xenial (5) audisp-remote.conf.5.gz
NAME
audisp-remote.conf - the audisp-remote configuration file
DESCRIPTION
audisp-remote.conf is the file that controls the configuration of the audit remote logging subsystem. The
options that are available are as follows:
remote_server
This is a one word character string that is the remote server hostname or address that this plugin
will send log information to. This can be the numeric address or a resolvable hostname.
port This option is an unsigned integer that indicates what port to connect to on the remote machine.
local_port
This option is an unsigned integer that indicates what local port to connect from on the local
machine. If unspecified (the default) or set to the word any then any available unpriviledged
port is used. This is a security mechanism to prevent untrusted user space apps from injecting
events into the audit daemon. You should set it to an unused port < 1024 to ensure that only
privileged users can bind to that port. Then also set the tcp_client_ports in the aggregating
auditd.conf file to match the ports that clients are sending from.
transport
This parameter tells the remote logging app how to send events to the remote system. The only
valid value right now is tcp. If set to tcp, the remote logging app will just make a normal clear
text connection to the remote system. This is not used if kerberos is enabled.
mode This parameter tells the remote logging app what strategy to use getting records to the remote
system. Valid values are immediate, and forward . If set to immediate, the remote logging app
will attempt to send events immediately after getting them. forward means that it will store the
events to disk and then attempt to send the records. If the connection cannot be made, it will
queue records until it can connect to the remote system. The depth of the queue is controlled by
the queue_depth option.
queue_file
Path of a file used for the event queue if mode is set to forward. The default is
/var/spool/audit/remote.log.
queue_depth
This option is an unsigned integer that determines how many records can be buffered to disk or in
memory before considering it to be a failure sending. This parameter affects the forward mode of
the mode option and internal queueing for temporary network outtages. The default depth is 2048.
format This parameter tells the remote logging app what data format will be used for the messages sent
over the network. The default is managed which adds some overhead to ensure each message is
properly handled on the remote end, and to receive status messages from the remote server. If
ascii is given instead, each message is a simple ASCII text line with no overhead at all. If mode
is set to forward, format must be managed.
network_retry_time
The time, in seconds, between retries when a network error is detected. Note that this pause
applies starting after the second attempt, so as to avoid unneeded delays if a reconnect is
sufficient to fix the problem. The default is 1 second.
max_tries_per_record
The maximum number of times an attempt is made to deliver each message. The minimum value is one,
as even a completely successful delivery requires at least one try. If too many attempts are
made, the network_failure_action action is performed. The default is 3.
max_time_per_record
The maximum amount of time, in seconds, spent attempting to deliver each message. Note that both
this and max_tries_per_record should be set, as each try may take a long time to time out. The
default value is 5 seconds. If too much time is used on a message, the network_failure_action
action is performed.
heartbeat_timeout
This parameter determines how often in seconds the client should send a heartbeat event to the
remote server. This is used to let both the client and server know that each end is alive and has
not terminated in a way that it did not shutdown the connection uncleanly. This value must be
coordinated with the server's tcp_client_max_idle setting. The default value is 0 which disables
sending a heartbeat.
network_failure_action
This parameter tells the system what action to take whenever there is an error detected when
sending audit events to the remote system. Valid values are ignore, syslog, exec, suspend, single,
halt, and stop. If set to ignore, the remote logging app does nothing. Syslog means that it will
issue a warning to syslog. This is the default. exec /path-to-script will execute the script.
You cannot pass parameters to the script. Suspend will cause the remote logging app to stop
sending records to the remote system. The logging app will still be alive. The single option will
cause the remote logging app to put the computer system in single user mode. The stop option will
cause the remote logging app to exit, but leave other plugins running. The halt option will cause
the remote logging app to shutdown the computer system.
disk_low_action
Likewise, this parameter tells the system what action to take if the remote end signals a disk low
error. The default is to ignore it.
disk_full_action
Likewise, this parameter tells the system what action to take if the remote end signals a disk
full error. The default is to ignore it.
disk_error_action
Likewise, this parameter tells the system what action to take if the remote end signals a disk
error. The default is to log it to syslog.
remote_ending_action
Likewise, this parameter tells the system what action to take if the remote end signals a disk
error. This action has one additional option, reconnect which tells the remote plugin to attempt
to reconnect to the server upon receipt of the next audit record. If it is unsuccessful, the audit
record could be lost. The default is to reconnect.
generic_error_action
Likewise, this parameter tells the system what action to take if the remote end signals an error
we don't recognize. The default is to log it to syslog.
generic_warning_action
Likewise, this parameter tells the system what action to take if the remote end signals a warning
we don't recognize. The default is to log it to syslog.
queue_error_action
Likewise, this parameter tells the system what action to take if there is a problem working with a
local record queue. The default is to exit.
overflow_action
This parameter tells the system what action to take if the internal event queue overflows. Valid
values are ignore, syslog, suspend, single, and halt . If set to ignore, the remote logging app
does nothing. Syslog means that it will issue a warning to syslog. This is the default. Suspend
will cause the remote logging app to stop sending records to the remote system. The logging app
will still be alive. The single option will cause the remote logging app to put the computer
system in single user mode. The halt option will cause the remote logging app to shutdown the
computer system.
enable_krb5
If set to "yes", Kerberos 5 will be used for authentication and encryption. Default is "no".
Note that encryption can only be used with managed connections, not plain ASCII.
krb5_principal
If specified, This is the expected principal for the server. The client and server will use the
specified principal to negotiate the encryption. The format for the krb5_principal is like
somename/hostname, see the auditd.conf man page for details. If not specified, the
krb5_client_name and remote_server values are used.
krb5_client_name
This specifies the name portion of the client's own principal. If unspecified, the default is
"auditd". The remainder of the principal will consist of the host's fully qualified domain name
and the default Kerberos realm, like this: auditd/host14.example.com@EXAMPLE.COM (assuming you
gave "auditd" as the krb_client_name). Note that the client and server must have the same
principal name and realm.
krb5_key_file
Location of the key for this client's principal. Note that the key file must be owned by root and
mode 0400. The default is /etc/audisp/audisp-remote.key
NOTES
Specifying a local port may make it difficult to restart the audit subsystem due to the previous
connection being in a TIME_WAIT state, if you're reconnecting to and from the same hosts and ports as
before.
The network failure logic works as follows: The first attempt to deliver normally "just works". If it
doesn't, a second attempt is immediately made, perhaps after reconnecting to the server. If the second
attempt also fails, audispd-remote pauses for the configured time and tries again. It continues to pause
and retry until either too many attempts have been made or the allowed time expires. Note that these
times govern the maximum amount of time the remote server is allowed in order to reboot, if you want to
maintain logging across a reboot.
SEE ALSO
audispd(8), audisp-remote(8), auditd.conf(5).
AUTHOR
Steve Grubb