actually achieve
       application integration, the goal of Elektra.

       Elektra 0.8.11 introduces the so called specification for the application's configuration. It is located
       below its own namespace spec (next to user and system).

       Keys in spec allow us to specify which keys are read by the application, which fallback they might have
       and which is the default value using meta data. The implementation of these features happened in
       ksLookup. When cascading keys (those starting with /) are used following features are now available (in
       the meta data of respective spec-keys):

       • override/#: use these keys in favour of the key itself (note that # is the syntax for arrays, e.g. #0
         for the first element, #_10 for the 11th and so on)

       • namespace/#: instead of using all namespaces in the predefined order, one can specify which namespaces
         should be searched in which order

       • fallback/#: when no key was found in any of the (specified) namespaces the fallback-keys will be
         searched

       • default: this value will be used if nothing else was found

       This technique provides complete transparency how a program will fetch a configuration value. In practice
       that means that:

       kdb get "/sw/org/myapp/#0/current/section/subsection/key",

       will give you the exact same value as the application gets when it uses the above lookup C-code.

       What we do not see in the program above are the default values and fallbacks. They are only present in
       the so specification (namespace spec). Luckily, the specification are (meta) key/value pairs, too. So we
       do not have to learn something new.

       So lets say, that another application otherapp exactly has the value we actually want. We want to better
       integrate the system, that in the case we do not have a value for
       /sw/org/myapp/#0/current/section/subsection/key we want to use
       /sw/otherorg/otherapp/#0/current/section/subsection/key.

       So we specify:

       kdb setmeta spec/sw/org/myapp/#0/current/section/subsection/key "fallback/#0" /sw/otherorg/otherapp/#0/current/section/subsection/key

       Voila, we have done a system integration between myapp and otherapp!

       Note that the fallback, override and cascading works on key level, and not like most other systems have
       implemented, on configuration file level.

   Conclusion
       Elektra does not hardcode any configuration data in your application. Using the default specification, we
       even can startup applications without any configuration file at all and still do not have anything
       hardcoded in the applications binary. Furthermore, by only using cascading keys for kdbGet() and
       ksLookup() Elektra gives you a possibility to specify how configuration data should be retrieved. In this
       specification you can define, that configuration data from other applications or shared places should be
       considered or even preferred. Doing so, we can achieve configuration integration.

   SEE ALSO
       • for advanced techniques e.g. transformations

Version 0.8.14                                   Tue Dec 15 20doc_tutorials_application-integration_md(3elektra)