Provided by: isakmpd_20041012-7.2ubuntu2_amd64 bug

NAME

     isakmpd.conf — configuration file for isakmpd

DESCRIPTION

     isakmpd.conf is the configuration file for the isakmpd daemon managing security association
     and key management for the IPsec layer of the kernel's networking stack.

     The file is of a well known type of format called .INI style, named after the suffix used by
     an overrated windowing environment for its configuration files.  This format consists of
     sections, each beginning with a line looking like:

     [Section name]
     Between the brackets is the name of the section following this section header.  Inside a
     section many tag/value pairs can be stored, each one looking like:

     Tag=Value
     If the value needs more space than fits on a single line it's possible to continue it on the
     next by ending the first with a backslash character immediately before the newline
     character.  This method can extend a value for an arbitrary number of lines.

     Comments can be put anywhere in the file by using a hash mark (‘#’).  The comment extends to
     the end of the current line.

     Often the right-hand side values consist of other section names.  This results in a tree
     structure.  Some values are treated as a list of several scalar values.  Such lists always
     use a comma character as the separator.  Some values are formatted like this: X,Y:Z, which
     is an offer/accept syntax, where X is a value we offer and Y:Z is a range of accepted
     values, inclusive.

     To activate changes to isakmpd.conf without restarting isakmpd, send a SIGHUP signal to the
     daemon process.

   Auto-generated parts of the configuration
     Some predefined section names are recognized by the daemon, avoiding the need to fully
     specify the Main Mode transforms and Quick Mode suites, protocols, and transforms.

     For Main Mode:
     {DES,BLF,3DES,CAST,AES}-{MD5,SHA}[-GRP{1,2,5,14}][-{DSS,RSA_SIG}]

     For Quick Mode:
     QM-{proto}[-TRP]-{cipher}[-{hash}][-PFS[-{group}]]-SUITE

       where
         {proto}  is either ESP or AH
         {cipher} is either DES, 3DES, CAST, BLF or AES
         {hash}   is either MD5, SHA, RIPEMD, SHA2-{256,384,512}
         {group}  is either GRP1, GRP2, GRP5 or GRP14

     For example, 3DES-SHA means: 3DES encryption, SHA hash, and authorization by pre-shared
     keys.  Similarly, QM-ESP-3DES-SHA-PFS-SUITE means: ESP protocol, 3DES encryption, SHA hash,
     and use Perfect Forward Secrecy.

     Unless explicitly stated with -GRP1, 2, 5 or 14 transforms and PFS suites use DH group 2.
     There are currently no predefined ESP+AH Quick Mode suites.

     The predefinitions include some default values for the special sections "General",
     "Keynote", "X509-certificates", and "Default-phase-1-configuration".  These default values
     are presented in the example below.

     All autogenerated values can be overridden by manual entries by using the same section and
     tag names in the configuration file.  In particular, the default phase 1 (Main or Aggressive
     Mode) and phase 2 (Quick Mode) lifetimes can be overridden by these tags under the "General"
     section;

     [General]
     Default-phase-1-lifetime=       3600,60:86400
     Default-phase-2-lifetime=       1200,60:86400

     The Main Mode lifetime currently defaults to one hour (minimum 60 seconds, maximum 1 day).
     The Quick Mode lifetime defaults to 20 minutes (minimum 60 seconds, maximum 1 day).

     Also, the default phase 1 ID can be set by creating a <Phase1-ID> section, as shown below,
     and adding this tag under the "General" section;

     [General]
     Default-phase-1-ID=             Phase1-ID-name

     [Phase1-ID-name]
     ID-type=                        USER_FQDN
     Name=                           foo@bar.com

   Roots
     General       Generic global configuration parameters

                   Default-phase-1-ID
                                 Optional default phase 1 ID name.

                   Default-phase-1-lifetime
                                 The default lifetime for autogenerated transforms (phase 1).  If
                                 unspecified, the value 3600,60:86400 is used as the default.

                   Default-phase-2-lifetime
                                 The default lifetime for autogenerated suites (phase 2).  If
                                 unspecified, the value 1200,60:86400 is used as the default.

                   Default-phase-2-suites
                                 A list of phase 2 suites that will be used when establishing
                                 dynamic SAs.  If left unspecified, QM-ESP-3DES-SHA-PFS-SUITE is
                                 used as the default.

                   Acquire-Only  If this tag is defined, isakmpd will not set up flows
                                 automatically.  This is useful when flows are configured with
                                 ipsecadm(4) or by other programs like bgpd(8).  Thus isakmpd
                                 only takes care of the SA establishment.

                   Check-interval
                                 The interval between watchdog checks of connections we want up
                                 at all times.

                   DPD-check-interval
                                 The interval between RFC 3706 (Dead Peer Detection) messages.
                                 The default value is 0 (zero), which means DPD is disabled.

                   Exchange-max-time
                                 How many seconds should an exchange maximally take to set up
                                 before we give up.

                   Listen-on     A list of IP-addresses OK to listen on.  This list is used as a
                                 filter for the set of addresses the interfaces configured
                                 provides.  This means that we won't see if an address given here
                                 does not exist on this host, and thus no error is given for that
                                 case.

                   Loglevel      A list of the form class=level, where both class and level are
                                 numbers.  This is similar to the -D command line switch of
                                 isakmpd.  See isakmpd(8) for details.

                   Logverbose    If this tag is defined, whatever the value is, verbose logging
                                 is enabled.  This is similar to the -v command line switch of
                                 isakmpd.  See isakmpd(8) for details.

                   NAT-T-Keepalive
                                 The number of seconds between NAT-T keepalive messages, sent by
                                 the peer behind NAT to keep the mapping active.  Defaults to 20.

                   Policy-file   The name of the file that contains keynote(4) policies.  The
                                 default is "/etc/isakmpd/isakmpd.policy".

                   Pubkey-directory
                                 The directory in which isakmpd.conf looks for explicitly trusted
                                 public keys.  The default is "/etc/isakmpd/pubkeys".  Read
                                 isakmpd(8) for the required naming convention of the files in
                                 here.

                   Renegotiate-on-HUP
                                 If this tag is defined, whatever the value is, isakmpd will
                                 renegotiate all current phase 2 SAs when the daemon receives a
                                 SIGHUP signal, or an ‘R’ is sent to the FIFO interface (see
                                 isakmpd(8)).

                   Retransmits   How many times should a message be retransmitted before giving
                                 up.

                   Shared-SADB   If this tag is defined, whatever the value is, some semantics of
                                 isakmpd.conf are changed so that multiple instances can run on
                                 top of one SADB and set up SAs with each other.  Specifically
                                 this means replay protection will not be asked for, and errors
                                 that can occur when updating an SA with its parameters a 2nd
                                 time will be ignored.

                   Use-Keynote   This tag controls the use of keynote(4) policy checking.  The
                                 default value is "yes", which enables the policy checking.  When
                                 set to any other value, policies will not be checked.  This is
                                 useful when policies for flows and SA establishment are arranged
                                 by other programs like ipsecadm(8) or bgpd(8).

     Phase 1       ISAKMP SA negotiation parameter root

                   <IP-address>  A name of the ISAKMP peer at the given IP-address.

                   Default       A name of the default ISAKMP peer.  Incoming phase 1 connections
                                 from other IP-addresses will use this peer name.

                                 This name is used as the section name for further information to
                                 be found.  Look at <ISAKMP-peer> below.

     Phase 2       IPsec SA negotiation parameter root

                   Connections   A list of directed IPsec "connection" names that should be
                                 brought up automatically, either on first use if the system
                                 supports it, or at startup of the daemon.  These names are
                                 section names where further information can be found.  Look at
                                 <IPsec-connection> below.  Normally any connections mentioned
                                 here are treated as part of the "Passive-connection" list we
                                 present below, however there is a flag: "Active-only" that
                                 disables this behaviour.  This too is mentioned in the <IPsec-
                                 connection> section, in the "Flags" tag.

                   Passive-connections
                                 A list of IPsec "connection" names we recognize and accept
                                 initiations for.  These names are section names where further
                                 information can be found.  Look at <IPsec-connection> below.
                                 Currently only the Local-ID and Remote-ID tags are looked at in
                                 those sections, as they are matched against the IDs given by the
                                 initiator.

     KeyNote

                   Credential-directory
                                 A directory containing directories named after IDs (IP
                                 addresses, “user@domain”, or hostnames) that contain files named
                                 “credentials” and “private_key”.

                                 The credentials file contains keynote(4) credentials that are
                                 sent to a remote IKE daemon when we use the associated ID, or
                                 credentials that we may want to consider when doing an exchange
                                 with a remote IKE daemon that uses that ID.  Note that, in the
                                 former case, the last credential in the file MUST contain our
                                 public key in its Licensees field.  More than one credentials
                                 may exist in the file.  They are separated by whitelines (the
                                 format is essentially the same as that of the policy file).  The
                                 credentials are of the same format as the policies described in
                                 isakmpd.policy(5).  The only difference is that the Authorizer
                                 field contains a public key, and the assertion is signed.
                                 Signed assertions can be generated using the keynote(1) utility.

                                 The private_key file contains the private RSA key we use for
                                 authentication.  If the directory (and the files) exist, they
                                 take precedence over X509-based authentication.

     X509-Certificates

                   Accept-self-signed
                                 If this tag is defined, whatever the value is, certificates that
                                 do not originate from a trusted CA but are self-signed will be
                                 accepted.

                   Ca-directory  A directory containing PEM certificates of certification
                                 authorities that we trust to sign other certificates.  Note that
                                 for a CA to be really trusted, it needs to be somehow referred
                                 to by policy, in isakmpd.policy(5).  The certificates in this
                                 directory are used for the actual X.509 authentication and for
                                 cross-referencing policies that refer to Distinguished Names
                                 (DNs).  Keeping a separate directory (as opposed to integrating
                                 policies and X.509 CA certificates) allows for maintenance of a
                                 list of "well known" CAs without actually having to trust all
                                 (or any) of them.

                   Cert-directory
                                 A directory containing PEM certificates that we trust to be
                                 valid.  These certificates are used in preference to those
                                 passed in messages and are required to have a subjectAltName
                                 extension containing the certificate holder identity; usually IP
                                 address, FQDN, or User FQDN, as provided by certpatch(8).

                   Private-key   The private key matching the public key of our certificate
                                 (which should be in the "Cert-directory", and have an
                                 appropriate subjectAltName field).

   Referred-to sections
     <ISAKMP-peer> Parameters for negotiation with an ISAKMP peer

                   Phase         The constant 1, as ISAKMP-peers and IPsec-connections really are
                                 handled by the same code inside isakmpd.

                   Transport     The name of the transport protocol, defaults to UDP.

                   Port          In case of UDP, the UDP port number to send to.  This is
                                 optional, the default value is 500 which is the IANA-registered
                                 number for ISAKMP.

                   Local-address
                                 The Local IP-address to use, if we are multi-homed, or have
                                 aliases.

                   Address       If existent, the IP-address of the peer.

                   Configuration
                                 The name of the ISAKMP-configuration section to use.  Look at
                                 <ISAKMP-configuration> below.  If unspecified, defaults to
                                 "Default-phase-1-configuration".

                   Authentication
                                 If existent, authentication data for this specific peer.  In the
                                 case of preshared key, this is the key value itself.

                   ID            If existent, the name of the section that describes the local
                                 client ID that we should present to our peer.  If not present,
                                 it defaults to the address of the local interface we are sending
                                 packets over to the remote daemon.  Look at <Phase1-ID> below.

                   Remote-ID     If existent, the name of the section that describes the remote
                                 client ID we expect the remote daemon to send us.  If not
                                 present, it defaults to the address of the remote daemon.  Look
                                 at <Phase1-ID> below.

                   Flags         A comma-separated list of flags controlling the further handling
                                 of the ISAKMP SA.  Currently there are no specific ISAKMP SA
                                 flags defined.

     <Phase1-ID>

                   ID-type       The ID type as given by the RFC specifications.  For phase 1
                                 this is currently IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR,
                                 IPV6_ADDR_SUBNET, FQDN, USER_FQDN or KEY_ID.

                   Address       If the ID-type is IPV4_ADDR or IPV6_ADDR, this tag should exist
                                 and be an IP-address.

                   Network       If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
                                 should exist and be a network address.

                   Netmask       If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
                                 should exist and be a network subnet mask.

                   Name          If the ID-type is FQDN, USER_FQDN or KEY_ID, this tag should
                                 exist and contain a domain name, user@domain, or other
                                 identifying string respectively.

                                 In the case of KEY_ID, note that the IKE protocol allows any
                                 octet sequence to be sent or received under this payload,
                                 potentially including non-printable ones.  isakmpd(8) can only
                                 transmit printable KEY_ID payloads, but can receive and process
                                 arbitrary KEY_ID payloads.  This effectively means that non-
                                 printable KEY_ID remote identities cannot be verified through
                                 this means, although it is still possible to do so through
                                 isakmpd.policy(5).

     <ISAKMP-configuration>

                   DOI           The domain of interpretation as given by the RFCs.  Normally
                                 IPSEC.  If unspecified, defaults to IPSEC.

                   EXCHANGE_TYPE
                                 The exchange type as given by the RFCs.  For main mode this is
                                 ID_PROT and for aggressive mode it is AGGRESSIVE.

                   Transforms    A list of proposed transforms to use for protecting the ISAKMP
                                 traffic.  These are actually names for sections further
                                 describing the transforms.  Look at <ISAKMP-transform> below.

     <ISAKMP-transform>

                   ENCRYPTION_ALGORITHM
                                 The encryption algorithm as the RFCs name it, or ANY to denote
                                 that any encryption algorithm proposed will be accepted.

                   KEY_LENGTH    For encryption algorithms with variable key length, this is
                                 where the offered/accepted keylengths are described.  The value
                                 is of the offer-accept kind described above.

                   HASH_ALGORITHM
                                 The hash algorithm as the RFCs name it, or ANY.

                   AUTHENTICATION_METHOD
                                 The authentication method as the RFCs name it, or ANY.

                   GROUP_DESCRIPTION
                                 The group used for Diffie-Hellman exponentiations, or ANY.  The
                                 names are symbolic, like MODP_768, MODP_1024, EC_155 and EC_185.

                   PRF           The algorithm to use for the keyed pseudo-random function (used
                                 for key derivation and authentication in phase 1), or ANY.

                   Life          A list of lifetime descriptions, or ANY.  In the former case,
                                 each element is in itself a name of the section that defines the
                                 lifetime.  Look at <Lifetime> below.  If it is set to ANY, then
                                 any type of proposed lifetime type and value will be accepted.

     <Lifetime>

                   LIFE_TYPE     SECONDS or KILOBYTES depending on the type of the duration.
                                 Notice that this field may NOT be set to ANY.

                   LIFE_DURATION
                                 An offer/accept kind of value, see above.  Can also be set to
                                 ANY.

     <IPsec-connection>

                   Phase         The constant 2, as ISAKMP-peers and IPsec-connections really are
                                 handled by the same code inside isakmpd.

                   ISAKMP-peer   The name of the ISAKMP-peer which to talk to in order to set up
                                 this connection.  The value is the name of an <ISAKMP-peer>
                                 section.  See above.

                   Configuration
                                 The name of the IPsec-configuration section to use.  Look at
                                 <IPsec-configuration> below.

                   Local-ID      If existent, the name of the section that describes the optional
                                 local client ID that we should present to our peer.  It is also
                                 used when we act as responders to find out what <IPsec-
                                 connection> we are dealing with.  Look at <IPsec-ID> below.

                   Remote-ID     If existent, the name of the section that describes the optional
                                 remote client ID that we should present to our peer.  It is also
                                 used when we act as responders to find out what <IPsec-
                                 connection> we are dealing with.  Look at <IPsec-ID> below.

                   Flags         A comma-separated list of flags controlling the further handling
                                 of the IPsec SA.  Currently only one flag is defined:

                                 Active-only   If this flag is given and this <IPsec-connection>
                                               is part of the phase 2 connections we
                                               automatically keep up, it will not automatically
                                               be used for accepting connections from the peer.

     <IPsec-configuration>

                   DOI           The domain of interpretation as given by the RFCs.  Normally
                                 IPSEC.  If unspecified, defaults to IPSEC.

                   EXCHANGE_TYPE
                                 The exchange type as given by the RFCs.  For quick mode this is
                                 QUICK_MODE.

                   Suites        A list of protection suites (bundles of protocols) usable for
                                 protecting the IP traffic.  Each of the list elements is a name
                                 of an <IPsec-suite> section.  See below.

     <IPsec-suite>

                   Protocols     A list of the protocols included in this protection suite.  Each
                                 of the list elements is a name of an <IPsec-protocol> section.
                                 See below.

     <IPsec-protocol>

                   PROTOCOL_ID   The protocol as given by the RFCs.  Acceptable values today are
                                 IPSEC_AH and IPSEC_ESP.

                   Transforms    A list of transforms usable for implementing the protocol.  Each
                                 of the list elements is a name of an <IPsec-transform> section.
                                 See below.

                   ReplayWindow  The size of the window used for replay protection.  This is
                                 normally left alone.  Look at the ESP and AH RFCs for a better
                                 description.

     <IPsec-transform>

                   TRANSFORM_ID  The transform ID as given by the RFCs.

                   ENCAPSULATION_MODE
                                 The encapsulation mode as given by the RFCs.  This means
                                 TRANSPORT or TUNNEL.

                   AUTHENTICATION_ALGORITHM
                                 The optional authentication algorithm in the case of this being
                                 an ESP transform.

                   GROUP_DESCRIPTION
                                 An optional (provides PFS if present) Diffie-Hellman group
                                 description.  The values are the same as GROUP_DESCRIPTION's in
                                 <ISAKMP-transform> sections shown above.

                   Life          List of lifetimes, each element is a <Lifetime> section name.

     <IPsec-ID>

                   ID-type       The ID type as given by the RFCs.  For IPsec this is currently
                                 IPV4_ADDR, IPV6_ADDR, IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET.

                   Address       If the ID-type is IPV4_ADDR or IPV6_ADDR this tag should exist
                                 and be an IP-address.

                   Network       If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
                                 should exist and be a network address.

                   Netmask       If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
                                 should exist and be a network subnet mask.

                   Protocol      If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR or
                                 IPV6_ADDR_SUBNET this tag indicates what transport protocol
                                 should be transmitted over the SA.  If left unspecified, all
                                 transport protocols between the two address (ranges) will be
                                 sent (or permitted) over that SA.

                   Port          If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR or
                                 IPV6_ADDR_SUBNET this tag indicates what source or destination
                                 port is allowed to be transported over the SA (depending on
                                 whether this is a local or remote ID).  If left unspecified, all
                                 ports of the given transport protocol will be transmitted (or
                                 permitted) over the SA.  The Protocol tag must be specified in
                                 conjunction with this tag.

   Other sections
     <IKECFG-ID>   Parameters to use with IKE mode-config.  One ID per peer.

                   An IKECFG-ID is written as [<ID-type>/<name>].  The following ID types are
                   supported:

                   IPv4          [ipv4/A.B.C.D]

                   IPv6          [ipv6/abcd:abcd::ab:cd]

                   FQDN          [fqdn/foo.bar.org]

                   UFQDN         [ufqdn/user@foo.bar.org]

                   ASN1_DN       [asn1_dn//C=aa/O=cc/...] (Note the double slashes as the DN
                                 itself starts with a ‘/’.)

                   Each section specifies what configuration values to return to the peer
                   requesting IKE mode-config.  Currently supported values are:

                   Address       The peer's network address.

                   Netmask       The peer's netmask.

                   Nameserver    The IP address of a DNS nameserver.

                   WINS-server   The IP address of a WINS server.

     <Initiator-ID>

                   During phase 1 negotiation isakmpd looks for a pre-shared key in the <ISAKMP-
                   peer> section.  If no Authentication data is specified in that section, and
                   isakmpd is not the initiator, it looks for Authentication data in a section
                   named after the initiator's phase 1 ID.  This allows mobile users with dynamic
                   IP addresses to have different shared secrets.

                   This only works for aggressive mode because in main mode the remote initiator
                   ID would not yet be known.

                   The name of the <Initiator-ID> section depends on the ID type sent by the
                   initiator.  Currently this can be:

                   IPv4          [A.B.C.D]

                   IPv6          [abcd:abcd::ab:cd]

                   FQDN          [foo.bar.org]

                   UFQDN         [user@foo.bar.org]

FILES

     /etc/isakmpd/isakmpd.conf  The default isakmpd configuration file.

     /usr/share/ipsec/isakmpd/  A directory containing some sample isakmpd configuration files.

EXAMPLES

     An example of a configuration file:

     # A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.

     [General]
     Listen-on=              10.1.0.2

     # Incoming phase 1 negotiations are multiplexed on the source IP address
     [Phase 1]
     10.1.0.1=               ISAKMP-peer-west

     # These connections are walked over after config file parsing and told
     # to the application layer so that it will inform us when traffic wants to
     # pass over them.
     This means we can do on-demand keying.
     [Phase 2]
     Connections=            IPsec-east-west

     # Default values are commented out.
     [ISAKMP-peer-west]
     Phase=                  1
     #Transport=             udp
     Local-address=          10.1.0.2
     Address=                10.1.0.1
     #Port=                  isakmp
     #Port=                  500
     #Configuration=         Default-phase-1-configuration
     Authentication=         mekmitasdigoat
     #Flags=

     [IPsec-east-west]
     Phase=                  2
     ISAKMP-peer=            ISAKMP-peer-west
     Configuration=          Default-quick-mode
     Local-ID=               Net-east
     Remote-ID=              Net-west
     #Flags=

     [Net-west]
     ID-type=                IPV4_ADDR_SUBNET
     Network=                192.168.1.0
     Netmask=                255.255.255.0

     [Net-east]
     ID-type=                IPV4_ADDR_SUBNET
     Network=                192.168.2.0
     Netmask=                255.255.255.0

     # Quick mode descriptions

     [Default-quick-mode]
     EXCHANGE_TYPE=          QUICK_MODE
     Suites=                 QM-ESP-3DES-SHA-PFS-SUITE,QM-ESP-AES-SHA-PFS-SUITE

     # Data for an IKE mode-config peer
     [asn1_dn//C=SE/L=SomeCity/O=SomeCompany/CN=SomePeer.company.com]
     Address=                192.168.1.123
     Netmask=                255.255.255.0
     Nameserver=             192.168.1.10
     WINS-server=            192.168.1.11

     # pre-shared key based on initiator's phase 1 ID
     [foo.bar.org]
     Authentication=         mekmitasdigoat

     #
     # #####################################################################
     # All configuration data below this point is not required as the example
     # uses the predefined Main Mode transform and Quick Mode suite names.
     # It is included here for completeness.  Note the default values for the
     # [General] and [X509-certificates] sections just below.
     # #####################################################################
     #

     [General]
     Policy-file=            /etc/isakmpd/isakmpd.policy
     Retransmits=            3
     Exchange-max-time=      120

     # KeyNote credential storage
     [KeyNote]
     Credential-directory=   /etc/isakmpd/keynote/

     # Certificates stored in PEM format
     [X509-certificates]
     CA-directory=           /etc/isakmpd/ca/
     Cert-directory=         /etc/isakmpd/certs/
     CRL-directory=          /etc/isakmpd/crls/
     Private-key=            /etc/isakmpd/private/local.key

     # Default phase 1 description (Main Mode)

     [Default-phase-1-configuration]
     EXCHANGE_TYPE=          ID_PROT
     Transforms=             3DES-SHA

     # Main mode transforms
     ######################

     # DES

     [DES-MD5]
     ENCRYPTION_ALGORITHM=   DES_CBC
     HASH_ALGORITHM=         MD5
     AUTHENTICATION_METHOD=  PRE_SHARED
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-1-lifetime

     [DES-SHA]
     ENCRYPTION_ALGORITHM=   DES_CBC
     HASH_ALGORITHM=         SHA
     AUTHENTICATION_METHOD=  PRE_SHARED
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-1-lifetime

     # 3DES

     [3DES-SHA]
     ENCRYPTION_ALGORITHM=   3DES_CBC
     HASH_ALGORITHM=         SHA
     AUTHENTICATION_METHOD=  PRE_SHARED
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-1-lifetime

     # Blowfish

     [BLF-SHA]
     ENCRYPTION_ALGORITHM=   BLOWFISH_CBC
     KEY_LENGTH=             128,96:192
     HASH_ALGORITHM=         SHA
     AUTHENTICATION_METHOD=  PRE_SHARED
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-1-lifetime

     # Blowfish, using DH group 4 (non-default)
     [BLF-SHA-EC185]
     ENCRYPTION_ALGORITHM=   BLOWFISH_CBC
     KEY_LENGTH=             128,96:192
     HASH_ALGORITHM=         SHA
     AUTHENTICATION_METHOD=  PRE_SHARED
     GROUP_DESCRIPTION=      EC2N_185
     Life=                   Default-phase-1-lifetime

     # Quick mode protection suites
     ##############################

     # DES

     [QM-ESP-DES-SUITE]
     Protocols=              QM-ESP-DES

     [QM-ESP-DES-PFS-SUITE]
     Protocols=              QM-ESP-DES-PFS

     [QM-ESP-DES-MD5-SUITE]
     Protocols=              QM-ESP-DES-MD5

     [QM-ESP-DES-MD5-PFS-SUITE]
     Protocols=              QM-ESP-DES-MD5-PFS

     [QM-ESP-DES-SHA-SUITE]
     Protocols=              QM-ESP-DES-SHA

     [QM-ESP-DES-SHA-PFS-SUITE]
     Protocols=              QM-ESP-DES-SHA-PFS

     # 3DES

     [QM-ESP-3DES-SHA-SUITE]
     Protocols=              QM-ESP-3DES-SHA

     [QM-ESP-3DES-SHA-PFS-SUITE]
     Protocols=              QM-ESP-3DES-SHA-PFS

     # AES

     [QM-ESP-AES-SHA-SUITE]
     Protocols=              QM-ESP-AES-SHA

     [QM-ESP-AES-SHA-PFS-SUITE]
     Protocols=              QM-ESP-AES-SHA-PFS

     # AH

     [QM-AH-MD5-SUITE]
     Protocols=              QM-AH-MD5

     [QM-AH-MD5-PFS-SUITE]
     Protocols=              QM-AH-MD5-PFS

     # AH + ESP (non-default)

     [QM-AH-MD5-ESP-DES-SUITE]
     Protocols=              QM-AH-MD5,QM-ESP-DES

     [QM-AH-MD5-ESP-DES-MD5-SUITE]
     Protocols=              QM-AH-MD5,QM-ESP-DES-MD5

     [QM-ESP-DES-MD5-AH-MD5-SUITE]
     Protocols=              QM-ESP-DES-MD5,QM-AH-MD5

     # Quick mode protocols

     # DES

     [QM-ESP-DES]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-DES-XF

     [QM-ESP-DES-MD5]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-DES-MD5-XF

     [QM-ESP-DES-MD5-PFS]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-DES-MD5-PFS-XF

     [QM-ESP-DES-SHA]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-DES-SHA-XF

     # 3DES

     [QM-ESP-3DES-SHA]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-3DES-SHA-XF

     [QM-ESP-3DES-SHA-PFS]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-3DES-SHA-PFS-XF

     [QM-ESP-3DES-SHA-TRP]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-3DES-SHA-TRP-XF

     # AES

     [QM-ESP-AES-SHA]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-AES-SHA-XF

     [QM-ESP-AES-SHA-PFS]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-AES-SHA-PFS-XF

     [QM-ESP-AES-SHA-TRP]
     PROTOCOL_ID=            IPSEC_ESP
     Transforms=             QM-ESP-AES-SHA-TRP-XF

     # AH MD5

     [QM-AH-MD5]
     PROTOCOL_ID=            IPSEC_AH
     Transforms=             QM-AH-MD5-XF

     [QM-AH-MD5-PFS]
     PROTOCOL_ID=            IPSEC_AH
     Transforms=             QM-AH-MD5-PFS-XF

     # Quick mode transforms

     # ESP DES+MD5

     [QM-ESP-DES-XF]
     TRANSFORM_ID=           DES
     ENCAPSULATION_MODE=     TUNNEL
     Life=                   Default-phase-2-lifetime

     [QM-ESP-DES-MD5-XF]
     TRANSFORM_ID=           DES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_MD5
     Life=                   Default-phase-2-lifetime

     [QM-ESP-DES-MD5-PFS-XF]
     TRANSFORM_ID=           DES
     ENCAPSULATION_MODE=     TUNNEL
     GROUP_DESCRIPTION=      MODP_1024
     AUTHENTICATION_ALGORITHM=       HMAC_MD5
     Life=                   Default-phase-2-lifetime

     [QM-ESP-DES-SHA-XF]
     TRANSFORM_ID=           DES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     Life=                   Default-phase-2-lifetime

     # 3DES

     [QM-ESP-3DES-SHA-XF]
     TRANSFORM_ID=           3DES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     Life=                   Default-phase-2-lifetime

     [QM-ESP-3DES-SHA-PFS-XF]
     TRANSFORM_ID=           3DES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-2-lifetime

     [QM-ESP-3DES-SHA-TRP-XF]
     TRANSFORM_ID=           3DES
     ENCAPSULATION_MODE=     TRANSPORT
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     Life=                   Default-phase-2-lifetime

     # AES

     [QM-ESP-AES-SHA-XF]
     TRANSFORM_ID=           AES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     Life=                   Default-phase-2-lifetime

     [QM-ESP-AES-SHA-PFS-XF]
     TRANSFORM_ID=           AES
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-2-lifetime

     [QM-ESP-AES-SHA-TRP-XF]
     TRANSFORM_ID=           AES
     ENCAPSULATION_MODE=     TRANSPORT
     AUTHENTICATION_ALGORITHM=       HMAC_SHA
     Life=                   Default-phase-2-lifetime

     # AH

     [QM-AH-MD5-XF]
     TRANSFORM_ID=           MD5
     ENCAPSULATION_MODE=     TUNNEL
     AUTHENTICATION_ALGORITHM=       HMAC_MD5
     Life=                   Default-phase-2-lifetime

     [QM-AH-MD5-PFS-XF]
     TRANSFORM_ID=           MD5
     ENCAPSULATION_MODE=     TUNNEL
     GROUP_DESCRIPTION=      MODP_1024
     Life=                   Default-phase-2-lifetime

     [Sample-Life-Time]
     LIFE_TYPE=              SECONDS
     LIFE_DURATION=          3600,1800:7200

     [Sample-Life-Volume]
     LIFE_TYPE=              KILOBYTES
     LIFE_DURATION=          1000,768:1536

SEE ALSO

     keynote(1), ipsec(4), keynote(4), isakmpd.policy(5), isakmpd(8)

BUGS

     The RFCs do not permit differing DH groups in the same proposal for aggressive and quick
     mode exchanges.  Mixing both PFS and non-PFS suites in a quick mode proposal is not
     possible, as PFS implies using a DH group.