NAME

     syslog.conf — configuration file for syslogd(8)

DESCRIPTION

     The syslog.conf file is the configuration file for the syslogd(8) program.  It consists of
     lines with two fields: the selector field which specifies the types of messages and
     priorities to which the line applies, and an action field which specifies the action to be
     taken if a message syslogd receives matches the selection criteria.  The selector field is
     separated from the action field by one or more tab or space characters. A rule can be split
     in several lines if all lines except the last are terminated with a backslash (``´').

     The Selectors function are encoded as a facility, a period (``.''), and a level, with no
     intervening white-space.  Both the facility and the level are case insensitive.

     The facility describes the part of the system generating the message, and is one of the
     following keywords: auth, authpriv, cron, daemon, kern, lpr, mail, mark, news, syslog, user,
     uucp and local0 through local7.  These keywords (with the exception of mark) correspond to
     the similar “LOG_” values specified to the openlog(3) and syslog(3) library routines.

     The level describes the severity of the message, and is a keyword from the following ordered
     list (higher to lower): emerg, alert, crit, err, warning, notice and debug.  These keywords
     correspond to the similar (LOG_) values specified to the syslog library routine.

     See syslog(3) for a further descriptions of both the facility and level keywords and their
     significance.

     If a received message matches the specified facility and is of the specified level (or a
     higher level), the action specified in the action field will be taken.

     Multiple selectors may be specified for a single action by separating them with semicolon
     (``;'') characters.  It is important to note, however, that each selector can modify the
     ones preceding it.

     Multiple facilities may be specified for a single level by separating them with comma
     (``,'') characters.

     An asterisk (``*'') can be used to specify all facilities or all levels.

     By default, a level applies to all messages with the same or higher level.  The equal
     (``='') character can be prepended to a level to restrict this line of the configuration
     file to messages with the very same level.

     An exclamation mark (``!'') prepended to a level or the asterisk means that this line of the
     configuration file does not apply to the specified level (and higher ones). In conjunction
     with the equal sign, you can exclude single levels as well.

     The special facility ``mark'' receives a message at priority ``info'' every 20 minutes (see
     syslogd(8)).  This is not enabled by a facility field containing an asterisk.

     The special level ``none'' disables a particular facility.

     The action field of each line specifies the action to be taken when the selector field
     selects a message.  There are five forms:

     ·   A pathname (beginning with a leading slash).  Selected messages are appended to the
         file.

         You may prepend a minus (``-'') to the path to omit syncing the file after each message
         log. This can cause data loss at system crashes, but increases performance for programs
         which use logging extensively.

     ·   A named pipe (fifo), beginning with a vertical bar (``|'') followed by a pathname. The
         pipe must be created with mkfifo(8) before syslogd reads its configuration file.  This
         feature is especially useful fo debugging.

     ·   A hostname (preceded by an at (``@'') sign).  Selected messages are forwarded to the
         syslogd program on the named host.

     ·   A comma separated list of users.  Selected messages are written to those users if they
         are logged in.

     ·   An asterisk.  Selected messages are written to all logged-in users.

     Blank lines and lines whose first non-blank character is a hash (``#'') character are
     ignored.

EXAMPLES

     A configuration file might appear as follows:

     # Log all kernel messages, authentication messages of
     # level notice or higher and anything of level err or
     # higher to the console.
     # Don't log private authentication messages!
     *.err;kern.*;auth.notice;authpriv.none  /dev/console

     # Log anything (except mail) of level info or higher.
     # Don't log private authentication messages!
     *.info;mail.none;authpriv.none          /var/log/messages

     # The authpriv file has restricted access.
     authpriv.*                                              /var/log/secure

     # Log all the mail messages in one place.
     mail.*                                                  /var/log/maillog

     # Everybody gets emergency messages, plus log them on another
     # machine.
     *.emerg                                                 *
     *.emerg                                                 @arpa.berkeley.edu

     # Root and Eric get alert and higher messages.
     *.alert                                                 root,eric

     # Save mail and news errors of level err and higher in a
     # special file.
     uucp,news.crit                                          /var/log/spoolerr

FILES

     /etc/syslog.conf  The syslogd(8) configuration file.

BUGS

     The effects of multiple selectors are sometimes not intuitive.  For example
     ``mail.crit,*.err'' will select ``mail'' facility messages at the level of ``err'' or
     higher, not at the level of ``crit'' or higher.

SEE ALSO

     syslog(3), syslogd(8)