Provided by: freebsd-manpages_10.1~RC1-1_all bug

NAME

     ng_lmi — frame relay LMI protocol netgraph node type

SYNOPSIS

     #include <sys/types.h>
     #include <netgraph/ng_lmi.h>

DESCRIPTION

     The lmi node type performs the frame relay LMI protocol.  It supports the ITU Annex A, ANSI
     Annex D, and Group-of-four LMI types.  It also supports auto-detection of the LMI type.

     To enable a specific LMI type, connect the corresponding hook (annexA, annexD, or group4) to
     DLCI 0 or 1023 of a ng_frame_relay(4) node.  Typically, Annex A and Annex D live on DLCI 0
     while Group-of-four lives on DLCI 1023.

     To enable LMI type auto-detection, connect the auto0 hook to DLCI 0 and the auto1023 hook to
     DLCI 1023.  The node will attempt to automatically determine which LMI type is running at
     the switch, and go into that mode.

     Only one fixed LMI type, or auto-detection, can be active at any given time.

     The NGM_LMI_GET_STATUS control message can be used at any time to query the current status
     of the LMI protocol and each DLCI channel.  This node also supports the NGM_TEXT_STATUS
     control message.

HOOKS

     This node type supports the following hooks:

     annexA    ITU Annex A LMI hook.

     annexD    ANSI Annex D LMI hook.

     group4    Group-of-four LMI hook.

     auto0     Auto-detection hook for DLCI 0.

     auto1023  Auto-detection hook for DLCI 1023.

CONTROL MESSAGES

     This node type supports the generic control messages, plus the following:

     NGM_LMI_GET_STATUS
          This command returns status information in a struct nglmistat:

              #define NGM_LMI_STAT_ARYSIZE   (1024/8)

              struct nglmistat {
                u_char  proto[12];    /* Active proto (same as hook name) */
                u_char  hook[12];     /* Active hook */
                u_char  fixed;        /* If set to fixed LMI mode */
                u_char  autod;        /* If currently auto-detecting */
                u_char  seen[NGM_LMI_STAT_ARYSIZE];   /* DLCIs ever seen */
                u_char  up[NGM_LMI_STAT_ARYSIZE];     /* DLCIs currently up */
              };

     NGM_TEXT_STATUS
          This generic message returns is a human-readable version of the node status.

SHUTDOWN

     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have
     been disconnected.

SEE ALSO

     netgraph(4), ng_frame_relay(4), ngctl(8)

     ANSI T1.617-1991 Annex D.

     ITU-T Q.933 Digital Subscriber Signaling System No. 1 - Signaling Specification for Frame
     Mode Basic Call Control, Annex A.

HISTORY

     The ng_lmi node type was implemented in FreeBSD 4.0.

AUTHORS

     Julian Elischer <julian@FreeBSD.org>