Provided by: libsane-common_1.0.27-1~experimental3ubuntu2.4_all bug

NAME

       sane-bh - SANE backend for Bell+Howell Copiscan II series document scanners

DESCRIPTION

       The  sane-bh  library  implements  a  SANE (Scanner Access Now Easy) backend that provides
       access to Bell+Howell Copiscan II series document scanners.  The Copiscan II 6338 has been
       the  primary  scanner model used during development and testing, but since the programming
       interface for the entire series is consistent the backend should work  for  the  following
       scanner models.

              COPISCAN II 6338 Duplex Scanner with ACE
              COPISCAN II 2135 Simplex Scanner
              COPISCAN II 2137(A) Simplex Scanner (with ACE)
              COPISCAN II 2138A Simplex Scanner with ACE
              COPISCAN II 3238 Simplex Scanner
              COPISCAN II 3338(A) Simplex Scanner (with ACE)

       If  you  have  a  Bell+Howell  scanner  and  are able to test it with this backend, please
       contact sane-devel@lists.alioth.debian.org with the model number and testing results. Have
       a   look  at  http://www.sane-project.org/mailing-lists.html  concerning  subscription  to
       sane-devel. Additionally, the author is curious as to the likelihood of using this backend
       with  the  newer  4000  and 8000 series scanners.  If you have such a beast, please let me
       know.

       The Bell+Howell Copiscan II series document scanners  are  high  volume,  high  throughput
       scanners designed for document scanning applications.  As such, they are lineart/grayscale
       scanners supporting a fixed  number  of  fairly  low  resolutions  (e.g.  200/240/300dpi).
       However,  they  do  have  a  number  of interesting and useful features suited to needs of
       document imaging applications.  This backend attempts to support as many of these features
       as possible.

       The  main technical reference used in writing this backend is the Bell and Howell Copiscan
       II Remote SCSI Controller  (RSC)  OEM  Technical  Manual  Version  1.5.   The  Linux  SCSI
       programming  HOWTO,  the  SANE API documentation, and SANE source code were also extremely
       valuable resources.

       The latest backend release, additional information and helpful hints  are  available  from
       the backend homepage:
              http://www.martoneconsulting.com/sane-bh.html

DEVICE NAMES

       This backend expects device names of the form:

              special

       Where  special is the path-name for the special device that corresponds to a SCSI scanner.
       For SCSI scanners, the special device name must be a generic SCSI device or a  symlink  to
       such  a  device.   Under  Linux,  such  a  device  name takes a format such as /dev/sga or
       /dev/sg0, for example.  See sane-scsi(5) for details.

CONFIGURATION

       The contents of the bh.conf file is a list of device names that correspond to  Bell+Howell
       scanners.   See  sane-scsi(5)  on  details  of  what  constitutes  a  valid  device  name.
       Additionally, options can be specified; these lines begin with the  word  "option".   Each
       option  is described in detail below.  Empty lines and lines starting with a hash mark (#)
       are ignored.

OPTIONS

       The following options can be specified in the bh.conf file.

       disable-optional-frames
              This option prevents the backend from sending any optional frames.  This option may
              be  useful  when dealing with frontends which do not support these optional frames.
              When this option is in effect, the data is sent in a  SANE_FRAME_GRAY  frame.   The
              optional  frames  sent  by  this  backend  are:  SANE_FRAME_G31D,  SANE_FRAME_G32D,
              SANE_FRAME_G42D and SANE_FRAME_TEXT.  These  frames  are  generated  based  on  the
              compression and barcode options.  These frames are never sent in preview mode.

       fake-inquiry
              This  option  is  used  for  debugging  purposes  and  its  use  is not encouraged.
              Essentially, it allows the backend to initialize in the absence of a scanner.  This
              is useful for development and not much else.  This option must be specified earlier
              in the configuration file than the devices which are to be "faked".

FILES

       @CONFIGDIR@/bh.conf
              The backend configuration file (see also description of SANE_CONFIG_DIR below).

       @LIBDIR@/libsane-bh.a
              The static library implementing this backend.

       @LIBDIR@/libsane-bh.so
              The shared library implementing this  backend  (present  on  systems  that  support
              dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This  environment  variable  specifies the list of directories that may contain the
              configuration file.  Under UNIX, the directories are separated by  a  colon  (`:'),
              under OS/2, they are separated by a semi-colon (`;').  If this variable is not set,
              the configuration file is searched in two default directories: first,  the  current
              working  directory  (".") and then in @CONFIGDIR@.  If the value of the environment
              variable ends with the directory separator character, then the default  directories
              are  searched  after  the  explicitly  specified directories.  For example, setting
              SANE_CONFIG_DIR to "/tmp/config:" would result in  directories  "tmp/config",  ".",
              and "@CONFIGDIR@" being searched (in this order).

       SANE_DEBUG_BH
              If  the  library was compiled with debug support enabled, this environment variable
              controls the debug level for this backend.  E.g., a value of 255 requests all debug
              output to be printed.  Smaller levels reduce verbosity.

SUPPORTED FEATURES

       ADF support
              With  document  scanners, automatic document feeder (ADF) support is a key feature.
              The backend supports the ADF by default and returns  SANE_STATUS_NO_DOCS  when  the
              out-of-paper  condition  is  detected.  The SANE frontend scanadf is a command line
              frontend that supports multi-page scans.  It has been used successfully  with  this
              backend.   The  SANE  frontend  xsane  is an improved GUI frontend by Oliver Rauch.
              Support for multi-page scans is included in xsane version 0.35 and above.

       Duplex scanning
              Some models, such as the COPISCAN II 6338, support duplex scanning.  That is,  they
              scan  both  sides  of  the  document  during a single pass through the scanner (the
              scanner has two cameras).  This backend supports duplex scanning (with the --duplex
              option).   The  front  and  back page images are delivered consecutively as if they
              were separately scanned pages.

       Hardware compression
              The scanner is capable of compressing  the  data  into  several  industry  standard
              formats  (CCITT  G3, CCITT G3-2D, CCITT G4).  This results in increased performance
              as less data is passed from the scanner to the host over the SCSI bus.  The backend
              supports  these  compression  formats  via  the  --g31d,  --g32d,  --g42d  options,
              respectively.  Many SANE frontends are not equipped to  deal  with  these  formats,
              however.   The  SANE  frontend  scanadf supports these optional frame formats.  The
              compressed image data is written directly to a file and can then be processed by  a
              scan-script  using  the  --scan-script  option.   Examples of this are given on the
              scanadf homepage.

       Automatic Border Detection
              The scanner can automatically detect the paper size and adjust the scanning  window
              geometry  appropriately.   The  backend  supports  this  useful  feature  with  the
              --autoborder option.  It is enabled by default.

       Batch Mode Scanning
              The batch scan mode allows for maximum throughput.  The Set Window parameters  must
              remain constant during the entire batch.

       Icon Generation
              The  Icon  function  generates  a  thumbnail  of  the  full page image, that can be
              transferred as if it were a separate page.  This allows the host to quickly display
              a  thumbnail representation during the scanning operation.  Perhaps this would be a
              great way of implementing a preview scan, but since a normal scan is so  quick,  it
              might not be worth the trouble.

       Multiple Sections
              Multiple  sections  (scanning  sub-windows)  can  be defined for the front and back
              pages.   Each  section  can  have   different   characteristics   (e.g.   geometry,
              compression).  The sections are returned as if they were separately scanned images.
              Additionally sections can be used to greatly enhance the accuracy and efficiency of
              the  barcode/patchcode  decoding  process  by  limiting  the search area to a small
              subset of the page.  Most Copiscan II series scanners support up to 8  user-defined
              sections.

       Support Barcode/Patchcode Decoding
              The  RSC  unit  can  recognize Bar and Patch Codes of various types embedded in the
              scanned image.  The codes are decoded and the data is returned to the frontend as a
              text  frame.   The  text is encoded in xml and contains a great deal of information
              about the decoded data such as the location where it was  found,  its  orientation,
              and  the  time  it  took  to find.  Further information on the content of this text
              frame as well as some barcode  decoding  examples  can  be  found  on  the  backend
              homepage.

LIMITATIONS

       Decoding a single barcode type per scan
              The RSC unit can search for up to six different barcode types at a time.  While the
              code generally supports this as well, the --barcode-search-bar option  only  allows
              the  user  to specify a single barcode type.  Perhaps another option which allows a
              comma separated list of barcode type codes could be added to address this.

       Scanning a fixed number of pages in batch mode
              The separation of front and back end functionality in SANE presents  a  problem  in
              supporting  the  'cancel  batch'  functionality in the scanner.  In batch mode, the
              scanner is always a page ahead of the host.  The host, knowing ahead of time  which
              page  will  be  the  last,  can cancel batch mode prior to initiating the last scan
              command.  Currently, there is no mechanism available for the frontend to pass  this
              knowledge  to the backend.  If batch mode is enabled and the --end-count terminates
              a scanadf session, an extra page will be pulled through the scanner, but is neither
              read  nor  delivered  to  the  frontend.   The  issue  can be avoided by specifying
              --batch=no when scanning a fixed number of pages.

       Revision 1.2 Patch detector
              There is an enhanced patchcode  detection  algorithm  available  in  the  RSC  with
              revision 1.2 or higher that is faster and more reliable than the standard Bar/Patch
              code decoder.  This is not currently supported.

OPTIONS

       Scan Mode Options:

       --preview[=(yes|no)] [no]
              Request a preview-quality scan.  When preview is set to yes  image  compression  is
              disabled and the image is delivered in a SANE_FRAME_GRAY frame.

       --mode lineart|halftone [lineart]
              Selects the scan mode (e.g., lineart,monochrome, or color).

       --resolution 200|240|300dpi [200]
              Sets  the  resolution  of the scanned image.  Each scanner model supports a list of
              standard resolutions; only these resolutions can be used.

       --compression none|g31d|g32d|g42d [none]
              Sets the compression mode of the scanner.  Determines the  type  of  data  returned
              from the scanner.  Values are:
              none - uncompressed data - delivered in a SANE_FRAME_GRAY frame
              g31d - CCITT G3 1 dimension (MH) - delivered in a SANE_FRAME_G31D frame
              g32d - CCITT G3 2 dimensions (MR, K=4) - delivered in a SANE_FRAME_G32D frame
              g42d - CCITT G4 (MMR) - delivered in a SANE_FRAME_G42D frame
              NOTE:  The  use  of  g31d,  g32d, and g42d compression values causes the backend to
              generate optional frame formats which may not be supported by all SANE frontends.

       Geometry Options:

       --autoborder[=(yes|no)] [yes]
              Enable/Disable automatic image  border  detection.   When  enabled,  the  RSC  unit
              automatically detects the image area and sets the window geometry to match.

       --paper-size Custom|Letter|Legal|A3|A4|A5|A6|B4|B5 [Custom]
              Specify  the  scan window geometry by specifying the paper size of the documents to
              be scanned.

       --tl-x 0..297.18mm [0]
              Top-left x position of scan area.

       --tl-y 0..431.8mm [0]
              Top-left y position of scan area.

       --br-x 0..297.18mm [297.18]
              Bottom-right x position of scan area.

       --br-y 0..431.8mm [431.8]
              Bottom-right y position of scan area.

       Feeder Options:

       --source Automatic Document Feeder|Manual Feed Tray [Automatic Document Feeder]
              Selects the scan source (such as a document feeder).  This option  is  provided  to
              allow multiple image scans with xsane; it has no other purpose.

       --batch[=(yes|no)] [no]
              Enable/disable  batch  mode  scanning.   Batch  mode  allows  scanning  at  maximum
              throughput by buffering within the RSC  unit.   This  option  is  recommended  when
              performing multiple pages scans until the feeder is emptied.

       --duplex[=(yes|no)] [no]
              Enable  duplex  (dual-sided)  scanning.  The scanner takes an image of each side of
              the document during a single pass through the scanner.  The front page is delivered
              followed  by  the  back  page.   Most options, such as compression, affect both the
              front and back pages.

       --timeout-adf 0..255 [0]
              Sets the timeout in seconds for the automatic document feeder (ADF).  The  value  0
              specifies the hardware default value which varies based on the scanner model.

       --timeout-manual 0..255 [0]
              Sets  the  timeout in seconds for semi-automatic feeder.  The value 0 specifies the
              hardware default value which varies based on the scanner model.

       --check-adf[=(yes|no)] [no]
              Check ADF Status prior to starting scan using the OBJECT  POSITION  command.   Note
              that  this  feature requires RSC firmware level 1.5 or higher and dip switch 4 must
              be in the on position.  NOTE: This option has not been tested extensively  and  may
              produce undesirable results.

       Enhancement:

       --control-panel[=(yes|no)] [yes]
              Enables  the  scanner's  control  panel for selecting image enhancement parameters.
              When the option is set to no the  following  options  are  used  to  control  image
              enhancement.   See the Bell+Howell scanner users' guide for complete information on
              ACE functionality.

       --ace-function -4..4 [3]
              Specify the Automatic Contrast Enhancement (ACE) Function.

       --ace-sensitivity 0..9 [5]
              Specify the Automatic Contrast Enhancement (ACE) Sensitivity.

       --brightness 0..255 [0]
              Controls the brightness of the acquired image.  Ignored for ACE capable scanners.

       --threshold 0..255 [0]
              Select minimum-brightness to get a white point.  Ignored for ACE capable scanners.

       --contrast 0..255 [inactive]
              Controls the contrast of the acquired image.  This option is not currently used  by
              the scanner (and perhaps never will be).

       --negative[=(yes|no)] [no]
              Swap black and white, yielding a reverse-video image.

       Icon:

       --icon-width 0..3600pel (in steps of 8) [0]
              Width of icon (thumbnail) image in pixels.

       --icon-length 0..3600pel (in steps of 8) [0]
              Length of icon (thumbnail) image in pixels.

       Barcode Options:

       --barcode-search-bar <see list> [none]
              Specifies  the  barcode  type  to  search for.  If this option is not specified, or
              specified with a value of none, then the barcode  decoding  feature  is  completely
              disabled.  The valid barcode type are:
              none
              ean-8
              ean-13
              reserved-ean-add
              code39
              code2-5-interleaved
              code2-5-3lines-matrix
              code2-5-3lines-datalogic
              code2-5-5lines-industrial
              patchcode
              codabar
              codabar-with-start-stop
              code39ascii
              code128
              code2-5-5lines-iata

       --barcode-search-count 1..7 [3]
              Number of times that the RSC performs the decoding algorithm.  Specify the smallest
              number possible to increase performance.  If you  are  having  trouble  recognizing
              barcodes, it is suggested that you increase this option to its maximum value (7).

       --barcode-search-mode <see list> [horiz-vert]
              Chooses the orientation of barcodes to be searched.  The valid orientations are:
              horiz-vert
              horizontal
              vertical
              vert-horiz

       --barcode-hmin 0..1660mm [5]
              Sets  the barcode minimum height in millimeters (larger values increase recognition
              speed).  Of course the actual barcodes in the document must be of sufficient size.

       --barcode-search-timeout 20..65535us [10000]
              Sets the timeout for barcode searching in milliseconds.  When the timeout  expires,
              the decoder will stop trying to decode barcodes.

       --section <string> []
              Specifies  a  series  of  image sections.  A section can be used to gather a subset
              image or to provide a small area for barcode decoding.  Each section  is  specified
              in the following format (units are in millimeters):

       <width>x<height>+<top-left-x>+<top-left-y>[:functioncode...]

       Multiple sections can be specified by separating them with commas.

       For  example  76.2x25.4+50.8+0:frontbar  identifies  an area 3 inches wide and 1 inch high
       with a top left corner at the top of the page two inches from the left hand  edge  of  the
       page.  This section will be used for barcode decoding on the front page only.

       For  example  50.8x25.4+25.4+0:frontbar:front:g42d  identifies an area 2 inches wide and 1
       inch high with a top left corner at the top of the page one inch from the left  hand  edge
       of  the page.  This section will be used for barcode decoding on the front page as well as
       generating an image compressed in g42d format.

       Ordinarily barcodes are searched in the entire image.  However, when you specify  sections
       all  barcode  searching  is  done  within  the  specific  sections  identified.   This can
       significantly speed up the decoding process.

       The following functioncodes are available:
              front - generate an image for the front page section
              back - generate an image for the back page section
              frontbar - perform barcode search in front page section
              backbar - perform barcode search in back page section
              frontpatch - perform patchcode search in front page section
              backpatch - perform patchcode search in back page section
              none - use no image compression
              g31d - use Group 3 1 dimension image compression
              g32d - use Group 3 2 dimensions image compression
              g42d - use Group 4 2 dimensions image compression

       If you omit a compression functioncode, the full page compression setting is used.  If you
       specify multiple compression functioncodes, only the last one is used.

       --barcode-relmax 0..255 [0]
              Specifies the maximum relation from the widest to the smallest bar.

       --barcode-barmin 0..255 [0]
              Specifies the minimum number of bars in Bar/Patch code.

       --barcode-barmax 0..255 [0]
              Specifies the maximum number of bars in a Bar/Patch code.

       --barcode-contrast 0..6 [3]
              Specifies  the  image  contrast used in decoding.  Use higher values when there are
              more white pixels in the code.

       --barcode-patchmode 0..1 [0]
              Controls Patch Code detection.

BUGS

       This is a new backend; detailed bug reports are welcome -- and expected ;)

       If you have found something that you think is a bug, please attempt to  recreate  it  with
       the  SANE_DEBUG_BH  environment  variable  set  to  255,  and  send a report detailing the
       conditions surrounding the bug to sane-devel@lists.alioth.debian.org.

SEE ALSO

       sane(7), sane-scsi(5), scanimage(1), scanadf(1)

AUTHOR

       The sane-bh backend was written by Tom Martone, based on the sane-ricoh backend  by  Feico
       W.  Dillema  and  the  bnhscan  program by Sean Reifschneider of tummy.com ltd.  Some 8000
       enhancements added by Mark Temple.

@PACKAGEVERSION@                           10 Jul 2008                                 sane-bh(5)