Provided by: fence-agents_4.0.22-2_amd64 
NAME
fence_docker - Fence agent for Docker
DESCRIPTION
fence_docker is I/O fencing agent which can be used with the Docker Engine containers. You can use this
fence-agent without any authentication, or you can use TLS authentication (use --ssl option, more info
about TLS authentication in docker: http://docs.docker.com/examples/https/).
fence_docker accepts options on the command line as well as from stdin. Fenced sends parameters through
stdin when it execs the agent. fence_docker can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: www.docker.io
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 80)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always
required.
-z, --ssl
Use SSL connection with verifying certificate
--ssl-insecure
Use SSL connection without verifying certificate
--ssl-secure
Use SSL connection with verifying certificate
--tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlskey
Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--gnutlscli-path=[path]
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
--api-version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device.
Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained
without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipaddr IP address or hostname of fencing device This parameter is always required.
ipport TCP/UDP port to use for connection with device (Default Value: 80)
method Method to fence (onoff|cycle) (Default Value: onoff)
port Physical plug number on device, UUID or identification of machine This parameter is always
required.
ssl Use SSL connection with verifying certificate
ssl_insecure
Use SSL connection without verifying certificate
ssl_secure
Use SSL connection with verifying certificate
tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlskey Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
gnutlscli_path
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
api_version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)