Provided by: firewalld_0.4.0-1ubuntu0.1_all 
NAME
firewalld.dbus - firewalld D-Bus interface description
OBJECT PATHS
This is the basic firewalld object path structure. The used interfaces are explained below
in the section called “INTERFACES”.
/org/fedoraproject/FirewallD1
Interfaces
org.fedoraproject.FirewallD1
org.fedoraproject.FirewallD1.direct
org.fedoraproject.FirewallD1.ipset
org.fedoraproject.FirewallD1.policies
org.fedoraproject.FirewallD1.zone
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
/org/fedoraproject/FirewallD1/config
Interfaces
org.fedoraproject.FirewallD1.config
org.fedoraproject.FirewallD1.config.direct
org.fedoraproject.FirewallD1.config.policies
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
/org/fedoraproject/FirewallD1/config/zone/i
Interfaces
org.fedoraproject.FirewallD1.config.zone
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
/org/fedoraproject/FirewallD1/config/service/i
Interfaces:
org.fedoraproject.FirewallD1.config.service
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
/org/fedoraproject/FirewallD1/config/ipset/i
Interfaces
org.fedoraproject.FirewallD1.config.ipset
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
/org/fedoraproject/FirewallD1/config/icmptype/i
Interfaces
org.fedoraproject.FirewallD1.config.icmptype
org.freedesktop.DBus.Introspectable
org.freedesktop.DBus.Properties
INTERFACES
org.fedoraproject.FirewallD1
This interface contains general runtime operations, like: reloading, panic mode, default
zone handling, getting services and icmp types and their settings.
Methods
authorizeAll() → Nothing
Initiate authorization for the complete firewalld D-Bus interface. This method it
mostly useful for configuration applications.
completeReload() → Nothing
Reload firewall completely, even netfilter kernel modules. This will most likely
terminate active connections, because state information is lost. This option
should only be used in case of severe firewall problems. For example if there are
state information problems that no connection can be established with correct
firewall rules.
disablePanicMode() → Nothing
Disable panic mode. After disabling panic mode established connections might work
again, if panic mode was enabled for a short period of time.
Possible errors: NOT_ENABLED, COMMAND_FAILED
enablePanicMode() → Nothing
Enable panic mode. All incoming and outgoing packets are dropped, active
connections will expire. Enable this only if there are serious problems with your
network environment.
Possible errors: ALREADY_ENABLED, COMMAND_FAILED
getDefaultZone() → s
Return default zone.
getIcmpTypeSettings(s: icmptype) → (sssas)
Return runtime settings of given icmptype. For getting permanent settings see
org.fedoraproject.FirewallD1.config.icmptype.Methods.getSettings. Settings are in
format: version, name, description, array of destinations.
version (s): see version attribute of icmptype tag in firewalld.icmptype(5).
name (s): see short tag in firewalld.icmptype(5).
description (s): see description tag in firewalld.icmptype(5).
destinations (as): array, either empty or containing strings 'ipv4' or 'ipv6', see
destination tag in firewalld.icmptype(5).
Possible errors: INVALID_ICMPTYPE
getServiceSettings(s: service) → (sssa(ss)asa{ss}as)
Return runtime settings of given service. For getting permanent settings see
org.fedoraproject.FirewallD1.config.service.Methods.getSettings. Settings are in
format: version, name, description, array of ports (port, protocol), array of
module names, dictionary of destinations and array of protocols.
version (s): see version attribute of service tag in firewalld.service(5).
name (s): see short tag in firewalld.service(5).
description (s): see description tag in firewalld.service(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.service(5).
module names (as): array of kernel netfilter helpers, see module tag in
firewalld.service(5).
destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key
can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).
protocols (as): array of protocols, see protocol tag in firewalld.service(5).
Possible errors: INVALID_SERVICE
getZoneSettings(s: zone) → (sssbsasa(ss)asba(ssss)asasasas)
Return runtime settings of given zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getSettings. Settings are in
format: version, name, description, UNUSED, target, array of services, array of
ports (port, protocol), array of icmp-blocks, masquerade, array of forward-ports
(port, protocol, to-port, to-addr), array of interfaces, array of sources, array
of rich rules and array of protocols.
version (s): see version attribute of zone tag in firewalld.zone(5).
name (s): see short tag in firewalld.zone(5).
description (s): see description tag in firewalld.zone(5).
UNUSED (b): this boolean value is no longer used for anything.
target (s): see target attribute of zone tag in firewalld.zone(5).
services (as): array of service names, see service tag in firewalld.zone(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.zone(5).
icmp-blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).
masquerade (b): see masquerade tag in firewalld.zone(5).
forward-ports (a(ssss)): array of (port, protocol, to-port, to-addr). See
forward-port tag in firewalld.zone(5).
interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).
source addresses (as): array of source addresses. See source tag in
firewalld.zone(5).
rich rules (as): array of rich-language rules. See rule tag in firewalld.zone(5).
protocols (as): array of protocols, see protocol tag in firewalld.zone(5).
Possible errors: INVALID_ZONE
listIcmpTypes() → as
Return array of names (s) of icmp types in runtime configuration. For permanent
configuration see org.fedoraproject.FirewallD1.config.Methods.listIcmpTypes.
listServices() → as
Return array of service names (s) in runtime configuration. For permanent
configuration see org.fedoraproject.FirewallD1.config.Methods.listServices.
queryPanicMode() → b
Return true if panic mode is enabled, false otherwise. In panic mode all incoming
and outgoing packets are dropped.
reload() → Nothing
Reload firewall rules and keep state information. Current permanent configuration
will become new runtime configuration, i.e. all runtime only changes done until
reload are lost with reload if they have not been also in permanent configuration.
runtimeToPermanent() → Nothing
Make runtime settings permanent. Replaces permanent settings with runtime settings
for zones, services, icmptypes, direct and policies (lockdown whitelist).
Possible errors: RT_TO_PERM_FAILED
setDefaultZone(s: zone) → Nothing
Set default zone for connections and interfaces where no zone has been selected to
zone. Setting the default zone changes the zone for the connections or interfaces,
that are using the default zone. This is a runtime and permanent change.
Possible errors: ZONE_ALREADY_SET, COMMAND_FAILED
Signals
DefaultZoneChanged(s: zone)
Emitted when default zone has been changed to zone.
PanicModeDisabled()
Emitted when panic mode has been deactivated.
PanicModeEnabled()
Emitted when panic mode has been activated.
Reloaded()
Emitted when firewalld has been reloaded. Also emitted for a complete reload.
Properties
BRIDGE - b - (ro)
Indicates whether the firewall has ethernet bridge support.
IPv4 - b - (ro)
Indicates whether the firewall has IPv4 support.
IPv6 - b - (ro)
Indicates whether the firewall has IPv6 support.
IPv6_rpfilter - b - (ro)
Indicates whether the reverse path filter test on a packet for IPv6 is enabled. If
a reply to the packet would be sent via the same interface that the packet arrived
on, the packet will match and be accepted, otherwise dropped.
interface_version - s - (ro)
firewalld D-Bus interface version string.
state - s - (ro)
firewalld state. This can be either INIT or RUNNING. In INIT state, firewalld is
starting up and initializing.
version - s - (ro)
firewalld version string.
org.fedoraproject.FirewallD1.ipset
Operations in this interface allows to get, add, remove and query runtime ipset settings.
For permanent configuration see org.fedoraproject.FirewallD1.config.ipset interface.
Methods
addEntry(s: ipset, s: entry) → as
Add a new entry to ipset. The entry must match the type of the ipset. If the ipset
is using the timeout option, it is not possible to see the entries, as they are
timing out automatically in the kernel. For permanent operation see
org.fedoraproject.FirewallD1.config.ipset.Methods.addEntry.
Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT
getEntries(s: ipset) → Nothing
Get all entries added to the ipset. If the ipset is using the timeout option, it
is not possible to see the entries, as they are timing out automatically in the
kernel. Return value is a array of entry. For permanent operation see
org.fedoraproject.FirewallD1.config.ipset.Methods.getEntries.
Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT
getSettings(s: ipset) → (ssssa{ss}as)
Return runtime settings of given ipset. For getting permanent settings see
org.fedoraproject.FirewallD1.config.ipset.Methods.getSettings. Settings are in
format: version, name, description, type, dictionary of options and array of
entries.
version (s): see version attribute of ipset tag in firewalld.ipset(5).
name (s): see short tag in firewalld.ipset(5).
description (s): see description tag in firewalld.ipset(5).
type (s): see type attribute of ipset tag in firewalld.ipset(5).
options (a{ss}): dictionary of {option : value} . See options tag in
firewalld.ipset(5).
entries (as): array of entries, see entry tag in firewalld.ipset(5).
Possible errors: INVALID_IPSET
getIPSets() → as
Return array of ipset names (s) in runtime configuration. For permanent
configuration see org.fedoraproject.FirewallD1.config.Methods.listIPSets.
queryService(s: ipset, s: entry) → b
Return whether entry has been added to ipset. For permanent operation see
org.fedoraproject.FirewallD1.config.ipset.Methods.queryEntry.
Possible errors: INVALID_IPSET
queryService(s: ipset) → b
Return whether ipset is defined in runtime configuration.
removeEntry(s: ipset, s: entry) → as
Removes an entry from ipset. For permanent operation see
org.fedoraproject.FirewallD1.config.ipset.Methods.removeEntry.
Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT
Signals
EntryAdded(s: ipset, s: entry)
Emitted when entry has been added to ipset.
EntryRemoved(s: ipset, s: entry)
Emitted when entry has been removed from ipset.
org.fedoraproject.FirewallD1.direct
This interface enables more direct access to the firewall. It enables runtime manipulation
with chains and rules. For permanent configuration see
org.fedoraproject.FirewallD1.config.direct interface.
Methods
addChain(s: ipv, s: table, s: chain) → Nothing
Add a new chain to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). Make sure there's no other chain with this name already. There
already exist basic chains to use with direct methods, for example INPUT_direct
chain. These chains are jumped into before chains for zones, i.e. every rule put
into INPUT_direct will be checked before rules in zones. For permanent operation
see org.fedoraproject.FirewallD1.config.direct.Methods.addChain.
Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED, COMMAND_FAILED
addPassthrough(s: ipv, as: args) → Nothing
Add a tracked passthrough rule with the arguments args for ipv being either ipv4
(iptables) or ipv6 (ip6tables) or eb (ebtables). Valid commands in args are only
-A/--append, -I/--insert and -N/--new-chain. This method is (unlike passthrough
method) tracked, i.e. firewalld remembers it. It's useful with
org.fedoraproject.FirewallD1.Methods.runtimeToPermanent For permanent operation
see org.fedoraproject.FirewallD1.config.direct.Methods.addPassthrough.
Possible errors: INVALID_IPV, ALREADY_ENABLED, COMMAND_FAILED
addRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
Add a rule with the arguments args to chain in table with priority for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). The priority is used
to order rules. Priority 0 means add rule on top of the chain, with a higher
priority the rule will be added further down. Rules with the same priority are on
the same level and the order of these rules is not fixed and may change. If you
want to make sure that a rule will be added after another one, use a low priority
for the first and a higher for the following. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.addRule.
Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED, COMMAND_FAILED
getAllChains() → a(sss)
Get all chains added to all tables in format: ipv, table, chain. This concerns
only chains previously added with addChain. Return value is a array of (ipv,
table, chain). For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.getAllChains.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
table (s): one of filter, mangle, nat, raw, security
chain (s): name of a chain.
getAllPassthroughs() → a(sas)
Get all tracked passthrough rules added in all ipv types in format: ipv, rule.
This concerns only rules previously added with addPassthrough. Return value is a
array of (ipv, array of arguments). For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.getAllPassthroughs.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getAllRules() → a(sssias)
Get all rules added to all chains in all tables in format: ipv, table, chain,
priority, rule. This concerns only rules previously added with addRule. Return
value is a array of (ipv, table, chain, priority, array of arguments). For
permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.getAllRules.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
table (s): one of filter, mangle, nat, raw, security
chain (s): name of a chain.
priority (i): used to order rules.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getChains(s: ipv, s: table) → as
Return an array of chains (s) added to table for ipv being either ipv4 (iptables)
or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added
with addChain. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.getChains.
Possible errors: INVALID_IPV, INVALID_TABLE
getPassthroughs(s: ipv) → aas
Get tracked passthrough rules added in either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). This concerns only rules previously added with addPassthrough.
Return value is a array of (array of arguments). For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.getPassthroughs.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getRules(s: ipv, s: table, s: chain) → a(ias)
Get all rules added to chain in table for ipv being either ipv4 (iptables) or ipv6
(ip6tables) or eb (ebtables). This concerns only rules previously added with
addRule. Return value is a array of (priority, array of arguments). For permanent
operation see org.fedoraproject.FirewallD1.config.direct.Methods.getRules.
priority (i): used to order rules.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
Possible errors: INVALID_IPV, INVALID_TABLE
passthrough(s: ipv, as: args) → s
Pass a command through to the firewall. ipv can be either ipv4 (iptables) or ipv6
(ip6tables) or eb (ebtables). args can be all iptables, ip6tables and ebtables
command line arguments. args can be all iptables, ip6tables and ebtables command
line arguments. This command is untracked, which means that firewalld is not able
to provide information about this command later on.
Possible errors: COMMAND_FAILED
queryChain(s: ipv, s: table, s: chain) → b
Return whether a chain exists in table for ipv being either ipv4 (iptables) or
ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with
addChain. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.queryChain.
Possible errors: INVALID_IPV, INVALID_TABLE
queryPassthrough(s: ipv, as: args) → b
Return whether a tracked passthrough rule with the arguments args exists for ipv
being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns
only rules previously added with addPassthrough. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.queryPassthrough.
Possible errors: INVALID_IPV
queryRule(s: ipv, s: table, s: chain, i: priority, as: args) → b
Return whether a rule with priority and the arguments args exists in chain in
table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
This concerns only rules previously added with addRule. For permanent operation
see org.fedoraproject.FirewallD1.config.direct.Methods.queryRule.
Possible errors: INVALID_IPV, INVALID_TABLE
removeAllPassthroughs() → Nothing
Remove all passthrough rules previously added with addPassthrough.
removeChain(s: ipv, s: table, s: chain) → Nothing
Remove a chain from table for ipv being either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). Only chains previously added with addChain can be removed this
way. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.removeChain.
Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED, COMMAND_FAILED
removePassthrough(s: ipv, as: args) → Nothing
Remove a tracked passthrough rule with arguments args for ipv being either ipv4
(iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with
addPassthrough can be removed this way. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.removePassthrough.
Possible errors: INVALID_IPV, NOT_ENABLED, COMMAND_FAILED
removeRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
Remove a rule with priority and arguments args from chain in table for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously
added with addRule can be removed this way. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.removeRule.
Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED, COMMAND_FAILED
removeRules(s: ipv, s: table, s: chain) → Nothing
Remove all rules from chain in table for ipv being either ipv4 (iptables) or ipv6
(ip6tables) or eb (ebtables). This concerns only rules previously added with
addRule. For permanent operation see
org.fedoraproject.FirewallD1.config.direct.Methods.removeRules.
Possible errors: INVALID_IPV, INVALID_TABLE
Signals
ChainAdded(s: ipv, s: table, s: chain)
Emitted when chain has been added into table for ipv being either ipv4 (iptables)
or ipv6 (ip6tables) or eb (ebtables).
ChainRemoved(s: ipv, s: table, s: chain)
Emitted when chain has been removed from table for ipv being either ipv4
(iptables) or ipv6 (ip6tables) or eb (ebtables).
PassthroughAdded(s: ipv, as: args)
Emitted when a tracked passthruogh rule with args has been added for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
PassthroughRemoved(s: ipv, as: args)
Emitted when a tracked passthrough rule with args has been removed for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
RuleAdded(s: ipv, s: table, s: chain, i: priority, as: args)
Emitted when a rule with args has been added to chain in table with priority for
ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
RuleRemoved(s: ipv, s: table, s: chain, i: priority, as: args)
Emitted when a rule with args has been removed from chain in table with priority
for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
org.fedoraproject.FirewallD1.policies
Enables firewalld to be able to lock down configuration changes from local applications.
Local applications or services are able to change the firewall configuration if they are
running as root (example: libvirt). With these operations administrator can lock the
firewall configuration so that either none or only applications that are in the whitelist
are able to request firewall changes. For permanent configuration see
org.fedoraproject.FirewallD1.config.policies interface.
Methods
addLockdownWhitelistCommand(s: command) → Nothing
Add command to whitelist. See command option in firewalld.lockdown-whitelist(5).
For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.addLockdownWhitelistCommand.
Possible errors: ALREADY_ENABLED, INVALID_COMMAND
addLockdownWhitelistContext(s: context) → Nothing
Add context to whitelist. See selinux option in firewalld.lockdown-whitelist(5).
For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.addLockdownWhitelistContext.
Possible errors: ALREADY_ENABLED, INVALID_COMMAND
addLockdownWhitelistUid(i: uid) → Nothing
Add user id uid to whitelist. See user option in firewalld.lockdown-whitelist(5).
For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.addLockdownWhitelistUid.
Possible errors: ALREADY_ENABLED, INVALID_COMMAND
addLockdownWhitelistUser(s: user) → Nothing
Add user name to whitelist. See user option in firewalld.lockdown-whitelist(5).
For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.addLockdownWhitelistUser.
Possible errors: ALREADY_ENABLED, INVALID_COMMAND
disableLockdown() → Nothing
Disable lockdown. This is a runtime and permanent change.
Possible errors: NOT_ENABLED
enableLockdown() → Nothing
Enable lockdown. Be careful - if the calling application/user is not on lockdown
whitelist when you enable lockdown you won't be able to disable it again with the
application, you would need to edit firewalld.conf. This is a runtime and
permanent change.
Possible errors: ALREADY_ENABLED
getLockdownWhitelistCommands() → as
List all command lines (s) that are on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.getLockdownWhitelistCommands.
getLockdownWhitelistContexts() → as
List all contexts (s) that are on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.getLockdownWhitelistContexts.
getLockdownWhitelistUids() → ai
List all user ids (i) that are on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.getLockdownWhitelistUids.
getLockdownWhitelistUsers() → as
List all users (s) that are on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.getLockdownWhitelistUsers.
queryLockdown() → b
Query whether lockdown is enabled.
queryLockdownWhitelistCommand(s: command) → b
Query whether command is on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.queryLockdownWhitelistCommand.
queryLockdownWhitelistContext(s: context) → b
Query whether context is on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.queryLockdownWhitelistContext.
queryLockdownWhitelistUid(i: uid) → b
Query whether user id uid is on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.queryLockdownWhitelistUid.
queryLockdownWhitelistUser(s: user) → b
Query whether user is on whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.queryLockdownWhitelistUser.
removeLockdownWhitelistCommand(s: command) → Nothing
Remove command from whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.removeLockdownWhitelistCommand.
Possible errors: NOT_ENABLED
removeLockdownWhitelistContext(s: context) → Nothing
Remove context from whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.removeLockdownWhitelistContext.
Possible errors: NOT_ENABLED
removeLockdownWhitelistUid(i: uid) → Nothing
Remove user id uid from whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.removeLockdownWhitelistUid.
Possible errors: NOT_ENABLED
removeLockdownWhitelistUser(s: user) → Nothing
Remove user from whitelist. For permanent operation see
org.fedoraproject.FirewallD1.config.policies.Methods.removeLockdownWhitelistUser.
Possible errors: NOT_ENABLED
Signals
LockdownDisabled()
Emitted when lockdown has been disabled.
LockdownEnabled()
Emitted when lockdown has been enabled.
LockdownWhitelistCommandAdded(s: command)
Emitted when command has been added to whitelist.
LockdownWhitelistCommandRemoved(s: command)
Emitted when command has been removed from whitelist.
LockdownWhitelistContextAdded(s: context)
Emitted when context has been added to whitelist.
LockdownWhitelistContextRemoved(s: context)
Emitted when context has been removed from whitelist.
LockdownWhitelistUidAdded(i: uid)
Emitted when user id uid has been added to whitelist.
LockdownWhitelistUidRemoved(i: uid)
Emitted when user id uid has been removed from whitelist.
LockdownWhitelistUserAdded(s: user)
Emitted when user has been added to whitelist.
LockdownWhitelistUserRemoved(s: user)
Emitted when user has been removed from whitelist.
org.fedoraproject.FirewallD1.zone
Operations in this interface allows to get, add, remove and query runtime zone's settings.
For permanent settings see org.fedoraproject.FirewallD1.config.zone interface.
Methods
addForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr, i: timeout) → s
Add the IPv4 forward port into zone. If zone is empty, use default zone. The port
can either be a single port number portid or a port range portid-portid. The
protocol can either be tcp or udp. The destination address is a simple IP address.
If timeout is non-zero, the operation will be active only for the amount of
seconds. For permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addForwardPort.
Returns name of zone to which the forward port was added.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL,
INVALID_ADDR, INVALID_FORWARD, ALREADY_ENABLED, INVALID_COMMAND
addIcmpBlock(s: zone, s: icmp, i: timeout) → s
Add an ICMP block icmp into zone. The icmp is the one of the icmp types firewalld
supports. To get a listing of supported icmp types use
org.fedoraproject.FirewallD1.Methods.listIcmpTypes If zone is empty, use default
zone. If timeout is non-zero, the operation will be active only for the amount of
seconds. For permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addIcmpBlock.
Returns name of zone to which the ICMP block was added.
Possible errors: INVALID_ZONE, INVALID_ICMPTYPE, ALREADY_ENABLED, INVALID_COMMAND
addInterface(s: zone, s: interface) → s
Bind interface with zone. From now on all traffic going through the interface will
respect the zone's settings. If zone is empty, use default zone. For permanent
settings see org.fedoraproject.FirewallD1.config.zone.Methods.addInterface.
Returns name of zone to which the interface was bound.
Possible errors: INVALID_ZONE, INVALID_INTERFACE, ALREADY_ENABLED, INVALID_COMMAND
addMasquerade(s: zone, i: timeout) → s
Enable IPv4 masquerade in zone. If zone is empty, use default zone. If timeout is
non-zero, masquerading will be active for the amount of seconds. For permanent
settings see org.fedoraproject.FirewallD1.config.zone.Methods.addMasquerade.
Returns name of zone in which the masquerade was enabled.
Possible errors: INVALID_ZONE, ALREADY_ENABLED, INVALID_COMMAND
addPort(s: zone, s: port, s: protocol, i: timeout) → s
Add port into zone. If zone is empty, use default zone. The port can either be a
single port number or a port range portid-portid. The protocol can either be tcp
or udp. If timeout is non-zero, the operation will be active only for the amount
of seconds. For permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addPort.
Returns name of zone to which the port was added.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL,
ALREADY_ENABLED, INVALID_COMMAND
addProtocol(s: zone, s: protocol, i: timeout) → s
Add protocol into zone. If zone is empty, use default zone. The protocol can be
any protocol supported by the system. Please have a look at /etc/protocols for
supported protocols. If timeout is non-zero, the operation will be active only for
the amount of seconds. For permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addProtocol.
Returns name of zone to which the protocol was added.
Possible errors: INVALID_ZONE, INVALID_PROTOCOL, ALREADY_ENABLED, INVALID_COMMAND
addRichRule(s: zone, s: rule, i: timeout) → s
Add rich language rule into zone. For the rich language rule syntax, please have a
look at firewalld.direct(5). If zone is empty, use default zone. If timeout is
non-zero, the operation will be active only for the amount of seconds. For
permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addRichRule.
Returns name of zone to which the rich language rule was added.
Possible errors: INVALID_ZONE, INVALID_RULE, ALREADY_ENABLED, INVALID_COMMAND
addService(s: zone, s: service, i: timeout) → s
Add service into zone. If zone is empty, use default zone. If timeout is non-zero,
the operation will be active only for the amount of seconds. To get a list of
supported services, use org.fedoraproject.FirewallD1.Methods.listServices. For
permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.addService.
Returns name of zone to which the service was added.
Possible errors: INVALID_ZONE, INVALID_SERVICE, ALREADY_ENABLED, INVALID_COMMAND
addSource(s: zone, s: source) → s
Bind source with zone. From now on all traffic going from this source will respect
the zone's settings. A source address or address range is either an IP address or
a network IP address with a mask for IPv4 or IPv6. For IPv4, the mask can be a
network mask or a plain number. For IPv6 the mask is a plain number. Use of host
names is not supported. If zone is empty, use default zone. For permanent settings
see org.fedoraproject.FirewallD1.config.zone.Methods.addSource.
Returns name of zone to which the source was bound.
Possible errors: INVALID_ZONE, INVALID_ADDR, ALREADY_ENABLED, INVALID_COMMAND
changeZone(s: zone, s: interface) → s
This function is deprecated, use
org.fedoraproject.FirewallD1.zone.Methods.changeZoneOfInterface instead.
changeZoneOfInterface(s: zone, s: interface) → s
Change a zone an interface is bound to to zone. It's basically
removeInterface(interface) followed by addInterface(zone, interface). If interface
has not been bound to a zone before, it behaves like addInterface. If zone is
empty, use default zone.
Returns name of zone to which the interface was bound.
Possible errors: INVALID_ZONE, ZONE_ALREADY_SET, ZONE_CONFLICT
changeZoneOfSource(s: zone, s: source) → s
Change a zone an source is bound to to zone. It's basically removeSource(source)
followed by addSource(zone, source). If source has not been bound to a zone
before, it behaves like addSource. If zone is empty, use default zone.
Returns name of zone to which the source was bound.
Possible errors: INVALID_ZONE, ZONE_ALREADY_SET, ZONE_CONFLICT
getActiveZones() → a{sa{sas}}
Return dictionary of currently active zones altogether with interfaces and sources
used in these zones. Active zones are zones, that have a binding to an interface
or source.
Return value is a dictionary where keys are zone names (s) and values are again
dictionaries where keys are either 'interfaces' or 'sources' and values are arrays
of interface names (s) or sources (s).
getForwardPorts(s: zone) → aas
Return array of IPv4 forward ports previously added into zone. If zone is empty,
use default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getForwardPorts.
Return value is array of 4-tuples, where each 4-tuple consists of (port, protocol,
to-port, to-addr). to-addr might be empty in case of local forwarding.
Possible errors: INVALID_ZONE
getIcmpBlocks(s: zone) → as
Return array of ICMP type (s) blocks previously added into zone. If zone is empty,
use default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getIcmpBlocks.
Possible errors: INVALID_ZONE
getInterfaces(s: zone) → as
Return array of interfaces (s) previously bound with zone. If zone is empty, use
default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getInterfaces.
Possible errors: INVALID_ZONE
getPorts(s: zone) → aas
Return array of ports (2-tuple of port and protocol) previously enabled in zone.
If zone is empty, use default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getPorts.
Possible errors: INVALID_ZONE
getProtocols(s: zone) → as
Return array of protocols (s) previously enabled in zone. If zone is empty, use
default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getProtocols.
Possible errors: INVALID_ZONE
getRichRules(s: zone) → as
Return array of rich language rules (s) previously added into zone. If zone is
empty, use default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getRichRules.
Possible errors: INVALID_ZONE
getServices(s: zone) → as
Return array of services (s) previously enabled in zone. If zone is empty, use
default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getServices.
Possible errors: INVALID_ZONE
getSources(s: zone) → as
Return array of sources (s) previously bound with zone. If zone is empty, use
default zone. For getting permanent settings see
org.fedoraproject.FirewallD1.config.zone.Methods.getSources.
Possible errors: INVALID_ZONE
getZoneOfInterface(s: interface) → s
Return name (s) of zone the interface is bound to or empty string.
getZoneOfSource(s: source) → s
Return name (s) of zone the source is bound to or empty string.
getZones() → as
Return array of names (s) of predefined zones known to current runtime
environment. For list of zones known to permanent environment see
org.fedoraproject.FirewallD1.config.Methods.listZones. The lists (of zones known
to runtime and permanent environment) will contain same zones in most cases, but
might differ for example if org.fedoraproject.FirewallD1.config.Methods.addZone
has been called recently, but firewalld has not been reloaded since then.
isImmutable(s: zone) → b
Deprecated.
queryForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr) → b
Return whether the IPv4 forward port (port, protocol, toport, toaddr) has been
added into zone. If zone is empty, use default zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryForwardPort.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL,
INVALID_ADDR, INVALID_FORWARD
queryIcmpBlock(s: zone, s: icmp) → b
Return whether an ICMP block for icmp has been added into zone. If zone is empty,
use default zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryIcmpBlock.
Possible errors: INVALID_ZONE, INVALID_ICMPTYPE
queryInterface(s: zone, s: interface) → b
Query whether interface has been bound to zone. If zone is empty, use default
zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryInterface.
Possible errors: INVALID_ZONE, INVALID_INTERFACE
queryMasquerade(s: zone) → b
Return whether IPv4 masquerading has been enabled in zone If zone is empty, use
default zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryMasquerade.
Possible errors: INVALID_ZONE
queryPort(s: zone, s: port, s: protocol) → b
Return whether port/protocol has been added in zone. If zone is empty, use default
zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryPort.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL
queryProtocol(s: zone, s: protocol) → b
Return whether protocol has been added in zone. If zone is empty, use default
zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryProtocol.
Possible errors: INVALID_ZONE, INVALID_PROTOCOL
queryRichRule(s: zone, s: rule) → b
Return whether rich rule rule has been added in zone. If zone is empty, use
default zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryRichRule.
Possible errors: INVALID_ZONE, INVALID_RULE
queryService(s: zone, s: service) → b
Return whether service has been added for zone. If zone is empty, use default
zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.queryService.
Possible errors: INVALID_ZONE, INVALID_SERVICE
querySource(s: zone, s: source) → b
Query whether sourcehas been bound to zone. If zone is empty, use default zone.
For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.querySource.
Possible errors: INVALID_ZONE, INVALID_ADDR
removeForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr) → s
Remove IPv4 forward port ((port, protocol, toport, toaddr)) from zone. If zone is
empty, use default zone. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeForwardPort.
Returns name of zone from which the forward port was removed.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL,
INVALID_ADDR, INVALID_FORWARD, NOT_ENABLED, INVALID_COMMAND
removeIcmpBlock(s: zone, s: icmp) → s
Remove ICMP block icmp from zone. If zone is empty, use default zone. For
permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeIcmpBlock.
Returns name of zone from which the ICMP block was removed.
Possible errors: INVALID_ZONE, INVALID_ICMPTYPE, NOT_ENABLED, INVALID_COMMAND
removeInterface(s: zone, s: interface) → s
Remove binding of interface from zone. If zone is empty, the interface will be
removed from zone it belongs to. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeInterface.
Returns name of zone from which the interface was removed.
Possible errors: INVALID_ZONE, INVALID_INTERFACE, NOT_ENABLED, INVALID_COMMAND
removeMasquerade(s: zone) → s
Disable IPv4 masquerade for zone. If zone is empty, use default zone. For
permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeMasquerade.
Returns name of zone for which the masquerade was disabled.
Possible errors: INVALID_ZONE, NOT_ENABLED, INVALID_COMMAND
removePort(s: zone, s: port, s: protocol) → s
Remove port/protocol from zone. If zone is empty, use default zone. For permanent
operation see org.fedoraproject.FirewallD1.config.zone.Methods.removePort.
Returns name of zone from which the port was removed.
Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL,
NOT_ENABLED, INVALID_COMMAND
removeProtocol(s: zone, s: protocol) → s
Remove protocol from zone. If zone is empty, use default zone. For permanent
operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeProtocol.
Returns name of zone from which the protocol was removed.
Possible errors: INVALID_ZONE, INVALID_PROTOCOL, NOT_ENABLED, INVALID_COMMAND
removeRichRule(s: zone, s: rule) → s
Remove rich language rule from zone. If zone is empty, use default zone. For
permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeRichRule.
Returns name of zone from which the rich language rule was removed.
Possible errors: INVALID_ZONE, INVALID_RULE, NOT_ENABLED, INVALID_COMMAND
removeService(s: zone, s: service) → s
Remove service from zone. If zone is empty, use default zone. For permanent
operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeService.
Returns name of zone from which the service was removed.
Possible errors: INVALID_ZONE, INVALID_SERVICE, NOT_ENABLED, INVALID_COMMAND
removeSource(s: zone, s: source) → s
Remove binding of source from zone. If zone is empty, the source will be removed
from zone it belongs to. For permanent operation see
org.fedoraproject.FirewallD1.config.zone.Methods.removeSource.
Returns name of zone from which the source was removed.
Possible errors: INVALID_ZONE, INVALID_ADDR, NOT_ENABLED, INVALID_COMMAND
Signals
ForwardPortAdded(s: zone, s: port, s: protocol, s: toport, s: toaddr, i: timeout)
Emitted when forward port has been added to zone with timeout.
ForwardPortRemoved(s: zone, s: port, s: protocol, s: toport, s: toaddr)
Emitted when forward port has been removed from zone.
IcmpBlockAdded(s: zone, s: icmp, i: timeout)
Emitted when ICMP block for icmp has been added to zone with timeout.
IcmpBlockRemoved(s: zone, s: icmp)
Emitted when ICMP block for icmp has been removed from zone.
InterfaceAdded(s: zone, s: interface)
Emitted when interface has been added to zone.
InterfaceRemoved(s: zone, s: interface)
Emitted when interface has been removed from zone.
MasqueradeAdded(s: zone, i: timeout)
Emitted when IPv4 masquerade has been enabled for zone.
MasqueradeRemoved(s: zone)
Emitted when IPv4 masquerade has been disabled for zone.
PortAdded(s: zone, s: port, s: protocol, i: timeout)
Emitted when port/protocol has been added to zone with timeout.
PortRemoved(s: zone, s: port, s: protocol)
Emitted when port/protocol has been removed from zone.
ProtocolAdded(s: zone, s: protocol, i: timeout)
Emitted when protocol has been added to zone with timeout.
ProtocolRemoved(s: zone, s: protocol)
Emitted when protocol has been removed from zone.
RichRuleAdded(s: zone, s: rule, i: timeout)
Emitted when rich language rule has been added to zone with timeout.
RichRuleRemoved(s: zone, s: rule)
Emitted when rich language rule has been removed from zone.
ServiceAdded(s: zone, s: service, i: timeout)
Emitted when service has been added to zone with timeout.
ServiceRemoved(s: zone, s: service)
Emitted when service has been removed from zone.
SourceAdded(s: zone, s: source)
Emitted when source has been added to zone.
SourceRemoved(s: zone, s: source)
Emitted when source has been removed from zone.
ZoneChanged(s: zone, s: interface)
Deprecated
ZoneOfInterfaceChanged(s: zone, s: interface)
Emitted when a zone an interface is part of has been changed to zone.
ZoneOfSourceChanged(s: zone, s: source)
Emitted when a zone an source is part of has been changed to zone.
org.fedoraproject.FirewallD1.config
Allows to permanently add, remove and query zones, services and icmp types.
Methods
addIPSet(s: ipset, (ssssa{ss}as): settings) → o
Add ipset with given settings into permanent configuration. Settings are in
format: version, name, description, type, dictionary of options and array of
entries.
version (s): see version attribute of ipset tag in firewalld.ipset(5).
name (s): see short tag in firewalld.ipset(5).
description (s): see description tag in firewalld.ipset(5).
type (s): see type attribute of ipset tag in firewalld.ipset(5).
options (a{ss}): dictionary of {option : value} . See options tag in
firewalld.ipset(5).
entries (as): array of entries, see entry tag in firewalld.ipset(5).
Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE
addIcmpType(s: icmptype, (sssas): settings) → o
Add icmptype with given settings into permanent configuration. Settings are in
format: version, name, description, array of destinations. Returns object path of
the new icmp type.
version (s): see version attribute of icmptype tag in firewalld.icmptype(5).
name (s): see short tag in firewalld.icmptype(5).
description (s): see description tag in firewalld.icmptype(5).
destinations (as): array, either empty or containing strings 'ipv4' or 'ipv6', see
destination tag in firewalld.icmptype(5).
Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE
addService(s: service, (sssa(ss)asa{ss}as): settings) → o
Add service with given settings into permanent configuration. Settings are in
format: version, name, description, array of ports (port, protocol), array of
module names, dictionary of destinations and array of protocols. Returns object
path of the new icmp type.
version (s): see version attribute of service tag in firewalld.service(5).
name (s): see short tag in firewalld.service(5).
description (s): see description tag in firewalld.service(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.service(5).
module names (as): array of kernel netfilter helpers, see module tag in
firewalld.service(5).
destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key
can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).
protocols (as): array of protocols. See protocol tag in firewalld.service(5).
Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE
addZone(s: zone, (sssbsasa(ss)asba(ssss)asasasas): settings) → o
Add zone with given settings into permanent configuration. Settings are in format:
version, name, description, UNUSED, target, array of services, array of ports
(port, protocol), array of icmp-blocks, masquerade, array of forward-ports (port,
protocol, to-port, to-addr), array of interfaces, array of sources, array of rich
rules and array of protocols.
version (s): see version attribute of zone tag in firewalld.zone(5).
name (s): see short tag in firewalld.zone(5).
description (s): see description tag in firewalld.zone(5).
UNUSED (b): this boolean value is no longer used for anything.
target (s): see target attribute of zone tag in firewalld.zone(5).
services (as): array of service names, see service tag in firewalld.zone(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.zone(5).
icmp-blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).
masquerade (b): see masquerade tag in firewalld.zone(5).
forward-ports (a(ssss)): array of (port, protocol, to-port, to-addr). See
forward-port tag in firewalld.zone(5).
interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).
source addresses (as): array of source addresses. See source tag in
firewalld.zone(5).
rich rules (as): array of rich-language rules. See rule tag in firewalld.zone(5).
protocols (as): array of protocols. See protocol tag in firewalld.zone(5).
Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE
getIPSetByName(s: ipset) → o
Return object path (permanent configuration) of ipset with given name.
Possible errors: INVALID_IPSET
getIcmpTypeByName(s: icmptype) → o
Return object path (permanent configuration) of icmptype with given name.
Possible errors: INVALID_ICMPTYPE
getServiceByName(s: service) → o
Return object path (permanent configuration) of service with given name.
Possible errors: INVALID_SERVICE
getZoneByName(s: zone) → o
Return object path (permanent configuration) of zone with given name.
Possible errors: INVALID_ZONE
getZoneOfInterface(s: iface) → s
Return name of zone the iface is bound to or empty string.
getZoneOfSource(s: source) → s
Return name of zone the source is bound to or empty string.
listIPSets() → ao
Return array of object paths (o) of ipset in permanent configuration. For runtime
configuration see org.fedoraproject.FirewallD1.ipset.Methods.getIPSets.
listIcmpTypes() → ao
Return array of object paths (o) of icmp types in permanent configuration. For
runtime configuration see org.fedoraproject.FirewallD1.Methods.listIcmpTypes.
listServices() → ao
Return array of objects paths (o) of services in permanent configuration. For
runtime configuration see org.fedoraproject.FirewallD1.Methods.listServices.
listZones() → ao
List object paths of zones known to permanent environment. For list of zones known
to runtime environment see org.fedoraproject.FirewallD1.zone.Methods.getZones. The
lists (of zones known to runtime and permanent environment) will contain same
zones in most cases, but might differ for example if
org.fedoraproject.FirewallD1.config.Methods.addZone has been called recently, but
firewalld has not been reloaded since then.
Signals
IcmpTypeAdded(s: icmptype)
Emitted when icmptype has been added.
ServiceAdded(s: service)
Emitted when service has been added.
ZoneAdded(s: zone)
Emitted when zone has been added.
Properties
CleanupOnExit - s - (rw)
If firewalld stops, it cleans up all firewall rules. Setting this option to no or
false leaves the current firewall rules untouched.
DefaultZone - s - (ro)
Default zone for connections or interfaces if the zone is not selected or
specified by NetworkManager, initscripts or command line tool.
IPv6_rpfilter - s - (rw)
Indicates whether the reverse path filter test on a packet for IPv6 is enabled. If
a reply to the packet would be sent via the same interface that the packet arrived
on, the packet will match and be accepted, otherwise dropped.
Lockdown - s - (rw)
If this property is enabled, firewall changes with the D-Bus interface will be
limited to applications that are listed in the lockdown whitelist.
MinimalMark - i - (rw)
For some firewall settings several rules are needed in different tables to be able
to handle packets in the correct way. To achieve that these packets are marked
using the MARK target. With the MinimalMark property a block of marks can be
reserved for private use; only marks over this value are used.
org.fedoraproject.FirewallD1.config.direct
Interface for permanent direct configuration, see also firewalld.direct(5). For runtime
direct configuration see org.fedoraproject.FirewallD1.direct interface.
Methods
addChain(s: ipv, s: table, s: chain) → Nothing
Add a new chain to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). Make sure there's no other chain with this name already. There
already exist basic chains to use with direct methods, for example INPUT_direct
chain. These chains are jumped into before chains for zones, i.e. every rule put
into INPUT_direct will be checked before rules in zones. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.addChain.
Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED
addPassthrough(s: ipv, as: args) → Nothing
Add a passthrough rule with the arguments args for ipv being either ipv4
(iptables) or ipv6 (ip6tables) or eb (ebtables). For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.addPassthrough.
Possible errors: INVALID_IPV, ALREADY_ENABLED
addRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
Add a rule with the arguments args to chain in table with priority for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). The priority is used
to order rules. Priority 0 means add rule on top of the chain, with a higher
priority the rule will be added further down. Rules with the same priority are on
the same level and the order of these rules is not fixed and may change. If you
want to make sure that a rule will be added after another one, use a low priority
for the first and a higher for the following. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.addRule.
Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED
getAllChains() → a(sss)
Get all chains added to all tables in format: ipv, table, chain. This concerns
only chains previously added with addChain. Return value is a array of (ipv,
table, chain). For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.getAllChains.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
table (s): one of filter, mangle, nat, raw, security
chain (s): name of a chain.
getAllPassthroughs() → a(sas)
Get all passthrough rules added in all ipv types in format: ipv, rule. This
concerns only rules previously added with addPassthrough. Return value is a array
of (ipv, array of arguments). For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.getAllPassthroughs.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getAllRules() → a(sssias)
Get all rules added to all chains in all tables in format: ipv, table, chain,
priority, rule. This concerns only rules previously added with addRule. Return
value is a array of (ipv, table, chain, priority, array of arguments). For runtime
operation see org.fedoraproject.FirewallD1.direct.Methods.getAllRules.
ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
table (s): one of filter, mangle, nat, raw, security
chain (s): name of a chain.
priority (i): used to order rules.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getChains(s: ipv, s: table) → as
Return an array of chains (s) added to table for ipv being either ipv4 (iptables)
or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added
with addChain. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.getChains.
Possible errors: INVALID_IPV, INVALID_TABLE
getPassthroughs(s: ipv) → aas
Get tracked passthrough rules added in either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). This concerns only rules previously added with addPassthrough.
Return value is a array of (array of arguments). For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.getPassthroughs.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
getRules(s: ipv, s: table, s: chain) → a(ias)
Get all rules added to chain in table for ipv being either ipv4 (iptables) or ipv6
(ip6tables) or eb (ebtables). This concerns only rules previously added with
addRule. Return value is a array of (priority, array of arguments). For runtime
operation see org.fedoraproject.FirewallD1.direct.Methods.getRules.
priority (i): used to order rules.
arguments (as): array of commands, parameters and other
iptables/ip6tables/ebtables command line options.
Possible errors: INVALID_IPV, INVALID_TABLE
getSettings() → (a(sss)a(sssias)a(sas))
Get settings of permanent direct configuration in format: array of chains, array
of rules, array of passthroughs.
chains (a(sss)): array of (ipv, table, chain), see 'chain' in firewalld.direct(5).
.
.PP rules (a(sssias)): array of (ipv, table, chain, priority,
array of arguments), see 'rule' in firewalld.direct(5).
.
.PP passthroughs (a(sas)): array of (ipv, array of arguments),
see passthrough in firewalld.direct(5).
.
.sp
queryChain(s: ipv, s: table, s: chain) → b
Return whether a chain exists in table for ipv being either ipv4 (iptables) or
ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with
addChain. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.queryChain.
Possible errors: INVALID_IPV, INVALID_TABLE
queryPassthrough(s: ipv, as: args) → b
Return whether a tracked passthrough rule with the arguments args exists for ipv
being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns
only rules previously added with addPassthrough. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.queryPassthrough.
Possible errors: INVALID_IPV
queryRule(s: ipv, s: table, s: chain, i: priority, as: args) → b
Return whether a rule with priority and the arguments args exists in chain in
table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).
This concerns only rules previously added with addRule. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.queryRule.
Possible errors: INVALID_IPV, INVALID_TABLE
removeChain(s: ipv, s: table, s: chain) → Nothing
Remove a chain from table for ipv being either ipv4 (iptables) or ipv6 (ip6tables)
or eb (ebtables). Only chains previously added with addChain can be removed this
way. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.removeChain.
Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED
removePassthrough(s: ipv, as: args) → Nothing
Remove a passthrough rule with arguments args for ipv being either ipv4 (iptables)
or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with
addPassthrough can be removed this way. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.removePassthrough.
Possible errors: INVALID_IPV, NOT_ENABLED
removeRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
Remove a rule with priority and arguments args from chain in table for ipv being
either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously
added with addRule can be removed this way. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.removeRule.
Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED
removeRules(s: ipv, s: table, s: chain) → Nothing
Remove all rules from chain in table for ipv being either ipv4 (iptables) or ipv6
(ip6tables) or eb (ebtables). This concerns only rules previously added with
addRule. For runtime operation see
org.fedoraproject.FirewallD1.direct.Methods.removeRules.
Possible errors: INVALID_IPV, INVALID_TABLE
update((a(sss)a(sssias)a(sas)): settings) → Nothing
Update permanent direct configuration with given settings. Settings are in format:
array of chains, array of rules, array of passthroughs.
chains (a(sss)): array of (ipv, table, chain), see 'chain' in firewalld.direct(5).
.
.PP rules (a(sssias)): array of (ipv, table, chain, priority,
array of arguments), see 'rule' in firewalld.direct(5).
.
.PP passthroughs (a(sas)): array of (ipv, array of arguments),
see passthrough in firewalld.direct(5).
.
.sp Possible errors: INVALID_TYPE
Signals
Updated()
Emitted when configuration has been updated.
org.fedoraproject.FirewallD1.config.policies
Interface for permanent lockdown-whitelist configuration, see also firewalld.lockdown-
whitelist(5). For runtime configuration see org.fedoraproject.FirewallD1.policies
interface.
Methods
addLockdownWhitelistCommand(s: command) → Nothing
Add command to whitelist. See command option in firewalld.lockdown-whitelist(5).
For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.addLockdownWhitelistCommand.
Possible errors: ALREADY_ENABLED, INVALID_TYPE
addLockdownWhitelistContext(s: context) → Nothing
Add context to whitelist. See selinux option in firewalld.lockdown-whitelist(5).
For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.addLockdownWhitelistContext.
Possible errors: ALREADY_ENABLED, INVALID_TYPE
addLockdownWhitelistUid(i: uid) → Nothing
Add user id uid to whitelist. See user option in firewalld.lockdown-whitelist(5).
For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.addLockdownWhitelistUid.
Possible errors: ALREADY_ENABLED, INVALID_TYPE
addLockdownWhitelistUser(s: user) → Nothing
Add user name to whitelist. See user option in firewalld.lockdown-whitelist(5).
For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.addLockdownWhitelistUser.
Possible errors: ALREADY_ENABLED, INVALID_TYPE
getLockdownWhitelist() → (asasasai)
Get settings of permanent lockdown-whitelist configuration in format: commands,
selinux contexts, users, uids
commands (as): see command option in firewalld.lockdown-whitelist(5).
selinux contexts (as): see selinux option in firewalld.lockdown-whitelist(5).
users (as): see name attribute of user option in firewalld.lockdown-whitelist(5).
uids (ai): see id attribute of user option in firewalld.lockdown-whitelist(5).
getLockdownWhitelistCommands() → as
List all command lines (s) that are on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.getLockdownWhitelistCommands.
getLockdownWhitelistContexts() → as
List all contexts (s) that are on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.getLockdownWhitelistContexts.
getLockdownWhitelistUids() → ai
List all user ids (i) that are on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.getLockdownWhitelistUids.
getLockdownWhitelistUsers() → as
List all users (s) that are on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.getLockdownWhitelistUsers.
queryLockdownWhitelistCommand(s: command) → b
Query whether command is on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.queryLockdownWhitelistCommand.
queryLockdownWhitelistContext(s: context) → b
Query whether context is on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.queryLockdownWhitelistContext.
queryLockdownWhitelistUid(i: uid) → b
Query whether user id uid is on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.queryLockdownWhitelistUid.
queryLockdownWhitelistUser(s: user) → b
Query whether user is on whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.queryLockdownWhitelistUser.
removeLockdownWhitelistCommand(s: command) → Nothing
Remove command from whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.removeLockdownWhitelistCommand.
Possible errors: NOT_ENABLED
removeLockdownWhitelistContext(s: context) → Nothing
Remove context from whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.removeLockdownWhitelistContext.
Possible errors: NOT_ENABLED
removeLockdownWhitelistUid(i: uid) → Nothing
Remove user id uid from whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.removeLockdownWhitelistUid.
Possible errors: NOT_ENABLED
removeLockdownWhitelistUser(s: user) → Nothing
Remove user from whitelist. For runtime operation see
org.fedoraproject.FirewallD1.policies.Methods.removeLockdownWhitelistUser.
Possible errors: NOT_ENABLED
setLockdownWhitelist((asasasai): settings) → Nothing
Set permanent lockdown-whitelist configuration to settings. Settings are in
format: commands, selinux contexts, users, uids
commands (as): see command option in firewalld.lockdown-whitelist(5).
selinux contexts (as): see selinux option in firewalld.lockdown-whitelist(5).
users (as): see name attribute of user option in firewalld.lockdown-whitelist(5).
uids (ai): see id attribute of user option in firewalld.lockdown-whitelist(5).
Possible errors: INVALID_TYPE
Signals
LockdownWhitelistUpdated()
Emitted when permanent lockdown-whitelist configuration has been updated.
org.fedoraproject.FirewallD1.config.ipset
Interface for permanent ipset configuration, see also firewalld.ipset(5).
Methods
addEntry(s: entry) → Nothing
Permanently add entry to list of entries of ipset. See entry tag in
firewalld.ipset(5). For runtime operation see
org.fedoraproject.FirewallD1.ipset.Methods.addEntry.
Possible errors: ALREADY_ENABLED
addEntry(s: key, s:value) → Nothing
Permanently add (key, value) to the ipset. See option tag in firewalld.ipset(5).
Possible errors: ALREADY_ENABLED
getDescription() → s
Get description of ipset. See description tag in firewalld.ipset(5).
getEntries() → as
Get list of entries added to ipset. See entry tag in firewalld.ipset(5). For
runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.getEntries.
Possible errors: IPSET_WITH_TIMEOUT
getEntries() → a{ss}
Get dictionary of options set for ipset. See option tag in firewalld.ipset(5).
getSettings() → (ssssa{ss}as)
Return permament settings of the ipset. For getting runtime settings see
org.fedoraproject.FirewallD1.ipset.Methods.getIPSetSettings. Settings are in
format: version, name, description, type, dictionary of options and array of
entries.
version (s): see version attribute of ipset tag in firewalld.ipset(5).
name (s): see short tag in firewalld.ipset(5).
description (s): see description tag in firewalld.ipset(5).
type (s): see type attribute of ipset tag in firewalld.ipset(5).
options (a{ss}): dictionary of {option : value} . See options tag in
firewalld.ipset(5).
entries (as): array of entries, see entry tag in firewalld.ipset(5).
getShort() → s
Get name of ipset. See short tag in firewalld.ipset(5).
getType() → s
Get type of ipset. See type attribute of ipset tag in firewalld.ipset(5).
getVersion() → s
Get version of ipset. See version attribute of ipset tag in firewalld.ipset(5).
loadDefaults() → Nothing
Load default settings for built-in ipset.
Possible errors: NO_DEFAULTS
queryEntry(s: entry) → b
Return whether entry has been added to ipset. For runtime operation see
org.fedoraproject.FirewallD1.ipset.Methods.queryEntry.
queryOption(s: key, s:value) → b
Return whether (key, value) has been added to options of the ipset.
remove() → Nothing
Remove not built-in ipset.
Possible errors: BUILTIN_IPSET
removeEntry(s: entry) → Nothing
Permanently remove entry from ipset. See entry tag in firewalld.ipset(5). For
runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.removeEntry.
Possible errors: NOT_ENABLED
removeOption(s: key, s:value) → Nothing
Permanently remove (key, value) from the ipset. See option tag in
firewalld.ipset(5).
Possible errors: NOT_ENABLED
rename(s: name) → Nothing
Rename not built-in ipset to name.
Possible errors: BUILTIN_IPSET
setDescription(s: description) → Nothing
Permanently set description of ipset to description. See description tag in
firewalld.ipset(5).
setEntries(as: entries) → Nothing
Permanently set list of entries to entries. See entry tag in firewalld.ipset(5).
setOptions(a{ss}: options) → Nothing
Permanently set dict of options to options. See option tag in firewalld.ipset(5).
setShort(s: short) → Nothing
Permanently set name of ipset to short. See short tag in firewalld.ipset(5).
setType(s: type) → Nothing
Permanently set type of ipset to type. See type attribute of ipset tag in
firewalld.ipset(5).
setVersion(s: version) → Nothing
Permanently set version of ipset to version. See version attribute of ipset tag in
firewalld.ipset(5).
update((ssssa{ss}as): settings) → Nothing
Update settings of ipset to settings. Settings are in format: version, name,
description, type, dictionary of options and array of entries.
version (s): see version attribute of ipset tag in firewalld.ipset(5).
name (s): see short tag in firewalld.ipset(5).
description (s): see description tag in firewalld.ipset(5).
type (s): see type attribute of ipset tag in firewalld.ipset(5).
options (a{ss}): dictionary of {option : value} . See options tag in
firewalld.ipset(5).
entries (as): array of entries, see entry tag in firewalld.ipset(5).
Possible errors: INVALID_TYPE
Signals
Removed(s: name)
Emitted when ipset with name has been removed.
Renamed(s: name)
Emitted when ipset has been renamed to name.
Updated(s: name)
Emitted when ipset with name has been updated.
Properties
builtin - b - (ro)
True if ipset is build-in, false else.
default - b - (ro)
True if build-in ipset has default settings. False if it has been modified. Always
False for not build-in ipsets.
filename - s - (ro)
Name (including .xml extension) of file where the configuration is stored.
name - s - (ro)
Name of ipset.
path - s - (ro)
Path to directory where the ipset configuration is stored. Should be either
/usr/lib/firewalld/ipsets or /etc/firewalld/ipsets.
org.fedoraproject.FirewallD1.config.zone
Interface for permanent zone configuration, see also firewalld.zone(5).
Methods
addForwardPort(s: port, s: protocol, s: toport, s: toaddr) → Nothing
Permanently add (port, protocol, toport, toaddr) to list of forward ports of zone.
See forward-port tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addForwardPort.
Possible errors: ALREADY_ENABLED
addIcmpBlock(s: icmptype) → Nothing
Permanently add icmptype to list of icmp types blocked in zone. See icmp-block tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addIcmpBlock.
Possible errors: ALREADY_ENABLED
addInterface(s: interface) → Nothing
Permanently add interface to list of interfaces bound to zone. See interface tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addInterface.
Possible errors: ALREADY_ENABLED
addMasquerade() → Nothing
Permanently enable masquerading in zone. See masquerade tag in firewalld.zone(5).
For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addMasquerade.
Possible errors: ALREADY_ENABLED
addPort(s: port, s: protocol) → Nothing
Permanently add (port, protocol) to list of ports of zone. See port tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addPort.
Possible errors: ALREADY_ENABLED
addProtocol(s: protocol) → Nothing
Permanently add protocol into zone. The protocol can be any protocol supported by
the system. Please have a look at /etc/protocols for supported protocols. For
runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addProtocol.
Possible errors: INVALID_PROTOCOL, ALREADY_ENABLED
addRichRule(s: rule) → Nothing
Permanently add rule to list of rich-language rules in zone. See rule tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addRichRule.
Possible errors: ALREADY_ENABLED
addService(s: service) → Nothing
Permanently add service to list of services used in zone. See service tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addService.
Possible errors: ALREADY_ENABLED
addSource(s: source) → Nothing
Permanently add source to list of source addresses bound to zone. See source tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.addSource.
Possible errors: ALREADY_ENABLED
getDescription() → s
Get description of zone. See description tag in firewalld.zone(5).
getForwardPorts() → a(ssss)
Get list of (port, protocol, toport, toaddr) defined in zone. See forward-port tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.getForwardPorts.
getIcmpBlocks() → as
Get list of icmp type names blocked in zone. See icmp-block tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.getIcmpBlocks.
getInterfaces() → as
Get list of interfaces bound to zone. See interface tag in firewalld.zone(5). For
runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getInterfaces.
getMasquerade() → b
Return whether masquerade is enabled in zone. This is the same as
queryMasquerade() method. See masquerade tag in firewalld.zone(5).
getPorts() → a(ss)
Get list of (port, protocol) defined in zone. See port tag in firewalld.zone(5).
For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getPorts.
getProtocols() → as
Return array of protocols (s) previously enabled in zone. For getting runtime
settings see org.fedoraproject.FirewallD1.zone.Methods.getProtocols.
getRichRules() → as
Get list of rich-language rules in zone. See rule tag in firewalld.zone(5). For
runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getRichRules.
getServices() → as
Get list of service names used in zone. See service tag in firewalld.zone(5). For
runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getServices.
getSettings() → (sssbsasa(ss)asba(ssss)asasasas)
Return permanent settings of given zone. For getting runtime settings see
org.fedoraproject.FirewallD1.Methods.getZoneSettings. Settings are in format:
version, name, description, UNUSED, target, array of services, array of ports
(port, protocol), array of icmp-blocks, masquerade, array of forward-ports (port,
protocol, to-port, to-addr), array of interfaces, array of sources, array of rich
rules and array of protocols.
version (s): see version attribute of zone tag in firewalld.zone(5).
name (s): see short tag in firewalld.zone(5).
description (s): see description tag in firewalld.zone(5).
UNUSED (b): this boolean value is no longer used for anything.
target (s): see target attribute of zone tag in firewalld.zone(5).
services (as): array of service names, see service tag in firewalld.zone(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.zone(5).
icmp-blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).
masquerade (b): see masquerade tag in firewalld.zone(5).
forward-ports (a(ssss)): array of (port, protocol, to-port, to-addr). See
forward-port tag in firewalld.zone(5).
interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).
source addresses (as): array of source addresses. See source tag in
firewalld.zone(5).
rich rules (as): array of rich-language rules. See rule tag in firewalld.zone(5).
protocols (as): array of protocols. See protocol tag in firewalld.zone(5).
getShort() → s
Get name of zone. See short tag in firewalld.zone(5).
getSources() → as
Get list of source addresses bound to zone. See source tag in firewalld.zone(5).
For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getSources.
getTarget() → s
Get target of zone. See target attribute of zone tag in firewalld.zone(5).
getVersion() → s
Get version of zone. See version attribute of zone tag in firewalld.zone(5).
loadDefaults() → Nothing
Load default settings for built-in zone.
Possible errors: NO_DEFAULTS
queryForwardPort(s: port, s: protocol, s: toport, s: toaddr) → b
Return whether (port, protocol, toport, toaddr) is in list of forward ports of
zone. See forward-port tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryForwardPort.
queryIcmpBlock(s: icmptype) → b
Return whether icmptype is in list of icmp types blocked in zone. See icmp-block
tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryIcmpBlock.
queryInterface(s: interface) → b
Return whether interface is in list of interfaces bound to zone. See interface tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryInterface.
queryMasquerade() → b
Return whether masquerade is enabled in zone. This is the same as getMasquerade()
method. See masquerade tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryMasquerade.
queryPort(s: port, s: protocol) → b
Return whether (port, protocol) is in list of ports of zone. See port tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryPort.
queryProtocol(s: protocol) → b
Return whether protocol has been added in zone. For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryProtocol.
Possible errors: INVALID_PROTOCOL
queryRichRule(s: rule) → b
Return whether rule is in list of rich-language rules in zone. See rule tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryRichRule.
queryService(s: service) → b
Return whether service is in list of services used in zone. See service tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.queryService.
querySource(s: source) → b
Return whether source is in list of source addresses bound to zone. See source tag
in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.querySource.
remove() → Nothing
Remove not built-in zone.
Possible errors: BUILTIN_ZONE
removeForwardPort(s: port, s: protocol, s: toport, s: toaddr) → Nothing
Permanently remove (port, protocol, toport, toaddr) from list of forward ports of
zone. See forward-port tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeForwardPort.
Possible errors: NOT_ENABLED
removeIcmpBlock(s: icmptype) → Nothing
Permanently remove icmptype from list of icmp types blocked in zone. See
icmp-block tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeIcmpBlock.
Possible errors: NOT_ENABLED
removeInterface(s: interface) → Nothing
Permanently remove interface from list of interfaces bound to zone. See interface
tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeInterface.
Possible errors: NOT_ENABLED
removeMasquerade() → Nothing
Permanently disable masquerading in zone. See masquerade tag in firewalld.zone(5).
For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeMasquerade.
Possible errors: NOT_ENABLED
removePort(s: port, s: protocol) → Nothing
Permanently remove (port, protocol) from list of ports of zone. See port tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removePort.
Possible errors: NOT_ENABLED
removeProtocol(s: protocol) → Nothing
Permanently remove protocol from zone. For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeProtocol.
Possible errors: INVALID_PROTOCOL, NOT_ENABLED
removeRichRule(s: rule) → Nothing
Permanently remove rule from list of rich-language rules in zone. See rule tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeRichRule.
Possible errors: NOT_ENABLED
removeService(s: service) → Nothing
Permanently remove service from list of services used in zone. See service tag in
firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeService.
Possible errors: NOT_ENABLED
removeSource(s: source) → Nothing
Permanently remove source from list of source addresses bound to zone. See source
tag in firewalld.zone(5). For runtime operation see
org.fedoraproject.FirewallD1.zone.Methods.removeSource.
Possible errors: NOT_ENABLED
rename(s: name) → Nothing
Rename not built-in zone to name.
Possible errors: BUILTIN_ZONE
setDescription(s: description) → Nothing
Permanently set description of zone to description. See description tag in
firewalld.zone(5).
setForwardPorts(a(ssss): ports) → Nothing
Permanently set forward ports of zone to list of (port, protocol, toport, toaddr).
See forward-port tag in firewalld.zone(5).
setIcmpBlocks(as: icmptypes) → Nothing
Permanently set list of icmp types blocked in zone to icmptypes. See icmp-block
tag in firewalld.zone(5).
setInterfaces(as: interfaces) → Nothing
Permanently set list of interfaces bound to zone to interfaces. See interface tag
in firewalld.zone(5).
setMasquerade(b: masquerade) → Nothing
Permanently set masquerading in zone to masquerade. See masquerade tag in
firewalld.zone(5).
setPorts(a(ss): ports) → Nothing
Permanently set ports of zone to list of (port, protocol). See port tag in
firewalld.zone(5).
setProtocols(as: protocols) → Nothing
Permanently set list of protocols used in zone to protocols. See protocol tag in
firewalld.zone(5).
setRichRules(as: rules) → Nothing
Permanently set list of rich-language rules to rules. See rule tag in
firewalld.zone(5).
setServices(as: services) → Nothing
Permanently set list of services used in zone to services. See service tag in
firewalld.zone(5).
setShort(s: short) → Nothing
Permanently set name of zone to short. See short tag in firewalld.zone(5).
setSources(as: sources) → Nothing
Permanently set list of source addresses bound to zone to sources. See source tag
in firewalld.zone(5).
setTarget(s: target) → Nothing
Permanently set target of zone to target. See target attribute of zone tag in
firewalld.zone(5).
setVersion(s: version) → Nothing
Permanently set version of zone to version. See version attribute of zone tag in
firewalld.zone(5).
update((sssbsasa(ss)asba(ssss)asasasas): settings) → Nothing
Update settings of zone to settings. Settings are in format: version, name,
description, UNUSED, target, array of services, array of ports (port, protocol),
array of icmp-blocks, masquerade, array of forward-ports (port, protocol, to-port,
to-addr), array of interfaces, array of sources, array of rich rules and array of
protocols.
version (s): see version attribute of zone tag in firewalld.zone(5).
name (s): see short tag in firewalld.zone(5).
description (s): see description tag in firewalld.zone(5).
UNUSED (b): this boolean value is no longer used for anything.
target (s): see target attribute of zone tag in firewalld.zone(5).
services (as): array of service names, see service tag in firewalld.zone(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.zone(5).
icmp-blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).
masquerade (b): see masquerade tag in firewalld.zone(5).
forward-ports (a(ssss)): array of (port, protocol, to-port, to-addr). See
forward-port tag in firewalld.zone(5).
interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).
source addresses (as): array of source addresses. See source tag in
firewalld.zone(5).
rich rules (as): array of rich-language rules. See rule tag in firewalld.zone(5).
protocols (as): array of protocols. See protocol tag in firewalld.zone(5).
Possible errors: INVALID_TYPE
Signals
Removed(s: name)
Emitted when zone with name has been removed.
Renamed(s: name)
Emitted when zone has been renamed to name.
Updated(s: name)
Emitted when zone with name has been updated.
Properties
builtin - b - (ro)
True if zone is build-in, false else.
default - b - (ro)
True if build-in zone has default settings. False if it has been modified. Always
False for not build-in zones.
filename - s - (ro)
Name (including .xml extension) of file where the configuration is stored.
name - s - (ro)
Name of zone.
path - s - (ro)
Path to directory where the zone configuration is stored. Should be either
/usr/lib/firewalld/zones or /etc/firewalld/zones.
org.fedoraproject.FirewallD1.config.service
Interface for permanent service configuration, see also firewalld.service(5).
Methods
addModule(s: module) → Nothing
Permanently add module to list of modules (netfilter kernel helpers) used in
service. See module tag in firewalld.service(5).
Possible errors: ALREADY_ENABLED
addPort(s: port, s: protocol) → Nothing
Permanently add (port, protocol) to list of ports in service. See port tag in
firewalld.service(5).
Possible errors: ALREADY_ENABLED
addProtocol(s: protocol) → Nothing
Permanently add protocol into zone. The protocol can be any protocol supported by
the system. Please have a look at /etc/protocols for supported protocols. See
protocol tag in firewalld.service(5).
Possible errors: INVALID_PROTOCOL, ALREADY_ENABLED
getDescription() → s
Get description of service. See description tag in firewalld.service(5).
getDestination(s: family) → s
Get destination for IP family being either 'ipv4' or 'ipv6'. See destination tag
in firewalld.service(5).
Possible errors: ALREADY_ENABLED
getDestinations() → a{ss}
Get list of destinations. Return value is a dictionary of {IP family : IP address}
where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in
firewalld.service(5).
getModules() → as
Get list of modules (netfilter kernel helpers) used in service. See module tag in
firewalld.service(5).
getPorts() → a(ss)
Get list of (port, protocol) defined in service. See port tag in
firewalld.service(5).
getProtocols() → as
Return array of protocols (s) defined in service. See protocol tag in
firewalld.service(5).
getSettings() → (sssa(ss)asa{ss}as)
Return permanent settings of a service. For getting runtime settings see
org.fedoraproject.FirewallD1.Methods.getServiceSettings. Settings are in format:
version, name, description, array of ports (port, protocol), array of module
names, dictionary of destinations and array of protocols.
version (s): see version attribute of service tag in firewalld.service(5).
name (s): see short tag in firewalld.service(5).
description (s): see description tag in firewalld.service(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.service(5).
module names (as): array of kernel netfilter helpers, see module tag in
firewalld.service(5).
destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key
can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).
protocols (as): array of protocols. See protocol tag in firewalld.service(5).
getShort() → s
Get name of service. See short tag in firewalld.service(5).
getVersion() → s
Get version of service. See version attribute of service tag in
firewalld.service(5).
loadDefaults() → Nothing
Load default settings for built-in service.
Possible errors: NO_DEFAULTS
queryDestination(s: family, s: address) → b
Return whether a destination is in dictionary of destinations of this service.
destination is in format: (IP family, IP address) where IP family can be either
'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).
queryModule(s: module) → b
Return whether module is in list of modules (netfilter kernel helpers) used in
service. See module tag in firewalld.service(5).
queryPort(s: port, s: protocol) → b
Return whether (port, protocol) is in list of ports in service. See port tag in
firewalld.service(5).
queryProtocol(s: protocol) → b
Return whether protocol is in list of protocols in service. See protocol tag in
firewalld.service(5).
remove() → Nothing
Remove not built-in service.
Possible errors: BUILTIN_SERVICE
removeDestination(s: family) → Nothing
Permanently remove a destination with family ('ipv4' or 'ipv6') from service. See
destination tag in firewalld.service(5).
Possible errors: NOT_ENABLED
removeModule(s: module) → Nothing
Permanently remove module from list of modules (netfilter kernel helpers) used in
service. See module tag in firewalld.service(5).
Possible errors: NOT_ENABLED
removePort(s: port, s: protocol) → Nothing
Permanently remove (port, protocol) from list of ports in service. See port tag in
firewalld.service(5).
Possible errors: NOT_ENABLED
removeProtocol(s: protocol) → Nothing
Permanently remove protocol from list of protocols in service. See protocol tag in
firewalld.service(5).
Possible errors: NOT_ENABLED
rename(s: name) → Nothing
Rename not built-in service to name.
Possible errors: BUILTIN_SERVICE
setDescription(s: description) → Nothing
Permanently set description of service to description. See description tag in
firewalld.service(5).
setDestination(s: family, s: address) → Nothing
Permanently set a destination address. destination is in format: (IP family, IP
address) where IP family can be either 'ipv4' or 'ipv6'. See destination tag in
firewalld.service(5).
Possible errors: ALREADY_ENABLED
setDestinations(a{ss}: destinations) → Nothing
Permanently set destinations of service to destinations, which is a dictionary of
{IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See
destination tag in firewalld.service(5).
setModules(as: modules) → Nothing
Permanently set list of modules (netfilter kernel helpers) used in service to
modules. See module tag in firewalld.service(5).
setPorts(a(ss): ports) → Nothing
Permanently set ports of service to list of (port, protocol). See port tag in
firewalld.service(5).
setProtocols(as: protocols) → Nothing
Permanently set protocols of service to list of protocols. See protocol tag in
firewalld.service(5).
setShort(s: short) → Nothing
Permanently set name of service to short. See short tag in firewalld.service(5).
setVersion(s: version) → Nothing
Permanently set version of service to version. See version attribute of service
tag in firewalld.service(5).
update((sssa(ss)asa{ss}as): settings) → Nothing
Update settings of service to settings. Settings are in format: version, name,
description, array of ports (port, protocol), array of module names, dictionary of
destinations and array of protocols.
version (s): see version attribute of service tag in firewalld.service(5).
name (s): see short tag in firewalld.service(5).
description (s): see description tag in firewalld.service(5).
ports (a(ss)): array of port and protocol pairs. See port tag in
firewalld.service(5).
module names (as): array of kernel netfilter helpers, see module tag in
firewalld.service(5).
destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key
can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).
protocols (as): array of protocols. See protocol tag in firewalld.service(5).
Possible errors: INVALID_TYPE
Signals
Removed(s: name)
Emitted when service with name has been removed.
Renamed(s: name)
Emitted when service has been renamed to name.
Updated(s: name)
Emitted when service with name has been updated.
Properties
builtin - b - (ro)
True if service is build-in, false else.
default - b - (ro)
True if build-in service has default settings. False if it has been modified.
Always False for not build-in services.
filename - s - (ro)
Name (including .xml extension) of file where the configuration is stored.
name - s - (ro)
Name of service.
path - s - (ro)
Path to directory where the configuration is stored. Should be either
/usr/lib/firewalld/services or /etc/firewalld/services.
org.fedoraproject.FirewallD1.config.icmptype
Interface for permanent icmp type configuration, see also firewalld.icmptype(5).
Methods
addDestination(s: destination) → Nothing
Permanently add a destination ('ipv4' or 'ipv6') to list of destinations of this
icmp type. See destination tag in firewalld.icmptype(5).
Possible errors: ALREADY_ENABLED
getDescription() → s
Get description of icmp type. See description tag in firewalld.icmptype(5).
getDestinations() → as
Get list of destinations. See destination tag in firewalld.icmptype(5).
getSettings() → (sssas)
Return permanent settings of icmp type. For getting runtime settings see
org.fedoraproject.FirewallD1.Methods.getIcmpTypeSettings. Settings are in format:
version, name, description, array of destinations.
version (s): see version attribute of icmptype tag in firewalld.icmptype(5).
name (s): see short tag in firewalld.icmptype(5).
description (s): see description tag in firewalld.icmptype(5).
destinations (as): array, either empty or containing strings 'ipv4' and/or 'ipv6',
see destination tag in firewalld.icmptype(5).
getShort() → s
Get name of icmp type. See short tag in firewalld.icmptype(5).
getVersion() → s
Get version of icmp type. See version attribute of icmptype tag in
firewalld.icmptype(5).
loadDefaults() → Nothing
Load default settings for built-in icmp type.
Possible errors: NO_DEFAULTS
queryDestination(s: destination) → b
Return whether a destination ('ipv4' or 'ipv6') is in list of destinations of this
icmp type. See destination tag in firewalld.icmptype(5).
remove() → Nothing
Remove not built-in icmp type.
Possible errors: BUILTIN_ICMPTYPE
removeDestination(s: destination) → Nothing
Permanently remove a destination ('ipv4' or 'ipv6') from list of destinations of
this icmp type. See destination tag in firewalld.icmptype(5).
Possible errors: NOT_ENABLED
rename(s: name) → Nothing
Rename not built-in icmp type to name.
Possible errors: BUILTIN_ICMPTYPE
setDescription(s: description) → Nothing
Permanently set description of icmp type to description. See description tag in
firewalld.icmptype(5).
setDestinations(as: destinations) → Nothing
Permanently set destinations of icmp type to destinations, which is array, either
empty or containing strings 'ipv4' and/or 'ipv6'. See destination tag in
firewalld.icmptype(5).
setShort(s: short) → Nothing
Permanently set name of icmp type to short. See short tag in
firewalld.icmptype(5).
setVersion(s: version) → Nothing
Permanently set version of icmp type to version. See version attribute of icmptype
tag in firewalld.icmptype(5).
update((sssas): settings) → Nothing
Update permanent settings of icmp type to settings. Settings are in format:
version, name, description, array of destinations.
version (s): see version attribute of icmptype tag in firewalld.icmptype(5).
name (s): see short tag in firewalld.icmptype(5).
description (s): see description tag in firewalld.icmptype(5).
destinations (as): array, either empty or containing strings 'ipv4' and/or 'ipv6',
see destination tag in firewalld.icmptype(5).
Signals
Removed(s: name)
Emitted when icmp type with name has been removed.
Renamed(s: name)
Emitted when icmp type has been renamed to name.
Updated(s: name)
Emitted when icmp type with name has been updated.
Properties
builtin - b - (ro)
True if icmptype is build-in, false else.
default - b - (ro)
True if build-in icmp type has default settings. False if it has been modified.
Always False for not build-in zones.
filename - s - (ro)
Name (including .xml extension) of file where the configuration is stored.
name - s - (ro)
Name of icmp type.
path - s - (ro)
Path to directory where the icmp type configuration is stored. Should be either
/usr/lib/firewalld/icmptypes or /etc/firewalld/icmptypes.
SEE ALSO
firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5),
firewalld.direct(5), firewalld.icmptype(5), firewalld.lockdown-whitelist(5), firewall-
offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5),
firewalld.zones(5)
NOTES
firewalld home page:
http://www.firewalld.org
More documentation with examples:
http://fedoraproject.org/wiki/FirewallD
AUTHORS
Thomas Woerner <twoerner@redhat.com>
Developer
Jiri Popelka <jpopelka@redhat.com>
Developer