Provided by: mkvtoolnix_19.0.0-1_amd64 bug

NAME

       mkvinfo - Print information about elements in Matroska files

개요

       mkvinfo [options] {source-filename}

설명

       This program lists all elements contained in a Matroska. The output can be limited to a
       list of tracks in the file including information about the codecs used.

       -g, --gui
           Start the GUI. This option is only available if mkvinfo was compiled with GUI support.

       -c, --checksums
           Calculates and display the Adler32 checksum for each frame. Useful for debugging only.

       -s, --summary
           Only show a terse summary of what mkvinfo(1) finds and not each element.

       -t, --track-info
           Show statistics for each track in verbose mode. Also sets verbosity to 1 if it was at
           level 0 before.

       -x, --hexdump
           각 프레임의 처음 16바이트를 16진수 덤프로 표시합니다.

       -X, --full-hexdump
           각 프레임의 모든 바이트를 16진수 덤프로 표시합니다.

       -z, --size
           헤더를 포함한 각 요소의 크기를 표시합니다.

       --command-line-charset 문자셋
           명령행에 주어진 문자열을 변환할 문자셋을 정합니다. 기본값은 현재 시스템 로케일에 따른
           문자셋입니다.

       --output-charset 문자셋
           출력할 문자열을 변환할 문자셋을 정합니다. 기본값은 현재 시스템 로케일에 따른
           문자셋입니다.

       -r, --redirect-output 파일명
           Writes all messages to the file file-name instead of to the console. While this can be
           done easily with output redirection there are cases in which this option is needed:
           when the terminal reinterprets the output before writing it to a file. The character
           set set with --output-charset is honored.

       --ui-language 코드
           언어 코드의 번역을 강제로 사용합니다 (예: 강제 사용할 독일어 번역 코드는 'de_DE').
           'list'를 코드로 입력하면 mkvextract(1) 에서 이용 가능한 번역 목록을 출력할 것입니다.

       --debug 토픽
           특정 기능에 대해 디버깅을 켭니다. 이 기능은 개발자에게만 유용합니다.

       --engage 기능
           Turn on experimental features. A list of available features can be requested with
           mkvinfo --engage list. These features are not meant to be used in normal situations.

       --gui-mode
           GUI 모드를 켭니다. 이 모드에서는 GUI 동작시 무슨 일이 일어나는지 알려줄 수 있는
           특별하게 형식화된 줄을 출력할 것입니다. 이 메시지들은 '#GUI#message' 형식을 따릅니다.
           이 메시지 뒤에 '#GUI#message#key1=value1#key2=value2...' 형태의 키/값 쌍이 붙을 수
           있습니다. 메시지나 키값들은 결코 번역되지 않고 항상 영어로 출력됩니다.

           This switch has nothing to do with the --gui parameter which causes mkvinfo to display
           its own GUI.

       -v, --verbose
           Be more verbose. See the section about verbosity levels for a description which
           information will be output at which level.

       -h, --help
           사용법에 관한 정보를 표시하고 종료합니다.

       -V, --version
           버전 정보를 표시하고 종료합니다.

       @옵션 파일.json
           추가 명령행 인수는 옵션-파일 파일에서 읽어보세요. 이러한 파일용 지원 형식에 대한
           자세한 설명은 mkvmerge(1) man page에서 "옵션 파일"이라는 섹션을 참고하세요.

VERBOSITY LEVELS

       The -v option can be used to increase mkvinfo(1)'s verbosity level and print more
       information about the current file.

       At level 0 mkvinfo(1) will print only the track headers it finds and their types.
       mkvinfo(1) will exit as soon as the headers are parsed completely (more technical: as soon
       as the first cluster is encountered). In this level the seek head entries and the cues
       will not be displayed -- even if they're located in front of the track information.

       At level 1 mkvinfo(1) will also print all Matroska elements encountered for the complete
       file but the seek head entries and the cue entries. If the summary mode is enabled then
       mkvinfo(1) will output the frame position as well.

       At level 2 mkvinfo(1) will also print the seek head entries, the cue entries and the file
       position at which each Matroska element can be found at.

       At level 3 and above mkvinfo(1) will print some information that is not directly connected
       to a Matroska element. All other elements only print stuff about the elements that were
       just found. Level 3 adds meta information to ease debugging (read: it's intended for
       developers only). All lines written by level 3 are enclosed in square brackets to make
       filtering them out easy.

텍스트 파일과 문자셋 변환

       For an in-depth discussion about how all tools in the MKVToolNix suite handle character
       set conversions, input/output encoding, command line encoding and console encoding please
       see the identically-named section in the mkvmerge(1) man page.

종료 코드

       mkvinfo(1) exits with one of three exit codes:

       ·   0 -- This exit codes means that the run has completed successfully.

       ·   1 -- In this case mkvinfo(1) has output at least one warning, but the run did
           continue. A warning is prefixed with the text 'Warning:'.

       ·   2 -- This exit code is used after an error occurred.  mkvinfo(1) aborts right after
           outputting the error message. Error messages range from wrong command line arguments
           over read/write errors to broken files.

텍스트에서 특수 문자 이스케이프 처리

       There are a few places in which special characters in text must or should be escaped. The
       rules for escaping are simple: each character that needs escaping is replaced with a
       backslash followed by another character.

       The rules are: ' ' (a space) becomes '\s', '"' (double quotes) becomes '\2', ':' becomes
       '\c', '#' becomes '\h' and '\' (a single backslash) itself becomes '\\'.

환경 변수

       mkvinfo(1) uses the default variables that determine the system's locale (e.g.  LANG and
       the LC_* family). Additional variables:

       MKVINFO_DEBUG, MKVTOOLNIX_DEBUG and its short form MTX_DEBUG
           The content is treated as if it had been passed via the --debug option.

       MKVINFO_ENGAGE, MKVTOOLNIX_ENGAGE and its short form MTX_ENGAGE
           The content is treated as if it had been passed via the --engage option.

       MKVINFO_OPTIONS, MKVTOOLNIX_OPTIONS and its short form MTX_OPTIONS
           The content is split on white space. The resulting partial strings are treated as if
           it had been passed as command line options. If you need to pass special characters
           (e.g. spaces) then you have to escape them (see the section about escaping special
           characters in text).

보기

       mkvmerge(1), mkvextract(1), mkvpropedit(1), mkvtoolnix-gui(1)

WWW

       The latest version can always be found at the MKVToolNix homepage[1].

AUTHOR

       Moritz Bunkus <moritz@bunkus.org>
           개발자

NOTES

        1. the MKVToolNix homepage
           https://mkvtoolnix.download/