Provided by: cpl-plugin-muse-doc_1.2.1+dfsg-2_all 
NAME
muse_flat - Combine several separate flat images into one master flat file, trace slice
locations, and locate dark pixels.
SYNOPSIS
esorex muse_flat [OPTIONS] FILE.sof
DESCRIPTION
This recipe combines several separate flat-field images into one master flat-field file
and traces the location of the slices on the CCD. The master flat contains the combined
pixel values of the raw flat exposures, with respect to the image combination method used,
normalized to the mean flux. The trace table contains polynomials defining the location of
the slices on the CCD. Processing trims the raw data and records the overscan statistics,
subtracts the bias (taking account of the overscan, if --overscan is not &none&), and
optionally, the dark from each raw input image, converts them from adu to count, scales
them according to their exposure time, and combines the exposures using input parameters.
To trace the position of the slices on the CCD, their edges are located using a threshold
method. The edge detection is repeated at given intervals thereby tracing the central
position (the mean of both edges) and width of each slit vertically across the CCD.
Deviant positions of detections on CCD rows can be detected and excluded before fitting a
polynomial to all positions measured for one slice. The polynomial parameters for each
slice are saved in the output trace table. Finally, the area between the now known slice
edges is searched for dark (and bright) pixels, using statistics in each row of the master
flat.
OPTIONS
--nifu <long>
IFU to handle. If set to 0, all IFUs are processed serially. If set to -1, all IFUs
are processed in parallel. (long; default: 0). The full name of this option for the
EsoRex configuration file is muse.muse_flat.nifu [default = 0].
--overscan <str>
If this is "none", stop when detecting discrepant overscan levels (see ovscsigma),
for "offset" it assumes that the mean overscan level represents the real offset in
the bias levels of the exposures involved, and adjusts the data accordingly; for
"vpoly", a polynomial is fit to the vertical overscan and subtracted from the whole
quadrant. (str; default: ´vpoly´). The full name of this option for the EsoRex
configuration file is muse.muse_flat.overscan [default = vpoly].
--ovscreject <str>
This influences how values are rejected when computing overscan statistics. Either
no rejection at all ("none"), rejection using the DCR algorithm ("dcr"), or
rejection using an iterative constant fit ("fit"). (str; default: ´dcr´). The full
name of this option for the EsoRex configuration file is muse.muse_flat.ovscreject
[default = dcr].
--ovscsigma <float>
If the deviation of mean overscan levels between a raw input image and the
reference image is higher than |ovscsigma x stdev|, stop the processing. If
overscan="vpoly", this is used as sigma rejection level for the iterative
polynomial fit (the level comparison is then done afterwards with |100 x stdev| to
guard against incompatible settings). Has no effect for overscan="offset". (float;
default: 30.0). The full name of this option for the EsoRex configuration file is
muse.muse_flat.ovscsigma [default = 30.0].
--ovscignore <long>
The number of pixels of the overscan adjacent to the data region of the CCD that
are ignored when computing statistics or fits. (long; default: 3). The full name of
this option for the EsoRex configuration file is muse.muse_flat.ovscignore [default
= 3].
--combine <str>
Type of combination to use (str; default: ´sigclip´). The full name of this option
for the EsoRex configuration file is muse.muse_flat.combine [default = sigclip].
--nlow <long>
Number of minimum pixels to reject with minmax (long; default: 1). The full name of
this option for the EsoRex configuration file is muse.muse_flat.nlow [default = 1].
--nhigh <long>
Number of maximum pixels to reject with minmax (long; default: 1). The full name of
this option for the EsoRex configuration file is muse.muse_flat.nhigh [default =
1].
--nkeep <long>
Number of pixels to keep with minmax (long; default: 1). The full name of this
option for the EsoRex configuration file is muse.muse_flat.nkeep [default = 1].
--lsigma <float>
Low sigma for pixel rejection with sigclip (float; default: 3.0). The full name of
this option for the EsoRex configuration file is muse.muse_flat.lsigma [default =
3.0].
--hsigma <float>
High sigma for pixel rejection with sigclip (float; default: 3.0). The full name of
this option for the EsoRex configuration file is muse.muse_flat.hsigma [default =
3.0].
--scale <bool>
Scale the individual images to a common exposure time before combining them. (bool;
default: True). The full name of this option for the EsoRex configuration file is
muse.muse_flat.scale [default = True].
--normalize <bool>
Normalize the master flat to the average flux (bool; default: True). The full name
of this option for the EsoRex configuration file is muse.muse_flat.normalize
[default = True].
--trace <bool>
Trace the position of the slices on the master flat (bool; default: True). The full
name of this option for the EsoRex configuration file is muse.muse_flat.trace
[default = True].
--nsum <long>
Number of lines over which to average when tracing (long; default: 32). The full
name of this option for the EsoRex configuration file is muse.muse_flat.nsum
[default = 32].
--order <long>
Order of polynomial fit to the trace (long; default: 5). The full name of this
option for the EsoRex configuration file is muse.muse_flat.order [default = 5].
--edgefrac <float>
Fractional change required to identify edge when tracing (float; default: 0.5). The
full name of this option for the EsoRex configuration file is
muse.muse_flat.edgefrac [default = 0.5].
--losigmabadpix <float>
Low sigma to find dark pixels in the master flat (float; default: 5.0). The full
name of this option for the EsoRex configuration file is
muse.muse_flat.losigmabadpix [default = 5.0].
--hisigmabadpix <float>
High sigma to find bright pixels in the master flat (float; default: 5.0). The full
name of this option for the EsoRex configuration file is
muse.muse_flat.hisigmabadpix [default = 5.0].
--samples <bool>
Create a table containing all tracing sample points. (bool; default: False). The
full name of this option for the EsoRex configuration file is
muse.muse_flat.samples [default = False].
--merge <bool>
Merge output products from different IFUs into a common file. (bool; default:
False). The full name of this option for the EsoRex configuration file is
muse.muse_flat.merge [default = False].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the muse pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/muse/muse-pipeline-cookbook-1.2.1.pdf
An overview over the existing ESO pipelines can be found on the web page
http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the muse pipeline are muse_ampl(7), muse_astrometry(7), muse_bias(7),
muse_create_sky(7), muse_dark(7), muse_exp_align(7), muse_exp_combine(7),
muse_geometry(7), muse_lsf(7), muse_qi_mask(7), muse_scibasic(7), muse_scipost(7),
muse_scipost_apply_astrometry(7), muse_scipost_calibrate_flux(7),
muse_scipost_combine_pixtables(7), muse_scipost_correct_dar(7),
muse_scipost_correct_rv(7), muse_scipost_make_cube(7), muse_scipost_subtract_sky(7),
muse_scipost_subtract_sky_simple(7), muse_standard(7), muse_twilight(7), muse_wavecal(7)
VERSION
muse_flat 1.2.1
AUTHOR
Peter Weilbacher (based on Joris Gerssen's draft) <usd-help@eso.org>
BUG REPORTS
Please report any problems to usd-help@eso.org. Alternatively, you may send a report to
the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the MUSE Instrument Pipeline Copyright (C) 2005, 2015 European
Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02111-1307 USA